Prof Neil K. Bourne

Professor of Matter in Extreme Environmt

Full contact details
View graph of relations

Publications

  1. Published

    On the Soft-Recovery of One-Dimensionally Shocked Polymers

    Gray III, G. & Bourne, N., 2005, On the Soft-Recovery of One-Dimensionally Shocked Polymers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  2. Published

    On the Strength Behaviour of Kel-F-800 and Estane Polymers

    Gray III, G., Bourne, N. & Mort, P., 2002, On the Strength Behaviour of Kel-F-800 and Estane Polymers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Published

    On the strength of g-titanium aluminides during shock loading

    G, G. III., Jones, I., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 929-934 5 p.

    Research output: Contribution to journalArticle

  4. Published

    On the Ultimate Strength of Condensed Matter

    Bourne, N. K., 2014, In : Metallurgical and Materials Transactions A. 46, 10, p. 1-8 8 p.

    Research output: Contribution to journalArticle

  5. Published

    One-Dimensional Shock and Detonation Characterization of Ultrafine Hexanitrostilbene

    Knapp, I., Millett, J. C., Bourne, N. & Goveas, S. G., 2006, Shock compression of condensed matter 2005: Proceedings of the Conference of the American Physical Society topical group on shock compression of condensed matter . 1065 ed. Melville: American Institute of Physics, Vol. 845.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Published

    Orientation dependence of shock induced dislocations in tantalum single crystals

    Pang, B., Jones, I., Chiu, Y., Millett, J., Whiteman, G. & Bourne, N., 2014, In : Journal of Physics: Conference Series. 522, 1

    Research output: Contribution to journalArticle

  7. Published

    Phase transition modeling of polytetrafluoroethylene during Taylor impact

    Resnyansky, A. D., Bourne, N. K., Brown, E. N., Millett, J. C. F., Rae, P. J., McDonald, S. A. & Withers, P. J., 2014, In : Journal of Applied Physics. 116, 22

    Research output: Contribution to journalArticle

  8. Published

    Plastic Deformation and Fracture of Brittle Ceramic under Shock Loading

    McCauley, J., Chen, M. & Bourne, N., 2005, In : Nature Materials. 0

    Research output: Contribution to journalArticle

  9. Published

    Plate Impact Response of Tantalum: Lateral Stress and Shear Strength Through The Front

    G, G. III., Millet, J. & Bourne, N., 2003, In : Journal of Applied Physics. 94, 0, p. 6430-6436 6 p.

    Research output: Contribution to journalArticle

  10. Published

    Plate Impact Study of the Shock to Detonation Transition in a PBX

    Longbottom, A. W., Cooper, G., Murray, I., Milne, N. K., Bourne, N. & Hollands, R., 2003, Plate Impact Study of the Shock to Detonation Transition in a PBX.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Production of a high-velocity water slug using an impacting technique

    Dehkhoda, S. & Bourne, N. K., 2014, In : Review of Scientific Instruments. 85, 2

    Research output: Contribution to journalArticle

  12. Published

    Propagation of Waves through a Float Glass Laminate

    Bourne, N. & Rosenberg, Z., Jul 2003, Propagation of Waves through a Float Glass Laminate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Published

    Quasi-Static and Shock Induced Mechanical Response of an Aluminium-Zinc-Magnesium Alloy as a Function of Heat Treatment

    Edwards, M. & Bourne, N., 2004, Quasi-Static and Shock Induced Mechanical Response of an Aluminium-Zinc-Magnesium Alloy as a Function of Heat Treatment.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Published

    Response and representation of ductile damage under varying shock loading conditions in tantalum

    Bronkhorst, C. A., Gray, G. T., Addessio, F. L., Livescu, V., Bourne, N. K., MacDonald, S. A. & Withers, P. J., 28 Feb 2016, In : Journal of Applied Physics. 119, 8, 085103.

