Prof Neil K. Bourne

Professor of Matter in Extreme Environmt

Full contact details
View graph of relations

Publications

  1. Article › Research › Not peer-reviewed
  2. Published

    Calibration of commercial gauges of varying geometry to measure the lateral component of stress

    Bourne, N. & Rosenberg, Z., 2006, In : AIP Conference Proceedings. 845, 1207

    Research output: Contribution to journalArticle

  3. Article › Research › Peer-reviewed
  4. Published

    A 50 mm bore gas gun for dynamic loading of materials and structures

    Bourne, N., 2003, In : Measurement Science and Technology. 14, 13, p. 273-279 6 p.

    Research output: Contribution to journalArticle

  5. Published

    A gas gun for plane and shear loading of inert and explosive targets

    Stevens, G. & Bourne, N., 2001, In : Review of Scientific Instruments. 72, 0, p. 2214-2218 4 p.

    Research output: Contribution to journalArticle

  6. Published

    Calibration Of The Attenuator Output For The Large Scale Gap Test

    Cooper, G., Bourne, N., Hollands, R., Burley, S. & Fung, V., 2005, In : Propellants Explosives Pyrotechnics. 30, 0, p. 196-198 2 p.

    Research output: Contribution to journalArticle

  7. Published

    Constitutive modeling of fracture waves

    Resnyansky, A., Romensky, I. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 1537-1545 8 p.

    Research output: Contribution to journalArticle

  8. Published

    Constitutive modeling of shock response of polytetrafluoroethylene

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F. & Brown, E. N., 2011, In : Journal of Applied Physics. 110, 3

    Research output: Contribution to journalArticle

  9. Published

    Decay of the elastic precursor in a filled glass

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 5368-5371 3 p.

    Research output: Contribution to journalArticle

  10. Published

    Development of magnetic gauges for the measurement of particle velocities during one-dimensional shock loading

    Millet, J. & Bourne, N., 2003, In : Measurement Science and Technology. 14, 15, p. 601-606 5 p.

    Research output: Contribution to journalArticle

  11. Published

    Dynamic damage in carbon-fibre composites

    Bourne, N., Parry, S., Townsend, D., Withers, P., Soutis, C. & Frias, C., 13 Jul 2016, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 374, 20160018.

    Research output: Contribution to journalArticle

  12. Published

    Effect of internal strain on the propagation of failure in shock loaded soda-lime glass

    Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 4681-4686 5 p.

    Research output: Contribution to journalArticle

  13. Published

    Effects of orientation on the strength of the aluminum alloy 7010-T6 during shock loading: Experiment and simulation

    Millet, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2002, In : Journal of Applied Physics. 92, 0, p. 4342-4348 6 p.

    Research output: Contribution to journalArticle

  14. Published

    Equation of state of polytetrafluoroethylene

    G, G. III. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 8966-8969 3 p.

    Research output: Contribution to journalArticle

  15. Published

    Gas Gun for Dynamic Loading of Explosives

    Bourne, N., 2004, In : Review of Scientific Instruments. 75, 0, p. 38869-38869

    Research output: Contribution to journalArticle

  16. Published

    Influence of anisotropy (crystallographic and microstructural) on spallation in Zr, Ta, HY-100 steel, and 1080 eutectoid steel

    Gray, G. T., Bourne, N. K., Vecchio, K. S. & Millett, J. C. F., May 2010, In : International Journal of Fracture. 163, 1-2, p. 243-258 15 p.

    Research output: Contribution to journalArticle

  17. Published

    Influence of Shock-wave Profile Shape (Triangular -

    Henrie, B., G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 773-778 5 p.

    Research output: Contribution to journalArticle

  18. Published

    Lateral stress and shear strength behind the shock front in three face centered cubic metals

    Millett, J. C. F., Whiteman, G. & Bourne, N. K., 2009, In : Journal of Applied Physics. 105, 3, 033515.

    Research output: Contribution to journalArticle

  19. Published

    Lateral stress and shear strength measurements in polycrystalline potassium chloride, above and below the B1/B2 phase transition during shock loading

    Millet, J., Bourne, N. & Rosenberg, Z., 2002, In : Journal of Applied Physics. 91, 0, p. 4777-4779 2 p.

    Research output: Contribution to journalArticle

  20. Published

    Lateral stress measurements and shear strength in shock loaded tungsten carbide

    Dandekar, D., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 96, 0, p. 3727-3732 5 p.

    Research output: Contribution to journalArticle

  21. Published

    Lateral stress measurements in a shock loaded alumina: Shear strength and delayed failure

    Millet, J. & Bourne, N., 2001, In : Journal of Materials Science. 36, 14, p. 3409-3414 5 p.

