Prof Neil K. Bourne

Professor of Matter in Extreme Environmt

Full contact details
View graph of relations

Publications

  1. 2001
  2. Published

    A gas gun for plane and shear loading of inert and explosive targets

    Stevens, G. & Bourne, N., 2001, In : Review of Scientific Instruments. 72, 0, p. 2214-2218 4 p.

    Research output: Contribution to journalArticle

  3. Published

    Decay of the elastic precursor in a filled glass

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 5368-5371 3 p.

    Research output: Contribution to journalArticle

  4. Published

    Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel

    Gray III, G., Vecchio, K. S., Lopez, M. R. & Bourne, N., 2001, Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Lateral stress measurements in a shock loaded alumina: Shear strength and delayed failure

    Millet, J. & Bourne, N., 2001, In : Journal of Materials Science. 36, 14, p. 3409-3414 5 p.

    Research output: Contribution to journalArticle

  6. Published

    Measurements of the Conductivity of Shocked Polymethylmethacrylate

    Townsend, D. & Bourne, N., 2001, Measurements of the Conductivity of Shocked Polymethylmethacrylate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    On the collapse of cavities

    Bourne, N., 2001, On the collapse of cavities.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  8. Published

    On the Failure of Boron Carbide under Shock

    Bourne, N., 2001, On the Failure of Boron Carbide under Shock.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published

    On the laser ignition and initiation of explosives

    Bourne, N., 2001, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 457, 2010, p. 1401-1426 25 p.

    Research output: Contribution to journalArticle

  10. Published

    On the response to shock of foil stress sensors in ceramics

    Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1201-1207 6 p.

    Research output: Contribution to journalArticle

  11. Published

    On the Shock Response of Polychloroprene

    Gray III, G., Cooper, G. & Bourne, N., 2001, On the Shock Response of Polychloroprene.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published

    On the Shock Response of the Shape Memory Alloy NiTi

    Gray III, G., Stevens, G. & Bourne, N., 2001, On the Shock Response of the Shape Memory Alloy NiTi.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  13. Published

    Shear strength measurements in the TiAl-based alloy Ti-48Al-2Nb-2Cr-1B during shock loading

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1188-1191 3 p.

    Research output: Contribution to journalArticle

  14. Published

    Shock Induced Mechanical Response of a g - TiAl Alloy

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2566-2570 4 p.

    Research output: Contribution to journalArticle

  15. Published

    Shock Response of the Elastomer Polychloroprene

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2576-2579 3 p.

    Research output: Contribution to journalArticle

  16. Published

    The Deviatoric Response of an Epoxy Resin to One-Dimensional Shock Loading

    Belcher, I., Barnes, N. & Bourne, N., 2001, The Deviatoric Response of an Epoxy Resin to One-Dimensional Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Published

    The Effect of Microstructure on the Shock Behaviour of g-Titanium Aluminides

    G, G. III., Jones, I. & Bourne, N., 2001, Georgia Bulletin of the American Physical Society. 4 ed. Vol. 46.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Published

    The onset of damage in shocked alumina

    Bourne, N., 2001, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 457, 2013, p. 2189-2205 16 p.

    Research output: Contribution to journalArticle

  19. Published

    The Shock Hugoniot of an Epoxy Resin

    Barnes, N. & Bourne, N., 2001, The Shock Hugoniot of an Epoxy Resin.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  20. 2002
  21. Published

    Effects of orientation on the strength of the aluminum alloy 7010-T6 during shock loading: Experiment and simulation

    Millet, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2002, In : Journal of Applied Physics. 92, 0, p. 4342-4348 6 p.

    Research output: Contribution to journalArticle

  22. Published

    Experiment and Theory for the Characterization of Porous Materials

    Resnyansky, A. & Bourne, N., 2002, Experiment and Theory for the Characterization of Porous Materials.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Published

    Factors Influencing the Shape of the Fracture Wave Induced by the Rod Impact of a Brittle Material

    Resnyansky, A. & Bourne, N., 2002, Factors Influencing the Shape of the Fracture Wave Induced by the Rod Impact of a Brittle Material.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Published

    Lateral stress and shear strength measurements in polycrystalline potassium chloride, above and below the B1/B2 phase transition during shock loading

    Millet, J., Bourne, N. & Rosenberg, Z., 2002, In : Journal of Applied Physics. 91, 0, p. 4777-4779 2 p.

