Prof Neil K. Bourne

Professor of Matter in Extreme Environmt

Full contact details
View graph of relations

Publications

  1. Published

    A 50 mm bore gas gun for dynamic loading of materials and structures

    Bourne, N., 2003, In : Measurement Science and Technology. 14, 13, p. 273-279 6 p.

    Research output: Contribution to journalArticle

  2. Published

    A gas gun for plane and shear loading of inert and explosive targets

    Stevens, G. & Bourne, N., 2001, In : Review of Scientific Instruments. 72, 0, p. 2214-2218 4 p.

    Research output: Contribution to journalArticle

  3. Published

    Akrology: Materials' physics in extremes

    Bourne, N. K., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1331-1334 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  4. Published

    Ballistic Impact Of A Hard Projectile Against A Block Of Glass

    Resnyansky, A. & Bourne, N., 2004, 21st International Sympoisum On Ballistics.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Calibration of commercial gauges of varying geometry to measure the lateral component of stress

    Bourne, N. & Rosenberg, Z., 2006, In : AIP Conference Proceedings. 845, 1207

    Research output: Contribution to journalArticle

  6. Published

    Calibration Of The Attenuator Output For The Large Scale Gap Test

    Cooper, G., Bourne, N., Hollands, R., Burley, S. & Fung, V., 2005, In : Propellants Explosives Pyrotechnics. 30, 0, p. 196-198 2 p.

    Research output: Contribution to journalArticle

  7. Published

    Constitutive modeling of fracture waves

    Resnyansky, A., Romensky, I. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 1537-1545 8 p.

    Research output: Contribution to journalArticle

  8. Published

    Constitutive modeling of shock response of polytetrafluoroethylene

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F. & Brown, E. N., 2011, In : Journal of Applied Physics. 110, 3

    Research output: Contribution to journalArticle

  9. Published

    Constitutive Modelling of Shock Response of PTFE

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F., Brown, E. N., Elert, M. L. (ed.), Buttler, W. T. (ed.), Furnish, M. D. (ed.), Anderson, W. W. (ed.) & Proud, W. G. (ed.), 2009, Shock Compression of Condensed Matter - 2009, Pts 1 and 2. Vol. 1195. p. 1183-1186 4 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  10. Published

    Contrasting the Effects of Cold Rolling on the Shock Response of Typical Face Centred Cubic and Body Centred Cubic Metals

    Millett, J. C. F., Higgins, D., Whiteman, G., Pang, B., Chiu, Y-L., Jones, I. & Bourne, N., 2018, AIP Shock Compression of Condensed Matter 2017 . 060004

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  11. Published

    Critical conditions for failure; stress levels, length scales, time scales

    Bourne, N., Gray III, C. T. & Bronkhorst, C. A., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published

    Crystallographic texture effects on mixed-mode strain localization for lower symmetry metals

    G, T. G. III., Bingert, J. F., Bourne, N. & Maudlin, P. J., 2003, Crystallographic texture effects on mixed-mode strain localization for lower symmetry metals.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Published

    Damage development in rod-on-rod impact test on 1100 pure aluminum

    Iannitti, G., Bonora, N., Bourne, N., Ruggiero, A. & Testa, G., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Published

    Decay of the elastic precursor in a filled glass

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 5368-5371 3 p.

    Research output: Contribution to journalArticle

  15. Published

    Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates

    Loretto, M. H., Zakaria, M., Bourne, N. & Wu, X., 2003, Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Published

    Development of magnetic gauges for the measurement of particle velocities during one-dimensional shock loading

    Millet, J. & Bourne, N., 2003, In : Measurement Science and Technology. 14, 15, p. 601-606 5 p.

    Research output: Contribution to journalArticle

  17. Published

    Deviatoric response of an armour-grade aluminium alloy

    Appleby-Thomas, G. J., Hazell, P. J., Millett, J. & Bourne, N. K., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 533-536 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  18. Published

    Dynamic damage in carbon-fibre composites

    Bourne, N., Parry, S., Townsend, D., Withers, P., Soutis, C. & Frias, C., 13 Jul 2016, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 374, 20160018.

    Research output: Contribution to journalArticle

  19. Published

    Dynamic Loading of a Designer Composite

    Vecchio, K. S. & Bourne, N., 2003, Dynamic Loading of a Designer Composite.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. Published

    Dynamic Properties of Nickel-Titanium Alloys

    Hauer, A., Paisley, D. L., Swift, D., Thoma, D., G, G. III., Cooley, J., Bourne, N. & Hackenberg, R., 2004, AIP Conf. Proc. Vol. 706. p. 561-564

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Dynamic shear strength measurements in shock-loaded molybdenum

    Stirk, S. M., Millett, J. C. F., Bourne, N. K., Whiteman, G. & Park, N. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 1123-1126 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  22. Published

    Effect of internal strain on the propagation of failure in shock loaded soda-lime glass

    Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 4681-4686 5 p.

