Dr Rodger EdwardsBSc, MSc, PhD, Ceng, MCIBSE

Reader

Full contact details
View graph of relations

Publications

  1. 2019
  2. Published

    Incorporating solar energy sources in low energy buildings in two major cities in Iran

    Edwards, R., 18 Jan 2019, In : Energy Procedia. 156, p. 85–89 5 p., https://doi.org/10.1016/j.egypro.2018.11.098.

    Research output: Contribution to journalArticle

  3. Accepted/In press

    Sustainability-Led Design: Feasibility of incorporating whole-life cycle energy assessment into BIM for refurbishment projects

    Edwards, R., Lou, E., Kamaruzzaman, S. N., Bataw, A. & Johnson, C., 18 Jan 2019, (Accepted/In press) In : Journal of Building Engineering.

    Research output: Contribution to journalArticle

  4. Published

    Development of a non-domestic building refurbishment scheme for Malaysia: A Delphi approach

    Kamaruzzaman, S. N., Lou, E. C. W., Wong, P. F., Edwards, R., Hamzah, N. & Ghani, M. K., 15 Jan 2019, In : Energy. 167, p. 804-818

    Research output: Contribution to journalArticle

  5. 2018
  6. Published

    Effects of mineral and superplasticizer admixtures on the mechanical behaviour of lightweight concrete

    Al-Sibahy, A. & Edwards, R., 2018, In : Proceedings of the ICE - Structures and Buildings .

    Research output: Contribution to journalArticle

  7. Published
  8. Published

    Optimisation of Flooding Recovery for Malaysian Universities

    Mohammed, N., Edwards, R. & Gale, A., 2018, In : Procedia Engineering. 212, p. 356-362 7 p.

    Research output: Contribution to journalArticle

  9. 2017
  10. Published

    Characterization of the Clay Masonry Units and Construction Technique at the Ancient City of Nippur

    Al-Sibahy, A. & Edwards, R., 15 Sep 2017, In : Engineering Structures. 147, p. 517-529 12 p.

    Research output: Contribution to journalArticle

  11. 2016
  12. Published

    Assessment Schemes for Sustainability Design through BIM: Lessons Learnt

    Kamaruzzaman, S. N., Salleh, H., Lou, E., Edwards, R. & Wong, P. F., Mar 2016, 4th International Building Control Conference 2016 (IBCC 2016). 5 p. 80

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. 2015
  14. Published

    Achieving energy and cost savings through simple daylighting controlin tropical historic buildings

    Kamaruzzaman, S. N., Edwards, R. & Che-Ani, E. M. A. Z. A. I., 2015, In : Energy and Buildings. 90, p. 85-93 8 p.

    Research output: Contribution to journalArticle

  15. 2014
  16. Published

    Behaviour of masonry wallettes made from a new concrete formulation under compression loads at ambient temperatures: Testing and modelling

    Al-Sibahy, A. & Edwards, R., 2014, In : Construction and Building Materials. 63, p. 271-280 9 p.

    Research output: Contribution to journalArticle

  17. Published

    Influence of display cabinet cooling on performance of supermarket buildings

    Hill, F., Edwards, R. & Levermore, G., 2014, In : Building Services Engineering Research & Technology: an international journal . 35, 2, p. 170-181 11 p.

    Research output: Contribution to journalArticle

  18. 2013
  19. Published

    Jones A., Shepherd D., Curran A., The EUCAMS gear partnership a model of industry/academic collaboration

    Phang, A., Starr, A., Allen, B., Sinha, J., Khan, M., Marshall, M., Rzeszucinski, P., Badi, QN., Edwards, R. & Chen, YK., 2 Aug 2013, Jones A., Shepherd D., Curran A., The EUCAMS gear partnership a model of industry/academic collaboration.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Published
  21. 2012
  22. Published

    Amplitude of probability density function (APDF) of vibration response as a robust tool for gearbox diagnosis

    Rzeszucinski, P. J., Sinha, J. K., Edwards, R., Starr, A. & Allen, B., Dec 2012, In : Strain. 48, 6, p. 510-516 6 p.

