Prof Phil Prangnell

Professor

Full contact details
View graph of relations

Publications

  1. 2022
  2. Accepted/In press

    Microstructural characterisation and mechanical properties of Ti-5Al-5V-5Mo-3Cr built by Wire and Arc Additive Manufacture

    Caballero, A., Davis, A., Kennedy, J., Fellowes, J., Garner, A., Williams, S. & Prangnell, P., 8 Aug 2022, (Accepted/In press) In: Philosophical Magazine.

    Research output: Contribution to journalArticlepeer-review

  3. Accepted/In press

    Comparison of Microstructure Refinement in Wire-Arc Additively Manufactured Ti-6Al-2Sn-4Zr-2Mo-0.1Si and Ti-6Al-4V Built with Inter-Pass Deformation

    Davis, A., Caballero, A. E., Biswal, R., Williams, S. & Prangnell, P., 5 Aug 2022, (Accepted/In press) In: Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science.

    Research output: Contribution to journalArticlepeer-review

  4. Published

    Modelling of Friction Stir Welded AA2139 Aluminium Alloy Panels in Tension and Blast

    Awang Draup, A. J., Rodgers, B., Prangnell, P., Li, Q., Lunt, M. J. & Robson, J., 1 May 2022, In: International Journal of Impact Engineering. 163, 104163.

    Research output: Contribution to journalArticlepeer-review

  5. Published

    Large-scale serial sectioning of environmentally assisted cracks in 7xxx Al alloys using femtosecond Laser-PFIB

    Burnett, T., Garner, A., Donoghue, J., Al Aboura, Y., Prangnell, P. & Winiarski, B., 12 Apr 2022, In: Materials Characterization.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    CALPHAD-informed phase-field model for two-sublattice phases based on chemical potentials: η-phase precipitation in Al-Zn-Mg-Cu alloys

    Liu, C., Davis, A., Fellowes, J., Prangnell, P., Raabe, D. & Shanthraj, P., 1 Mar 2022, In: Acta Materialia. 226, 117602.

    Research output: Contribution to journalArticlepeer-review

  7. Published

    β Grain refinement by yttrium addition in Ti-6Al-4V Wire-Arc Additive Manufacturing

    Kennedy, J., Davis, A., Caballero, A. F., Byres, N., Williams, S., Pickering, E. & Prangnell, P., 25 Feb 2022, In: Journal of Alloys and Compounds. 895, p. 162735

    Research output: Contribution to journalArticlepeer-review

  8. Published

    Understanding the environmentally assisted cracking (EAC) initiation and propagation of new generation 7xxx alloys using slow strain rate testing

    Burnett, T., Al Aboura, Y., Euesden, R., Garner, A. & Prangnell, P., 16 Feb 2022, In: Corrosion Science.

    Research output: Contribution to journalArticlepeer-review

  9. 2021
  10. Published

    The evolution of abnormally coarse grain structures in beta-annealed Ti-6Al%-4V% rolled plates, observed by in-situ investigation

    Byres, N., Quinta da Fonseca, J., Daniel, C., Donoghue, J., Davis, A., Shanthraj, P., Dod, B. & Prangnell, P., 1 Dec 2021, In: Acta Materialia. 221, 117362.

    Research output: Contribution to journalArticlepeer-review

  11. Published

    In-Situ Observation of Single Variant α Colony Formation in Ti-6Al-4V

    Davis, A., Donoghue, J., Kennedy, J., Byres, N. & Prangnell, P., 20 Sep 2021, In: Acta Materialia. 117315.

    Research output: Contribution to journalArticlepeer-review

  12. Accepted/In press

    CALPHAD-informed phase-field modeling of grain boundary microchemistry and precipitation in Al-Zn-Mg-Cu alloys

    Liu, C., Garner, A., Zhao, H., Prangnell, P., Gault, B., Raabe, D. & Shanthraj, P., 5 May 2021, (Accepted/In press) In: Acta Materialia.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 3 4 5 6 7 8 ...17 Next

Research Explorer downloads

1329

Research output: Contribution to journalArticlepeer-review

703

Research output: Chapter in Book/Report/Conference proceedingConference contribution

512

Research output: Contribution to journalArticlepeer-review