    Research output: Contribution to journalArticle

  22. Published

    Materials' physics in extremes: Akrology

    Bourne, N. K., Oct 2011, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42, 10, p. 2975-2984 9 p.

    Research output: Contribution to journalArticle

  23. Published

    Materials science: Atomistic views of deformation

    Bourne, N. K., 2017, In : Nature. 550, 7677, p. 461-463 3 p.

    Research output: Contribution to journalArticle

  24. Published

    Measurement Of The Pressure Pulse From A Detonating Explosive

    Milne, A., Bourne, N. & Biers, R., 2005, In : Journal of Physics D: Applied Physics. 38, 12, p. 1984-1988 4 p.

    Research output: Contribution to journalArticle

  25. Published

    Modeling shock waves in orthotropic elastic materials

    Vignjevic, R., Campbell, J. C., Bourne, N. K. & Djordjevic, N., 2008, In : Journal of Applied Physics. 104, 4, 044904.

    Research output: Contribution to journalArticle

  26. Published

    Modelling of spall in an anisotropic aluminiumalloy

    Campbell, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2004, In : Space Debris. 2, 4, p. 225-232 7 p.

    Research output: Contribution to journalArticle

  27. Published

    On compression and damage evolution in two thermoplastics

    Bourne, N., Garcea, S., Eastwood, D., Parry, S., Rau, C., Withers, P., Mcdonald, S. & Brown, E. N., 2017, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

    Research output: Contribution to journalArticle

  28. Published

    On Conductivity Changes in Shocked Potassium Chloride

    Townsend, D., Braithwaite, M. & Bourne, N., 2005, In : Journal of Applied Physics. 97, 0, p. 123506-12350 111156 p.

    Research output: Contribution to journalArticle

  29. Published

    On designing structures for extreme environments

    Bourne, N. K., Oct 2012, In : International Journal of Impact Engineering. 48, p. 107-115 8 p.

    Research output: Contribution to journalArticle

  30. Published

    On Impacting Liquid Jets and Drops Onto PolyMethylMethacrylate Targets

    Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 461, 2056, p. 1129-1145 16 p.

    Research output: Contribution to journalArticle

  31. Published

    On kinetics of failure in, and resistance to penetration of metals and ceramics

    Bourne, N. K., 1 Nov 2010, In : Advances in Applied Ceramics. 109, 8, p. 480-486 6 p.

    Research output: Contribution to journalArticle

  32. Published

    On Shock-Induced Yield In Brittle Materials

    Bourne, N., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  33. Published

    On strength at yield in condensed matter

    Bourne, N. K., 2015, In : Metallurgical and Materials Transactions A. 46, 10, p. 4491-4497 7 p.

    Research output: Contribution to journalArticle

  34. Published

    On Strengthening during Quasi-Isentropic Loading

    Millet, J. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  35. Published

    On Stress Wave Interactions in Liquid Impact

    Bourne, N., 2005, In : Wear. 258, 0, p. 588-595 7 p.

    Research output: Contribution to journalArticle

  36. Published

    On the behaviour of body-centred cubic metals to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Park, N. T., Whiteman, G. & Gray, G. T., Jun 2011, In : Journal of Materials Science. 46, 11, p. 3899-3906 7 p.

    Research output: Contribution to journalArticle

  37. Published

    On the behaviour of the magnesium alloy, AZ61 to one-dimensional shock loading

    Millett, J. C. F., Stirk, S. M., Bourne, N. K. & Gray, G. T., Oct 2010, In : Acta Materialia. 58, 17, p. 5675-5682 7 p.

    Research output: Contribution to journalArticle

  38. Published

    On the collapse of cavities

    Bourne, N., 2002, In : Shock Waves. 11, 6, p. 447-455 8 p.

    Research output: Contribution to journalArticle

  39. Published

    On the Dynamic Response of Four Polymers

    G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 815-820 5 p.

    Research output: Contribution to journalArticle

  40. Published

    On the Failure and Dynamic Performance of Materials

    Bourne, N. K., Feb 2012, In : Experimental Mechanics. 52, 2, p. 153-159 6 p.

    Research output: Contribution to journalArticle

  41. Published

    On the failure of shocked titanium diboride

    G, G. III. & Bourne, N., 2002, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 458, 2022, p. 1273-1284 11 p.

    Research output: Contribution to journalArticle

  42. Published

    On the High-Rate Response of Teflon, Estane and Kel-F-800

    G, G. III. & Bourne, N., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  43. Published

    On the Hugoniot elastic limit in polycrystalline alumina

    Bourne, N. K., Millett, J. C. F., Chen, M., McCauley, J. W. & Dandekar, D. P., 2007, In : Journal of Applied Physics. 102, 7, 073514.