    Research output: Contribution to journalArticle

  23. Published

    Normalised Root Mean Square and Amplitude of Sidebands of Vibration response as Tools for Gearbox Diagnosis

    Rzeszucinki, P. J., Sinha, J. K., Edwards, R., Starr, A. & Allen, B., Dec 2012, In : Strain. 48, 6, p. 445-452 8 p.

    Research output: Contribution to journalArticle

  24. Published

    Mechanical and thermal properties of novel lightweight concrete mixtures containing recycled glass and metakaolin

    Al-Sibahy, A. & Edwards, R., Jun 2012, In : Construction and Building Materials. 31, p. 157-167 10 p.

    Research output: Contribution to journalArticle

  25. Published

    Thermal behaviour of novel lightweight concrete at ambient and elevated temperatures: Experimental, modelling and parametric studies

    Al-Sibahy, A. & Edwards, R., Jun 2012, In : Construction and Building Materials. 31, p. 174-187 13 p.

    Research output: Contribution to journalArticle

  26. Published

    The impact of Desert Solar Power Utilisation on Sustainable Development

    Shah, S. A., Edwards, R. & Zhang, Y., 2012, In : Applied Solar Energy. In-press

    Research output: Contribution to journalArticle

  27. 2011
  28. Published

    The effects of aspect ratio on heat transfer across air layers in a slot-ventilated wall cavity

    Odewole, A. & Rodger Edwards, R., Dec 2011, In : Journal of Engineering and Applied Sciences. 6, 12, p. 66-73 7 p.

    Research output: Contribution to journalArticle

  29. Published

    The characteristics of the velocity field in a slot-ventilated wall cavity

    Odewole, A. & Edwards, R., Oct 2011, In : Journal of Engineering and Applied Sciences. 6, 10, p. 47-55 8 p.

    Research output: Contribution to journalArticle

  30. Published

    Performance measurement based on a total quality approach

    Anvari, F. & Edwards, R., Jun 2011, In : International Journal of Productivity and Performance Management. 60, 5, p. 512-528 16 p.

    Research output: Contribution to journalArticle

  31. Published

    Maintenance engineering in capital-intensive manufacturing systems

    Anvari, F. & Edwards, R., 2011, In : Journal of Quality in Maintenance Engineering. 17, 4, p. 351-370 19 p.

    Research output: Contribution to journalArticle

  32. Published

    Mechanical behaviour of high metakaolin lightweight aggregate concrete

    Al-Sibahy, A. & Edwards, R., 2011, WIT Transactions on Modelling and Simulation|WIT Trans.Modell. Simul.. Wessex Institute of Technology, Vol. 51. p. 85-96 11 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    Sustainable Energy Generation Processes in the Deserts of Pakistan

    Shah, S. A. & Edwards, R., 2011, In : International Journal of Sustainable Energy. in press

    Research output: Contribution to journalArticle

  34. 2010
  35. Published

    Considering the Risk Factors of Reliability, Maintainability andProduct Life Cycle in a Zero Carbon Commercial Building

    Edwards, R., May 2010, host publication. Barrett, P. B., D. A., R. H., K. K. & C. P. (eds.). Salford,UK: University of Salford

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Published

    No title

    Edwards, R., May 2010, Proceedings of the CIB World Building Conference 2010. Barrett, P. B., D. A., R. H., K. K. & C. P. (eds.). Salford,UK: University of Salford

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Published

    The Implementation of Condition Monitoring Techniques for the Automated Generation of Display Energy Certificates

    Edwards, R. & Barrett, P. (ed.), May 2010, Proceedings of the CIB 2010 World Building Congress. Barrett, P. (ed.). Salford: University of Salford

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Published

    The Performance of Dwellings Specified by the UK Zero Carbon Homes Policy in Future Climate Conditions

