Prof Neil K. Bourne

Professor of Matter in Extreme Environmt

Full contact details
View graph of relations

Publications

  1. Published

    A 50 mm bore gas gun for dynamic loading of materials and structures

    Bourne, N., 2003, In : Measurement Science and Technology. 14, 13, p. 273-279 6 p.

    Research output: Contribution to journalArticle

  2. Published

    A gas gun for plane and shear loading of inert and explosive targets

    Stevens, G. & Bourne, N., 2001, In : Review of Scientific Instruments. 72, 0, p. 2214-2218 4 p.

    Research output: Contribution to journalArticle

  3. Published

    Akrology: Materials' physics in extremes

    Bourne, N. K., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1331-1334 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  4. Published

    Ballistic Impact Of A Hard Projectile Against A Block Of Glass

    Resnyansky, A. & Bourne, N., 2004, 21st International Sympoisum On Ballistics.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Calibration of commercial gauges of varying geometry to measure the lateral component of stress

    Bourne, N. & Rosenberg, Z., 2006, In : AIP Conference Proceedings. 845, 1207

    Research output: Contribution to journalArticle

  6. Published

    Calibration Of The Attenuator Output For The Large Scale Gap Test

    Cooper, G., Bourne, N., Hollands, R., Burley, S. & Fung, V., 2005, In : Propellants Explosives Pyrotechnics. 30, 0, p. 196-198 2 p.

    Research output: Contribution to journalArticle

  7. Published

    Constitutive modeling of fracture waves

    Resnyansky, A., Romensky, I. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 1537-1545 8 p.

    Research output: Contribution to journalArticle

  8. Published

    Constitutive modeling of shock response of polytetrafluoroethylene

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F. & Brown, E. N., 2011, In : Journal of Applied Physics. 110, 3

    Research output: Contribution to journalArticle

  9. Published

    Constitutive Modelling of Shock Response of PTFE

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F., Brown, E. N., Elert, M. L. (ed.), Buttler, W. T. (ed.), Furnish, M. D. (ed.), Anderson, W. W. (ed.) & Proud, W. G. (ed.), 2009, Shock Compression of Condensed Matter - 2009, Pts 1 and 2. Vol. 1195. p. 1183-1186 4 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  10. Published

    Contrasting the Effects of Cold Rolling on the Shock Response of Typical Face Centred Cubic and Body Centred Cubic Metals

    Millett, J. C. F., Higgins, D., Whiteman, G., Pang, B., Chiu, Y-L., Jones, I. & Bourne, N., 2018, AIP Shock Compression of Condensed Matter 2017 . 060004

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Critical conditions for failure; stress levels, length scales, time scales

    Bourne, N., Gray III, C. T. & Bronkhorst, C. A., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published

    Crystallographic texture effects on mixed-mode strain localization for lower symmetry metals

    G, T. G. III., Bingert, J. F., Bourne, N. & Maudlin, P. J., 2003, Crystallographic texture effects on mixed-mode strain localization for lower symmetry metals.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Published

    Damage development in rod-on-rod impact test on 1100 pure aluminum

    Iannitti, G., Bonora, N., Bourne, N., Ruggiero, A. & Testa, G., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Published

    Decay of the elastic precursor in a filled glass

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 5368-5371 3 p.

    Research output: Contribution to journalArticle

  15. Published

    Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates

    Loretto, M. H., Zakaria, M., Bourne, N. & Wu, X., 2003, Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Published

    Development of magnetic gauges for the measurement of particle velocities during one-dimensional shock loading

    Millet, J. & Bourne, N., 2003, In : Measurement Science and Technology. 14, 15, p. 601-606 5 p.

    Research output: Contribution to journalArticle

  17. Published

    Deviatoric response of an armour-grade aluminium alloy

    Appleby-Thomas, G. J., Hazell, P. J., Millett, J. & Bourne, N. K., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 533-536 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  18. Published

    Dynamic damage in carbon-fibre composites

    Bourne, N., Parry, S., Townsend, D., Withers, P., Soutis, C. & Frias, C., 13 Jul 2016, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 374, 20160018.

    Research output: Contribution to journalArticle

  19. Published

    Dynamic Loading of a Designer Composite

    Vecchio, K. S. & Bourne, N., 2003, Dynamic Loading of a Designer Composite.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Published

    Dynamic Properties of Nickel-Titanium Alloys

    Hauer, A., Paisley, D. L., Swift, D., Thoma, D., G, G. III., Cooley, J., Bourne, N. & Hackenberg, R., 2004, AIP Conf. Proc. Vol. 706. p. 561-564

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

Previous 1 2 3 4 5 6 7 8 ...11 Next

Research Explorer downloads

123

Research output: Contribution to journalArticle

85

Research output: Chapter in Book/Report/Conference proceedingConference contribution

82

Research output: Chapter in Book/Report/Conference proceedingConference contribution

60

Research output: Chapter in Book/Report/Conference proceedingConference contribution

58

Research output: Chapter in Book/Report/Conference proceedingConference contribution