    Research output: Contribution to journalArticle

  44. Published

    On The Impact and Penetration Of Soda Lime Glass

    Bourne, N., 2005, In : International Journal of Impact Engineering. 32, 0, p. 65-79 14 p.

    Research output: Contribution to journalArticle

  45. Published

    On the influence of chain morphology on the shock response of three thermoplastics

    Bourne, N. K. & Millett, J. C. F., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 266-271 5 p.

    Research output: Contribution to journalArticle

  46. Published

    On the laser ignition and initiation of explosives

    Bourne, N., 2001, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 457, 2010, p. 1401-1426 25 p.

    Research output: Contribution to journalArticle

  47. Published

    On the one-dimensional recovery and microstructural evaluation of shocked alumina

    Dandekar, D., Bourne, N. & Green, W., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  48. Published

    On the Recovery of One-dimensionally Shocked Materials

    G, G. III. & Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 0

    Research output: Contribution to journalArticle

  49. Published

    On the response to shock of foil stress sensors in ceramics

    Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1201-1207 6 p.

    Research output: Contribution to journalArticle

  50. Published

    On the shock compression of polycrystalline metals

    Bourne, N. K., Millett, J. C. F. & Gray, G. T., 2009, In : Journal of Materials Science. 44, 13, p. 3319-3343 24 p.

    Research output: Contribution to journalArticle

  51. Published

    On the shock response of cubic metals

    Bourne, N. K., Gray, G. T. & Millett, J. C. F., 2009, In : Journal of Applied Physics. 106, 9, 091301.

    Research output: Contribution to journalArticle

  52. Published

    On the shock response of piezoresistive gauges

    Bourne, N., 2004, In : Measurement Science and Technology. 15, 2, p. 425-431 6 p.

    Research output: Contribution to journalArticle

  53. Published

    On the Shock Response of Polymers to Extreme Loading

    Bourne, N., 1 Feb 2016, In : Journal of Dynamic Behavior of Materials. 2, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticle

  54. Published

    On the strength of g-titanium aluminides during shock loading

    G, G. III., Jones, I., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 929-934 5 p.

    Research output: Contribution to journalArticle

  55. Published

    On the Ultimate Strength of Condensed Matter

    Bourne, N. K., 2014, In : Metallurgical and Materials Transactions A. 46, 10, p. 1-8 8 p.

    Research output: Contribution to journalArticle

  56. Published

    Orientation dependence of shock induced dislocations in tantalum single crystals

    Pang, B., Jones, I., Chiu, Y., Millett, J., Whiteman, G. & Bourne, N., 2014, In : Journal of Physics: Conference Series. 522, 1

    Research output: Contribution to journalArticle

  57. Published

    Phase transition modeling of polytetrafluoroethylene during Taylor impact

    Resnyansky, A. D., Bourne, N. K., Brown, E. N., Millett, J. C. F., Rae, P. J., McDonald, S. A. & Withers, P. J., 2014, In : Journal of Applied Physics. 116, 22

    Research output: Contribution to journalArticle

  58. Published

    Plastic Deformation and Fracture of Brittle Ceramic under Shock Loading

    McCauley, J., Chen, M. & Bourne, N., 2005, In : Nature Materials. 0

    Research output: Contribution to journalArticle

  59. Published

    Plate Impact Response of Tantalum: Lateral Stress and Shear Strength Through The Front

    G, G. III., Millet, J. & Bourne, N., 2003, In : Journal of Applied Physics. 94, 0, p. 6430-6436 6 p.

    Research output: Contribution to journalArticle

  60. Published

    Production of a high-velocity water slug using an impacting technique

    Dehkhoda, S. & Bourne, N. K., 2014, In : Review of Scientific Instruments. 85, 2

    Research output: Contribution to journalArticle

  61. Published

    Response and representation of ductile damage under varying shock loading conditions in tantalum

    Bronkhorst, C. A., Gray, G. T., Addessio, F. L., Livescu, V., Bourne, N. K., MacDonald, S. A. & Withers, P. J., 28 Feb 2016, In : Journal of Applied Physics. 119, 8, 085103.

    Research output: Contribution to journalArticle

  62. Published

    Shear strength developments during shock loading in tantalum alloys: Effects of cold work and alloying

    Millett, J. C. F., Whiteman, G., Bourne, N. K., Case, S. & Gray, G. T., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  63. Published

    Shear strength measurements in a shock loaded commercial silastomer

    Millett, J. C. F., Whiteman, G., Stirk, S. M. & Bourne, N. K., 11 May 2011, In : Journal of Physics D: Applied Physics. 44, 18, 185403.