    Edwards, R., May 2010, Proceedings of the CIB World Building Congress 2010. Barrett, P. B., Amaratunga, D., Haigh, R., K. K. & C. P. (eds.). Salford,UK: University of Salford

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Published

    Hybrid Energy Based and CO2 Sequestration Capable Desert Potential Development

    Shah, S. A., Zhang, Y. & Edwards, R., 2010, In : National University of engineering and technology (NUST) Journal of Engineering Sciences. 3, 1

    Research output: Contribution to journalArticle

  40. Published

    Methodology and theory evaluation of overall equipment effectiveness based on market

    Anvari, F., Edwards, R. & Starr, A., 2010, In : Journal of Quality in Maintenance Engineering. 16, 3, p. 256-270 14 p.

    Research output: Contribution to journalArticle

  41. Published

    Rational Revalidation

    Aleem, H. A., McCarthy, T. J. & Edwards, R., 2010, In : Journal of validation Technology. 16, 2, p. 83-92 10 p.

    Research output: Contribution to journalArticle

  42. 2008
  43. Published

    Integrated Equipment Effectiveness

    Anvari, F., Edwards, R. & Starr, A., Jul 2008, Fifth International Conference on Condition Monitoring and Machinery Failure Prevention Techniques.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. 2007
  45. Published

    Energy consumption of electricity end uses in Malaysian historic buildings

    Kamaruzzaman, S. N., Edwards, R. E. & Zawawi, E. M. A., Jul 2007, In : Energy and Environment. 18, 3-4, p. 393-402 9 p.

    Research output: Contribution to journalArticle

  46. 2006
  47. Published

    Second-hand smoke levels in UK pubs and bars: Do the English Public Health White Paper proposals go far enough?

    Edwards, R., Gee, I. L., Watson, A. F. R., Carrington, J., Edwards, P. R., Van Tongeren, M., McElduff, P. & Edwards, R. E., Mar 2006, In : Journal of Public Health. 28, 1, p. 17-23 6 p.

    Research output: Contribution to journalArticle

  48. Published

    Evaluating performance characteristics of electricity use of British historic buildings in Malaysia

    Kamaruzzaman, S. N. & Edwards, R. E., 2006, In : Facilities. 24, 3-4, p. 141-152 11 p.

    Research output: Contribution to journalArticle

  49. 2005
  50. Published

    Handbook of Domestic Ventilation

    Edwards, R. E., Jun 2005, Elsevier BV.

    Research output: Book/ReportAnthology

  51. Published

    Electricity consumption of refurbished historic buildings in Malaysia

    Kamaruzzaman, S. N., Edwards, R. & Dewsbury, J., 14 Apr 2005, 5th International Postgraduate Research Conference, University of Salford, UK.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  52. 2004
  53. Published

    Determining when to use modular construction

    Greally, D. & Edwards, R., May 2004, In : Pharmaceutical Engineering. 24, 3, p. 36-46 10 p.

    Research output: Contribution to journalArticle

  54. Published

    Environmental tobacco smoke

    Edwards, R., Edwards, P. R., Van Tongeren, M., Watson, A., Gee, I. & Edwards, R. E., May 2004, In : Occupational and Environmental Medicine. 61, 5, p. 385-386 1 p.

    Research output: Contribution to journalArticle

  55. Published

    Finite Element analysis of stress distribution and the effect of geometry in laser-generated single-stage ceramic tile grout sealing using ANSYS

    Gale, A., Lawrence, J., Lim, K. C., Li, L. & Edwards, R., 2004, In : Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 218, 10, p. 1227-1227

    Research output: Contribution to journalArticle

  56. Published

    UK Country Profile: Education and Training

    Edwards, R., 2004, In : Pharmaceutical Engineering. 28, 6, p. 78-79 2 p.