    Research output: Contribution to journalArticle

  15. Published

    Shear strength developments during shock loading in tantalum alloys: Effects of cold work and alloying

    Millett, J. C. F., Whiteman, G., Bourne, N. K., Case, S. & Gray, G. T., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  16. Published

    Shear Strength Measurements in a Shock Loaded Alumina-Filled Epoxy Resin

    Deas, D., Kos, K. & Bourne, N., 2005, Shear Strength Measurements in a Shock Loaded Alumina-Filled Epoxy Resin.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Published

    Shear strength measurements in a shock loaded commercial silastomer

    Millett, J. C. F., Whiteman, G., Stirk, S. M. & Bourne, N. K., 11 May 2011, In : Journal of Physics D: Applied Physics. 44, 18, 185403.

    Research output: Contribution to journalArticle

  18. Published

    Shear strength measurements in the TiAl-based alloy Ti-48Al-2Nb-2Cr-1B during shock loading

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1188-1191 3 p.

    Research output: Contribution to journalArticle

  19. Published

    Shock and awe

    Bourne, N. K., 2009, In : Physics World. 22, 1, p. 26-29 4 p.

    Research output: Contribution to journalArticle

  20. Published

    Shock compression of Dry and Hydrated Sand

    Resnyansky, A. & Bourne, N., 2004, Shock compression of Dry and Hydrated Sand.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Shock Induced Mechanical Response of a g - TiAl Alloy

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2566-2570 4 p.

    Research output: Contribution to journalArticle

  22. Published

    Shock response of body centered cubic metals

    Millett, J. C. F., Cotton, M., Whiteman, G., Bourne, N. K., Park, N. T. & Gray, G. T., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1077-1080 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  23. Published

    Shock Response of the Elastomer Polychloroprene

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2576-2579 3 p.

    Research output: Contribution to journalArticle

  24. Published

    Shock to Detonation Transition in a Plastic Bonded Explosive

    Milne, A. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 2379-2385 6 p.

    Research output: Contribution to journalArticle

  25. Published

    Shock Wave Compression of a Porous Material

    Resnyansky, A. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 1760-1769 9 p.

    Research output: Contribution to journalArticle

  26. Published

    Shock, release and Taylor impact of the semicrystalline thermoplastic polytetrafluoroethylene

    Bourne, N. K., Brown, E. N., Millett, J. C. F. & Gray, G. T., 2008, In : Journal of Applied Physics. 103, 7, 074902.

    Research output: Contribution to journalArticle

  27. Published

    Shock-induced Brittle Failure of Boron Carbide

    Bourne, N., 2002, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 458, 2024, p. 1999-2006 7 p.

    Research output: Contribution to journalArticle

  28. Published

    Simulation of Void Collapse in Ammonium Nitrate Using a Meshfree Lagrangian Particle Method

    Libersky, L. D., Bourne, N., Randles, P. W. & Vignjevic, R., 2004, Simulation of Void Collapse in Ammonium Nitrate Using a Meshfree Lagrangian Particle Method.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Published

    Soft Recovery of Polymers and Composites

    G, G. III. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  30. Published

    Spall experiments on stainless steel 21-6-9 varying pulse lengths and longitudinal stress

    Whiteman, G., Bourne, N. K. & Millett, J. C. F., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 1069-1072 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  31. Published

    Spallation in the Alloy Ti-6Al-4V

    Bourne, N., Church, P. D. & Andrews, T., Jun 2002, AIP Conference Proceedings;2002. 1 ed. Vol. 620.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  32. Published

    Spallation in Ti-6Al-4V: Stress Measurements and Recovery

    Jones, I. & Bourne, N., 2005, Spallation in Ti-6Al-4V: Stress Measurements and Recovery.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    Spallation response of Ti-6Al-4V: Rear surface velocimetry and X-ray tomography

    McDonald, S. A., Cotton, M., Bourne, N. K., Millett, J. C. F. & Withers, P. J., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1065-1068 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  34. Published

    Tacticity in shocked polymer hydrocarbons

    Bourne, N. K. & Millett, J. C. F., Jan 2008, In : Journal of Materials Science. 43, 1, p. 185-189 4 p.

    Research output: Contribution to journalArticle

  35. Published

    Taylor impact of polyether ether ketone

    Stevens, G., Millet, J. & Bourne, N., 2005, In : International Journal of Impact Engineering. 26, 7, p. 1086-1094 8 p.