    Research output: Contribution to journalArticle

  64. Published

    Shear strength measurements in the TiAl-based alloy Ti-48Al-2Nb-2Cr-1B during shock loading

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1188-1191 3 p.

    Research output: Contribution to journalArticle

  65. Published

    Shock and awe

    Bourne, N. K., 2009, In : Physics World. 22, 1, p. 26-29 4 p.

    Research output: Contribution to journalArticle

  66. Published

    Shock Induced Mechanical Response of a g - TiAl Alloy

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2566-2570 4 p.

    Research output: Contribution to journalArticle

  67. Published

    Shock Response of the Elastomer Polychloroprene

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2576-2579 3 p.

    Research output: Contribution to journalArticle

  68. Published

    Shock to Detonation Transition in a Plastic Bonded Explosive

    Milne, A. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 2379-2385 6 p.

    Research output: Contribution to journalArticle

  69. Published

    Shock Wave Compression of a Porous Material

    Resnyansky, A. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 1760-1769 9 p.

    Research output: Contribution to journalArticle

  70. Published

    Shock, release and Taylor impact of the semicrystalline thermoplastic polytetrafluoroethylene

    Bourne, N. K., Brown, E. N., Millett, J. C. F. & Gray, G. T., 2008, In : Journal of Applied Physics. 103, 7, 074902.

    Research output: Contribution to journalArticle

  71. Published

    Shock-induced Brittle Failure of Boron Carbide

    Bourne, N., 2002, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 458, 2024, p. 1999-2006 7 p.

    Research output: Contribution to journalArticle

  72. Published

    Soft Recovery of Polymers and Composites

    G, G. III. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  73. Published

    Tacticity in shocked polymer hydrocarbons

    Bourne, N. K. & Millett, J. C. F., Jan 2008, In : Journal of Materials Science. 43, 1, p. 185-189 4 p.

    Research output: Contribution to journalArticle

  74. Published

    Taylor impact of polyether ether ketone

    Stevens, G., Millet, J. & Bourne, N., 2005, In : International Journal of Impact Engineering. 26, 7, p. 1086-1094 8 p.

    Research output: Contribution to journalArticle

  75. Published

    The behavior of an epoxy resin under one-dimensional shock loading

    Millet, J., Barnes, N. & Bourne, N., 2002, In : Journal of Applied Physics. 21, 0, p. 6590-6594 4 p.

    Research output: Contribution to journalArticle

  76. Published

    The behavior of Ni, Ni-60Co, and Ni3Al during one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K. & Gray, G. T., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 322-334 12 p.

    Research output: Contribution to journalArticle

  77. Published

    The behaviour of niobium and molybdenum during uni-axial strain loading

    Millett, J. C. F., Cotton, M., Bourne, N. K., Park, N. T. & Whiteman, G., 2014, In : Journal of Applied Physics. 115, 7

    Research output: Contribution to journalArticle

  78. Published

    The behaviour of the shape memory alloy NiTi during one-dimensional shock loading

    G, G. III., Millet, J. & Bourne, N., 2002, In : Journal of Applied Physics. 92, 0, p. 3107-3110 3 p.

    Research output: Contribution to journalArticle

  79. Published

    The Collapse of Asymmetric Voids under Shock Loading

    Milne, A. & Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 0

    Research output: Contribution to journalArticle

  80. Published

    The Effect Of Cobalt Additions On The Shock Response Of Nickel Alloys

    Millet, J., Bourne, N. & Meziere, Y., 2005, In : International Journal of Industrial Engineering - Applications and Practice. 0

    Research output: Contribution to journalArticle

  81. Published

    The effect of heat treatment on the shock induced mechanical properties of the aluminium alloy, 7017

    Millet, J., Edwards, M. & Bourne, N., 2004, In : Scripta Materialia. 51, 0, p. 967-971 4 p.

    Research output: Contribution to journalArticle

  82. Published

    The effect of loading rate in the response of Ti-6Al-4V to one-dimensional shock loading

    Jones, I., Millet, J., Chu, M. & Bourne, N., 2005, In : Scripta Materialia. 0

    Research output: Contribution to journalArticle

  83. Published

    The effect of orientation on the shock response of a carbon fibre-epoxy composite

    Millett, J. C. F., Bourne, N. K., Meziere, Y. J. E., Vignjevic, R. & Lukyanov, A., Dec 2007, In : Composites Science and Technology. 67, 15-16, p. 3253-3260 7 p.