    Research output: Contribution to journalArticle

  57. 2003
  58. Published

    Optimisation of the curvature of laser generated single-stage ceramic tile grout seal with finite element method

    Lim, KC., Lawrence, J., Li, L., Edwards, R. & Gale, A. W., Oct 2003, Proc. of 22nd International Congress on Application of Lasers & Electro-Optics (ICALEO’03), Jacksonville, Florida, USA.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Published

    Porosity/bubble formation mechanism in laser surface enamelling

    Akhter, R., Li, L., Edwards, R. E. & Gale, A. W., 15 Mar 2003, In : Applied Surface Science. 208-209, 1, p. 447-452 5 p.

    Research output: Contribution to journalArticle

  60. Published

    Rapid laser surface enamelling by powder feeding technique

    Akhter, R., Li, L., Edwards, R. E. & Gale, A. W., 15 Mar 2003, In : Applied Surface Science. 208-209, 1, p. 453-457 4 p.

    Research output: Contribution to journalArticle

  61. Published

    The influence of bend angles upon the performance of Passive Stack Duct systems within Dwellings

    Edwards, R., Feb 2003, In : International Journal of Ventilation. 1, 3, p. 225-231 7 p.

    Research output: Contribution to journalArticle

  62. 2002
  63. Published

    The removal of industrial epoxy grout using a high-power diode laser

    Minami, K., Lawrence, J., Li, L., Edwards, R. E. & Gale, A. W., Dec 2002, In : Optics and Lasers in Engineering. 38, 6, p. 485-498 13 p.

    Research output: Contribution to journalArticle

  64. Published

    The influence of process gas type on the enamel surface condition of a high power diode laser generated single-stage ceramic tile grout seal

    Lawrence, J., Li, L., Edwards, R. E. & Gale, A. G., 1 Oct 2002, In : Surface and Coatings Technology. 160, 1, p. 7-13 6 p.

    Research output: Contribution to journalArticle

  65. Published

    A portable high-power diode laser-based single-stage ceramic tile grout sealing system

    Lawrence, J., Schmidt, M. J. J., Li, L., Edwards, R. E. & Gale, A. W., Feb 2002, In : Optics and Laser Technology. 34, 1, p. 27-36 9 p.

    Research output: Contribution to journalArticle

  66. Published

    Effect of processing gas in high power diode laser ablation of tile grout

    Minami, K., Lawrence, J., Li, L., Edwards, R. E., Gale, A. W. & Laurence, D., 28 Jan 2002, In : Applied Surface Science. 186, 1-4, p. 264-270 6 p.

    Research output: Contribution to journalArticle

  67. Published
  68. Published

    A high power diode laser-based ceramic tile grout sealing system: grout characteristics, hand-held sealing system development and associated safety aspects

    Lawrence, J., Schmidt, MJJ., Li, L., Edwards, R. & Gale, A. W., 2002, Recent Research Developments in Materials Science & Engineering. Vol. 37/661.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  69. Published

    Determination of the absorption length of CO2, Nd:YAG and High power diode laser radiation for selected grouting materials

    Lawrence, J., Minami, K., Edwards, R. E., Li, L. & Gale, A., 2002, In : Applied Surface Science. 186

    Research output: Contribution to journalArticle

  70. Published

    Effect of Process Gas on High Power Diode Laser Ablation of Tile Grout

    Minami, K., Lawrence, J., Li, L., Edwards, R. E. & Gale, A., 2002, In : Applied Surface Science. 186

    Research output: Contribution to journalArticle

  71. Published

    The influence of process gas type on the enamel surface condition of a high power diode laser generated single-sage ceramic tile grout seal

    Lawrence, J., Li, L., Edwards, R. E. & Gale, A., 2002, In : Surface and Coating Technology. 160

    Research output: Contribution to journalArticle

  72. Published

    The removal industrial epoxy grout using a high power diode laser

    Minami, K., Lawrence, J., Li, L., Edwards, R. E. & Gale, A., 2002, In : Optics and Lasers in Engineering. 38

    Research output: Contribution to journalArticle

  73. Published

    Transferring a genetically engineered biopharmaceutical from research to clinical development - Impact on facility design and build projects

    Greally, D. & Edwards, R., 2002, In : Pharmaceutical Engineering. 22, 4, p. 35-46 11 p.