    Research output: Contribution to journalArticle

  23. Published

    Effects of orientation on the strength of the aluminum alloy 7010-T6 during shock loading: Experiment and simulation

    Millet, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2002, In : Journal of Applied Physics. 92, 0, p. 4342-4348 6 p.

    Research output: Contribution to journalArticle

  24. Published

    Equation of State and Shear Strength of Nickel And Ni-60Co Under One-Dimensional Shock Loading

    Wallwork, A., Workman, A., Bourne, N. & Meziere, Y., 2005, 14th APS Topical Conference on Shock Compression of Condensed Matter. American Physical Society

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  25. Published

    Equation of state of polytetrafluoroethylene

    G, G. III. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 8966-8969 3 p.

    Research output: Contribution to journalArticle

  26. Published

    Experiment and Theory for the Characterization of Porous Materials

    Resnyansky, A. & Bourne, N., 2002, Experiment and Theory for the Characterization of Porous Materials.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  27. Published

    Experimental and Numerical Study of Free-Field Blast Mitigation

    Milne, A., Longbottom, A. W., Kirkpatrick, D. J., Bourne, N. & Allen, R. M., 20 Jul 2004, Experimental and Numerical Study of Free-Field Blast Mitigation.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  28. Published

    Experimental and Numerical Study of Temperatures in Cavity Collapse

    Milne, A. & Bourne, N., 8 Jul 2002, Experimental and Numerical Study of Temperatures in Cavity Collapse.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Published

    Factors Influencing the Shape of the Fracture Wave Induced by the Rod Impact of a Brittle Material

    Resnyansky, A. & Bourne, N., 2002, Factors Influencing the Shape of the Fracture Wave Induced by the Rod Impact of a Brittle Material.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  30. Published

    Fundamental Considerations in Fracture in Nuclear Materials

    Cady, C. M., Eastwood, D., Bourne, N., Liu, C., Pei, R., Mummery, P., Bodel, W., Wade, J., Krishna, R., Cipiccla, S., A.J. Bodey, Wanelik, K. & Rau, C., 2018, APS Topical Conference on the Shock Compression of Matter.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  31. Published

    Gas Gun for Dynamic Loading of Explosives

    Bourne, N., 2004, In : Review of Scientific Instruments. 75, 0, p. 38869-38869

    Research output: Contribution to journalArticle

  32. Published

    High-rate Compaction of Aluminium Alloy Foams

    Milne, A., Millett, J. C., Harrigan, J., Bourne, N., Tan, P. J., Withers, P., Reid, S. & Hung, Y. C., 2005, High-rate Compaction of Aluminium Alloy Foams.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    Impact and Damage of an Armour Composite

    Resnyansky, A. D., Parry, S., Bourne, N., Townsend, D. & James, B., 13 Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. Published

    Impacting brittle materials using a designed fast indentation device

    Mirihanage, W., Olbinado, M., Bourne, N. K., Rau, C. & Rack, A., 1 Jun 2017.

    Research output: Contribution to conferencePaper

  35. Published

    Impacting Silicates Using a Fast Indentation Device

    Mirihanage, W. U., Olbinado, M., Bourne, N., Rau, C. & Rack, A., 2018, APS Topical Conference on the Shock Compression of Matter 2017. 070021

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  36. Published

    Influence of anisotropy (crystallographic and microstructural) on spallation in Zr, Ta, HY-100 steel, and 1080 eutectoid steel

    Gray, G. T., Bourne, N. K., Vecchio, K. S. & Millett, J. C. F., May 2010, In : International Journal of Fracture. 163, 1-2, p. 243-258 15 p.

    Research output: Contribution to journalArticle

  37. Published

    Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel

    Gray III, G., Vecchio, K. S., Lopez, M. R. & Bourne, N., 2001, Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Published

    Influence of Shock-Wave Profile Shape ('Taylor-Wave' versus Square-Topped) on the Shock-Hardening and Spallation Response of 316L Stainless Steel

    Gray III, G., Lopez, M. F. & Bourne, N., 2004, Influence of Shock-Wave Profile Shape ('Taylor-Wave' versus Square-Topped) on the Shock-Hardening and Spallation Response of 316L Stainless Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. Published

    Influence of Shock-wave Profile Shape (Triangular -

    Henrie, B., G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 773-778 5 p.