    Research output: Contribution to journalArticle

  84. Published

    The Effects of Changing Chemistry on the Shock Response of Basic Polymers

    Millett, J. C. F., Brown, E. N., Gray III, G. T., Bourne, N., Wood, D. C. & Appleby-Thomas, G., 2016, In : Journal of Dynamic Behavior of Materials.

    Research output: Contribution to journalArticle

  85. Published

    The Effects Of Shock Upon Insensitive Munitions

    Milne, A. & Bourne, N., 2005, In : Propellants Explosives Pyrotechnics. 0

    Research output: Contribution to journalArticle

  86. Published

    The equation of state of a fluorinated tripolymer

    G, G. III., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 96, 0, p. 5500-5504 4 p.

    Research output: Contribution to journalArticle

  87. Published

    The equation of state of two alumina-filled epoxy resins

    Deas, D., Millet, J. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 38, 6, p. 930-934 4 p.

    Research output: Contribution to journalArticle

  88. Published

    The high-rate response of an elastomer

    Millet, J. & Bourne, N., 2003, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 459, 2031, p. 567-576 9 p.

    Research output: Contribution to journalArticle

  89. Published

    The influence of shock-loading path on the spallation response of Ta

    Gray, G. T., Bourne, N. K., Livescu, V., Trujillo, C. P., MacDonald, S. & Withers, P., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  90. Published

    The limits of strength in materials in the condensed phase

    Bourne, N. K., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  91. Published

    The onset of damage in shocked alumina

    Bourne, N., 2001, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 457, 2013, p. 2189-2205 16 p.

    Research output: Contribution to journalArticle

  92. Published

    The relation of failure under 1D shock to the ballistic performance of brittle materials

    Bourne, N. K., Aug 2008, In : International Journal of Impact Engineering. 35, 8, p. 674-683 9 p.

    Research output: Contribution to journalArticle

  93. Published

    The response of hydroxy-terminated polybutadiene to one-dimensional shock loading

    Akhavan, J., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 4722-4727 5 p.

    Research output: Contribution to journalArticle

  94. Published

    The response of polyether ether ketone to one dimensional shock loading

    G, G. III., Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 6, p. 942-947 5 p.

    Research output: Contribution to journalArticle

  95. Published

    The response of soda-lime glass-hydroxyterminated polybutadiene composites to shock loading

    Milne, A., Akhavan, J., Millet, J. & Bourne, N., 2005, In : Journal of Applied Physics. 97, 0, p. 43524-43524

    Research output: Contribution to journalArticle

  96. Published

    The response of TiAl based alloys to one-dimensional shock loading

    G, G. III., Jones, I., Millet, J. & Bourne, N., 2002, In : Acta Materialia. 50, 19, p. 4801-4811 10 p.

    Research output: Contribution to journalArticle

  97. Published

    The role of aging on the mechanical and microstructural response of aluminum 6061 to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Chu, M. Q., Jones, I. P., Gray, G. T. & Appleby-Thomas, G., 1 Oct 2010, In : Journal of Applied Physics. 108, 7, 073502.

    Research output: Contribution to journalArticle

  98. Published

    The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading

    Millett, J. C. F., Whiteman, G., Bourne, N. K. & Gray, G. T., 2008, In : Journal of Applied Physics. 104, 7, 073531.

    Research output: Contribution to journalArticle

  99. Published

    The role of cold work on the shock response of tantalum

    Millett, J. C. F., Whiteman, G., Park, N. T., Case, S. & Bourne, N. K., 2013, In : Journal of Applied Physics. 113, 23, 233502.

    Research output: Contribution to journalArticle

  100. Published

    The shock Hugoniot of a plastic-bonded explosive and inert simulants

    Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 18, p. 2613-2617 4 p.

    Research output: Contribution to journalArticle

  101. Published

    The shock induced equation of state of three simple polymers

    Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 20, p. 2901-2907 6 p.

    Research output: Contribution to journalArticle

  102. Published

    The shock properties of a La2O3 filled silicate glass

    Millet, J. & Bourne, N., 2005, In : Journal of Materials Science. 40, 14, p. 3651-3657 6 p.

    Research output: Contribution to journalArticle

Previous 1 2 3 Next

Research Explorer downloads

105

Research output: Contribution to journalArticle

77

Research output: Chapter in Book/Report/Conference proceedingConference contribution

73

Research output: Chapter in Book/Report/Conference proceedingConference contribution

56

Research output: Chapter in Book/Report/Conference proceedingConference contribution

50

Research output: Chapter in Book/Report/Conference proceedingConference contribution