    Research output: Contribution to journalArticle

  74. 2001
  75. Published

    High power diode laser-based grout removal process

    Minami, K., Lawrence, J., Li, L., Edwards, R. & Gale, A. W., Oct 2001, International Congress on Application of Lasers and Opto-electronics (ICALEO’01), Jacksonville, Florida USA,.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  76. Published

    The mechanical, physical and chemical characteristics of high power diode laser generated single-stage ceramic tile grout

    Lawrence, J., Li, L., Edwards, R. & Gale, A. W., Oct 2001, International Congress on Application of Lasers and Opto-electronics (ICALEO’01), Jacksonville, Florida USA,.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  77. Published

    Automation of the Documentation Preparation Process in an Automated, Bulk Pharmaceutical Facility

    McNulty, J. & Edwards, R., May 2001, In : Pharmaceutical Engineering. 21, 3, p. 28-44 16 p.

    Research output: Contribution to journalArticle

  78. 2000
  79. Published

    The Effect of Geographical Location and Thermal Insulation on the Standard Procedure Energy Rating

    Hiley, A., Letherman, K. M. & Edwards, R., Dec 2000, (The Effect of Geographical Location and Thermal Insulation on the Standard Procedure Energy Rating).

    Research output: Working paper

  80. 1997
  81. Published

    Advanced fabric energy storage I: Review

    Winwood, R., Benstead, R. & Edwards, R., 1997, In : Building Services Engineering Research and Technology. 18, 1, p. 1-6 5 p.

    Research output: Contribution to journalArticle

  82. Published

    Advanced fabric energy storage II: Computational fluid dynamics modelling

    Winwood, R., Benstead, R. & Edwards, R., 1997, In : Building Services Engineering Research and Technology. 18, 1, p. 7-16 9 p.

    Research output: Contribution to journalArticle

  83. Published

    Advanced fabric energy storage III: Theoretical analysis and whole-building simulation

    Winwood, R., Benstead, R. & Edwards, R., 1997, In : Building Services Engineering Research and Technology. 18, 1, p. 17-24 7 p.

    Research output: Contribution to journalArticle

  84. 1996
  85. Published

    The use of infrared controlled air terminals in an office building.

    Francis, J. & Edwards, R. E., 1996, Proceedings of CIBSE/ASHRAE Joint National Conference Part Two. p. 311-320 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. Published

    Ventilation for humidity control: Measurements in a ventilation test house

    Palin, S. L., McIntyre, D. A. & Edwards, R. E., 1996, In : Building Services Engineering Research and Technology. 17, 2, p. 79-84 5 p.

    Research output: Contribution to journalArticle

  87. 1995
  88. Published

    Options for domestic relative humidity control - comparative trials.

    Edwards, R. & Maroni, M. (ed.), 1995, Proceedings of Healthy Buildings 95. Maroni, M. (ed.). p. 1805-1810 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  89. 1989
  90. Published

    Building services performance and the sick building syndrome

    Dewsbury, J., Edwards, R. & Letherman, K., 1989, British Occupational Hygiene Society annual conference, University of Warwick, England.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  91. 1987
  92. Published

    AIRFLOW MEASUREMENT BETWEEN THREE CONNECTED CELLS.

    Irwin, C. & Edwards, R. E., 1987, In : Building Services Engineering Research and Technology. 8, 4, p. 91-96 5 p.

    Research output: Contribution to journalArticle

  93. 1985
  94. Published

    The measurement of airflows using a rapid response tracer gas technique.

    Irwin, C., Edwards, R. E. & Howarth, A. T., 1985, In : Building Services Engineering Research and Technology. 6, 4, p. 146-152

    Research output: Contribution to journalArticle

Research Explorer downloads

78

Research output: Chapter in Book/Report/Conference proceedingConference contribution