    Research output: Contribution to journalArticle

  40. Published

    Investigation on grain size effect in high strain rate ductility of 1100 pure aluminum

    Bonora, N., Bourne, N., Ruggiero, A., Iannitti, G. & Testa, G., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  41. Published

    Lateral stress and shear strength behind the shock front in three face centered cubic metals

    Millett, J. C. F., Whiteman, G. & Bourne, N. K., 2009, In : Journal of Applied Physics. 105, 3, 033515.

    Research output: Contribution to journalArticle

  42. Published

    Lateral stress and shear strength measurements in polycrystalline potassium chloride, above and below the B1/B2 phase transition during shock loading

    Millet, J., Bourne, N. & Rosenberg, Z., 2002, In : Journal of Applied Physics. 91, 0, p. 4777-4779 2 p.

    Research output: Contribution to journalArticle

  43. Published

    Lateral stress measurements and shear strength in shock loaded tungsten carbide

    Dandekar, D., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 96, 0, p. 3727-3732 5 p.

    Research output: Contribution to journalArticle

  44. Published

    Lateral stress measurements in a shock loaded alumina: Shear strength and delayed failure

    Millet, J. & Bourne, N., 2001, In : Journal of Materials Science. 36, 14, p. 3409-3414 5 p.

    Research output: Contribution to journalArticle

  45. Published

    Lateral Stress Measurements in a Shock Loaded Silicon Carbide: Shear Strength and Delayed Failure

    Eatwell, M. & Bourne, N., 2004, Lateral Stress Measurements in a Shock Loaded Silicon Carbide: Shear Strength and Delayed Failure. Vol. 706.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Published

    Lateral Stress Measurements In Pure Tungsten During Shock Loading

    Gray III, G. & Bourne, N., 2006, Lateral Stress Measurements In Pure Tungsten During Shock Loading. Vol. 845. p. 753-756

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Published

    Longitudinal and Lateral Stress Measurements in NiTi Under One-Dimensional Shock Loading

    Wallwork, A., Workman, A., Bourne, N. & Meziere, Y., 2005, Longitudinal and Lateral Stress Measurements in NiTi Under One-Dimensional Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Published

    Longitudinal and Lateral Stress Measurements in Shock Loaded Polyether Ether Ketone

    G, G. III. & Bourne, N., 2004, Longitudinal and Lateral Stress Measurements in Shock Loaded Polyether Ether Ketone.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Published

    Materials in Mechanical Extremes: Fundamentals and Applications

    Bourne, N. K., 2013, Cambridge University Press.

    Research output: Book/ReportBook

  50. Published

    Materials' physics in extremes: Akrology

    Bourne, N. K., Oct 2011, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42, 10, p. 2975-2984 9 p.

    Research output: Contribution to journalArticle

  51. Published

    Materials science: Atomistic views of deformation

    Bourne, N. K., 2017, In : Nature. 550, 7677, p. 461-463 3 p.

    Research output: Contribution to journalArticle

  52. Published

    Measurement Of The Pressure Pulse From A Detonating Explosive

    Milne, A., Bourne, N. & Biers, R., 2005, In : Journal of Physics D: Applied Physics. 38, 12, p. 1984-1988 4 p.

    Research output: Contribution to journalArticle

  53. Published

    Measurements of the Conductivity of Shocked Polymethylmethacrylate

    Townsend, D. & Bourne, N., 2001, Measurements of the Conductivity of Shocked Polymethylmethacrylate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  54. Published

    Mechanical and Substructural Response of Incipiently Spalled 316L Stainless Steel

    G, G. III. & Bourne, N., 2005, Mechanical and Substructural Response of Incipiently Spalled 316L Stainless Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Published

    Mesoscale modelling of the response of aluminas

    Bourne, N., 2005, Mesoscale modelling of the response of aluminas.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Published

    Microstructural changes in shocked alumina

    Dandekar, D. D., Chen, M., Bourne, N. & Grreen, W., 2005, Microstructural changes in shocked alumina.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Published

    Microstructure of Ti64 as function of strain rate

    Loretto, M., Bourne, N. & Wu, X., 2005, Microstructure of Ti64 as function of strain rate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Published

    Modeling shock waves in orthotropic elastic materials

    Vignjevic, R., Campbell, J. C., Bourne, N. K. & Djordjevic, N., 2008, In : Journal of Applied Physics. 104, 4, 044904.