    Research output: Contribution to journalArticle

  36. Published

    The behavior of an epoxy resin under one-dimensional shock loading

    Millet, J., Barnes, N. & Bourne, N., 2002, In : Journal of Applied Physics. 21, 0, p. 6590-6594 4 p.

    Research output: Contribution to journalArticle

  37. Published

    The behavior of Ni, Ni-60Co, and Ni3Al during one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K. & Gray, G. T., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 322-334 12 p.

    Research output: Contribution to journalArticle

  38. Published

    The Behaviour of a Carbon-Fibre Epoxy Composite Under Shock Loading

    Lukyanov, A., Bourne, N. & Vignjevic, R., 2005, The Behaviour of a Carbon-Fibre Epoxy Composite Under Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Published

    The Behaviour of a Glass-Fibre Epoxy Composite During Plate Impact

    Eatwell, M., Bourne, N. & Meziere, Y., 2005, The Behaviour of a Glass-Fibre Epoxy Composite During Plate Impact.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  40. Published

    The behaviour of niobium and molybdenum during uni-axial strain loading

    Millett, J. C. F., Cotton, M., Bourne, N. K., Park, N. T. & Whiteman, G., 2014, In : Journal of Applied Physics. 115, 7

    Research output: Contribution to journalArticle

  41. Published

    The behaviour of the shape memory alloy NiTi during one-dimensional shock loading

    G, G. III., Millet, J. & Bourne, N., 2002, In : Journal of Applied Physics. 92, 0, p. 3107-3110 3 p.

    Research output: Contribution to journalArticle

  42. Published

    The Collapse of Asymmetric Voids under Shock Loading

    Milne, A. & Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 0

    Research output: Contribution to journalArticle

  43. Published

    The Deviatoric Response of an Epoxy Resin to One-Dimensional Shock Loading

    Belcher, I., Barnes, N. & Bourne, N., 2001, The Deviatoric Response of an Epoxy Resin to One-Dimensional Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Published

    The Effect Of Cobalt Additions On The Shock Response Of Nickel Alloys

    Millet, J., Bourne, N. & Meziere, Y., 2005, In : International Journal of Industrial Engineering - Applications and Practice. 0

    Research output: Contribution to journalArticle

  45. Published

    The effect of heat treatment on the shock induced mechanical properties of the aluminium alloy, 7017

    Millet, J., Edwards, M. & Bourne, N., 2004, In : Scripta Materialia. 51, 0, p. 967-971 4 p.

    Research output: Contribution to journalArticle

  46. Published

    The effect of heat treatment on the shock response of the aluminium alloy, 6061

    Chu, M. Q., Jones, I. P., Millett, J. C. F., Bourne, N. K. & Gray, G. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 953-956 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  47. Published

    The effect of loading rate in the response of Ti-6Al-4V to one-dimensional shock loading

    Jones, I., Millet, J., Chu, M. & Bourne, N., 2005, In : Scripta Materialia. 0

    Research output: Contribution to journalArticle

  48. Published

    The Effect of Microstructure on the Shock Behaviour of g-Titanium Aluminides

    G, G. III., Jones, I. & Bourne, N., 2001, Georgia Bulletin of the American Physical Society. 4 ed. Vol. 46.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Published

    The effect of orientation on the shock response of a carbon fibre-epoxy composite

    Millett, J. C. F., Bourne, N. K., Meziere, Y. J. E., Vignjevic, R. & Lukyanov, A., Dec 2007, In : Composites Science and Technology. 67, 15-16, p. 3253-3260 7 p.

    Research output: Contribution to journalArticle

  50. Published

    The Effect of Orientation on the Spall Strength of the Aluminum Alloy 7010-T6

    Edwards, M. & Bourne, N., 2002, AIP Conference Proceedings. Vol. 620. p. 523-526 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

Research Explorer downloads

123

Research output: Contribution to journalArticle

84

Research output: Chapter in Book/Report/Conference proceedingConference contribution

82

Research output: Chapter in Book/Report/Conference proceedingConference contribution

60

Research output: Chapter in Book/Report/Conference proceedingConference contribution

57

Research output: Chapter in Book/Report/Conference proceedingConference contribution