    Research output: Contribution to journalArticle

  59. Published

    Modelling of spall in an anisotropic aluminiumalloy

    Campbell, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2004, In : Space Debris. 2, 4, p. 225-232 7 p.

    Research output: Contribution to journalArticle

  60. Published

    Morphological Studies of an Inert Polymer Binder Subjected to Shock Loading

    Akhavan, J., Bourne, N. & Longjohn, R., 2004, Morphological Studies of an Inert Polymer Binder Subjected to Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  61. Published

    New Insights into Shock Propagation in Glass

    Cooper, G. & Bourne, N., 2004, New Insights into Shock Propagation in Glass.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  62. Published

    On Cavity Collapse and Subsequent Ignition

    Milne, A. & Bourne, N., 2002, Proceedings of the Twelfth International Symposium on Detonation. 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Published

    On compression and damage evolution in PTFE and PEEK

    Rau, C., Parry, S., Garcea, S., Bourne, N., Mcdonald, S., Eastwood, D., Brown, E. N. & Withers, P., 13 Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. American Institute of Physics

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  64. Published

    On compression and damage evolution in two thermoplastics

    Bourne, N., Garcea, S., Eastwood, D., Parry, S., Rau, C., Withers, P., Mcdonald, S. & Brown, E. N., 2017, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

    Research output: Contribution to journalArticle

  65. Published

    On Conductivity Changes in Shocked Potassium Chloride

    Townsend, D., Braithwaite, M. & Bourne, N., 2005, In : Journal of Applied Physics. 97, 0, p. 123506-12350 111156 p.

    Research output: Contribution to journalArticle

  66. Published

    On designing structures for extreme environments

    Bourne, N. K., Oct 2012, In : International Journal of Impact Engineering. 48, p. 107-115 8 p.

    Research output: Contribution to journalArticle

  67. Published

    On Failure in Polycrystalline and Amorpous Brittle Materials

    Bourne, N. K., Elert, M. L. (ed.), Buttler, W. T. (ed.), Furnish, M. D. (ed.), Anderson, W. W. (ed.) & Proud, W. G. (ed.), 2009, Shock Compression of Condensed Matter - 2009, Pts 1 and 2. Vol. 1195. p. 993-998 6 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  68. Published

    On Impacting Liquid Jets and Drops Onto PolyMethylMethacrylate Targets

    Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 461, 2056, p. 1129-1145 16 p.

    Research output: Contribution to journalArticle

  69. Published

    On investigations into the UK large scale gap test

    Milne, A., Bourne, N., Hollands, R., Burley, S. J. & Fung, V., 2005.

    Research output: Contribution to conferencePoster

  70. Published

    On kinetics of failure in, and resistance to penetration of metals and ceramics

    Bourne, N. K., 1 Nov 2010, In : Advances in Applied Ceramics. 109, 8, p. 480-486 6 p.

    Research output: Contribution to journalArticle

  71. Published

    On Shock-Induced Yield In Brittle Materials

    Bourne, N., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  72. Published

    On strength at yield in condensed matter

    Bourne, N. K., 2015, In : Metallurgical and Materials Transactions A. 46, 10, p. 4491-4497 7 p.

    Research output: Contribution to journalArticle

  73. Published

    On Strengthening during Quasi-Isentropic Loading

    Millet, J. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  74. Published

    On Stress Wave Interactions in Liquid Impact

    Bourne, N., 2005, In : Wear. 258, 0, p. 588-595 7 p.

    Research output: Contribution to journalArticle

  75. Published

    On the behaviour of body-centred cubic metals to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Park, N. T., Whiteman, G. & Gray, G. T., Jun 2011, In : Journal of Materials Science. 46, 11, p. 3899-3906 7 p.

    Research output: Contribution to journalArticle

  76. Published

    On the behaviour of the magnesium alloy, AZ61 to one-dimensional shock loading

    Millett, J. C. F., Stirk, S. M., Bourne, N. K. & Gray, G. T., Oct 2010, In : Acta Materialia. 58, 17, p. 5675-5682 7 p.

    Research output: Contribution to journalArticle

  77. Published

    On the collapse of cavities

    Bourne, N., 2002, In : Shock Waves. 11, 6, p. 447-455 8 p.

    Research output: Contribution to journalArticle

  78. Published

    On the collapse of cavities

    Bourne, N., 2001, On the collapse of cavities.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  79. Published

    On the compression of aluminium foam structures under shock

    Townsend, D., Parry, S., Bourne, N., Withers, P., Wood, D. C., Appleby-Thomas, G. J. & Hameed, A., 13 Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  80. Published

    On the Dynamic Response of Four Polymers

    G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 815-820 5 p.

    Research output: Contribution to journalArticle

  81. Published

    On the dynamic tensile strength of an FCC metal

    Bourne, N., Jones, D., Fensin, S., Trujillo, C., Martinez, D. & Gray III, G. T., 2018, APS Topical Conference on the Shock Compression of Matter.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  82. Published

    On the Failure and Dynamic Performance of Materials

    Bourne, N. K., Feb 2012, In : Experimental Mechanics. 52, 2, p. 153-159 6 p.

    Research output: Contribution to journalArticle

  83. Published

    On the Failure of Boron Carbide under Shock

    Bourne, N., 2001, On the Failure of Boron Carbide under Shock.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  84. Published

    On the failure of shocked titanium diboride

    G, G. III. & Bourne, N., 2002, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 458, 2022, p. 1273-1284 11 p.

    Research output: Contribution to journalArticle

  85. Published

    On the high-rate failure of carbon fibre composites

    Frias, C., Bourne, N., Townsend, D., Soutis, C. & Withers, P., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. Published

    On the High-Rate Response of Teflon, Estane and Kel-F-800

    G, G. III. & Bourne, N., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  87. Published

    On the Hugoniot elastic limit in polycrystalline alumina

    Bourne, N. K., Millett, J. C. F., Chen, M., McCauley, J. W. & Dandekar, D. P., 2007, In : Journal of Applied Physics. 102, 7, 073514.

    Research output: Contribution to journalArticle

  88. Published

    On The Impact and Penetration Of Soda Lime Glass

    Bourne, N., 2005, In : International Journal of Impact Engineering. 32, 0, p. 65-79 14 p.

    Research output: Contribution to journalArticle

  89. Published

    On the influence of chain morphology on the shock response of three thermoplastics

    Bourne, N. K. & Millett, J. C. F., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 266-271 5 p.

    Research output: Contribution to journalArticle

  90. Published

    On the laser ignition and initiation of explosives

    Bourne, N., 2001, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 457, 2010, p. 1401-1426 25 p.

    Research output: Contribution to journalArticle

  91. Published

    On the Measurement of Shear-Strength in Quasi-isentropic Loading

    Gray III, G., Bourne, N. & Rosenberg, Z., 2002, On the Measurement of Shear-Strength in Quasi-isentropic Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published

    On the one-dimensional recovery and microstructural evaluation of shocked alumina

    Dandekar, D., Bourne, N. & Green, W., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  93. Published

    On the Recovery of One-dimensionally Shocked Materials

    G, G. III. & Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 0

    Research output: Contribution to journalArticle

  94. Published

    On the response to shock of foil stress sensors in ceramics

    Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1201-1207 6 p.

    Research output: Contribution to journalArticle

  95. Published

    On the shock compression of polycrystalline metals

    Bourne, N. K., Millett, J. C. F. & Gray, G. T., 2009, In : Journal of Materials Science. 44, 13, p. 3319-3343 24 p.

    Research output: Contribution to journalArticle

  96. Published

    On the shock response of cubic metals

    Bourne, N. K., Gray, G. T. & Millett, J. C. F., 2009, In : Journal of Applied Physics. 106, 9, 091301.

    Research output: Contribution to journalArticle

  97. Published

    On the shock response of piezoresistive gauges

    Bourne, N., 2004, In : Measurement Science and Technology. 15, 2, p. 425-431 6 p.

    Research output: Contribution to journalArticle

  98. Published

    On the Shock Response of Polychloroprene

    Gray III, G., Cooper, G. & Bourne, N., 2001, On the Shock Response of Polychloroprene.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  99. Published

    On the Shock Response of Polymers to Extreme Loading

    Bourne, N., 1 Feb 2016, In : Journal of Dynamic Behavior of Materials. 2, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticle

  100. Published

    On the Shock Response of the Shape Memory Alloy NiTi

    Gray III, G., Stevens, G. & Bourne, N., 2001, On the Shock Response of the Shape Memory Alloy NiTi.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

Previous 1 2 3 Next

Research Explorer downloads

114

Research output: Contribution to journalArticle

81

Research output: Chapter in Book/Report/Conference proceedingConference contribution

78

Research output: Chapter in Book/Report/Conference proceedingConference contribution

58

Research output: Chapter in Book/Report/Conference proceedingConference contribution

56

Research output: Chapter in Book/Report/Conference proceedingConference contribution