    Research output: Contribution to journalArticle

  25. Published

    On Cavity Collapse and Subsequent Ignition

    Milne, A. & Bourne, N., 2002, Proceedings of the Twelfth International Symposium on Detonation. 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. Published

    On the collapse of cavities

    Bourne, N., 2002, In : Shock Waves. 11, 6, p. 447-455 8 p.

    Research output: Contribution to journalArticle

  27. Published

    On the failure of shocked titanium diboride

    G, G. III. & Bourne, N., 2002, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 458, 2022, p. 1273-1284 11 p.

    Research output: Contribution to journalArticle

  28. Published

    On the Measurement of Shear-Strength in Quasi-isentropic Loading

    Gray III, G., Bourne, N. & Rosenberg, Z., 2002, On the Measurement of Shear-Strength in Quasi-isentropic Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  29. Published

    On the Strength Behaviour of Kel-F-800 and Estane Polymers

    Gray III, G., Bourne, N. & Mort, P., 2002, On the Strength Behaviour of Kel-F-800 and Estane Polymers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  30. Published

    Shock-induced Brittle Failure of Boron Carbide

    Bourne, N., 2002, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 458, 2024, p. 1999-2006 7 p.

    Research output: Contribution to journalArticle

  31. Published

    The behavior of an epoxy resin under one-dimensional shock loading

    Millet, J., Barnes, N. & Bourne, N., 2002, In : Journal of Applied Physics. 21, 0, p. 6590-6594 4 p.

    Research output: Contribution to journalArticle

  32. Published

    The behaviour of the shape memory alloy NiTi during one-dimensional shock loading

    G, G. III., Millet, J. & Bourne, N., 2002, In : Journal of Applied Physics. 92, 0, p. 3107-3110 3 p.

    Research output: Contribution to journalArticle

  33. Published

    The Effect of Orientation on the Spall Strength of the Aluminum Alloy 7010-T6

    Edwards, M. & Bourne, N., 2002, AIP Conference Proceedings. Vol. 620. p. 523-526 4 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. Published

    The Failure of Aluminium Nitride under Shock

    Pickup, I. M. & Bourne, N., 2002, The Failure of Aluminium Nitride under Shock.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  35. Published

    The response of TiAl based alloys to one-dimensional shock loading

    G, G. III., Jones, I., Millet, J. & Bourne, N., 2002, In : Acta Materialia. 50, 19, p. 4801-4811 10 p.

    Research output: Contribution to journalArticle

  36. Published

    The Shear Strength of Potassium Chloride above the B1-B2 Phase Transition during Shock Loading

    Bourne, N., 2002, The Shear Strength of Potassium Chloride above the B1-B2 Phase Transition during Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  37. Published

    Spallation in the Alloy Ti-6Al-4V

    Bourne, N., Church, P. D. & Andrews, T., Jun 2002, AIP Conference Proceedings;2002. 1 ed. Vol. 620.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  38. Published

    Experimental and Numerical Study of Temperatures in Cavity Collapse

    Milne, A. & Bourne, N., 8 Jul 2002, Experimental and Numerical Study of Temperatures in Cavity Collapse.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  39. 2003
  40. Published

    A 50 mm bore gas gun for dynamic loading of materials and structures

    Bourne, N., 2003, In : Measurement Science and Technology. 14, 13, p. 273-279 6 p.

    Research output: Contribution to journalArticle

  41. Published

    Constitutive modeling of fracture waves

    Resnyansky, A., Romensky, I. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 1537-1545 8 p.

    Research output: Contribution to journalArticle

  42. Published

    Crystallographic texture effects on mixed-mode strain localization for lower symmetry metals

    G, T. G. III., Bingert, J. F., Bourne, N. & Maudlin, P. J., 2003, Crystallographic texture effects on mixed-mode strain localization for lower symmetry metals.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Published

    Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates

    Loretto, M. H., Zakaria, M., Bourne, N. & Wu, X., 2003, Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  44. Published

    Development of magnetic gauges for the measurement of particle velocities during one-dimensional shock loading

    Millet, J. & Bourne, N., 2003, In : Measurement Science and Technology. 14, 15, p. 601-606 5 p.

    Research output: Contribution to journalArticle

  45. Published

    Dynamic Loading of a Designer Composite

    Vecchio, K. S. & Bourne, N., 2003, Dynamic Loading of a Designer Composite.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  46. Published

    Equation of state of polytetrafluoroethylene

    G, G. III. & Bourne, N., 2003, In : Journal of Applied Physics. 93, 0, p. 8966-8969 3 p.

    Research output: Contribution to journalArticle

  47. Published

    Influence of Shock-wave Profile Shape (Triangular -

    Henrie, B., G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 773-778 5 p.

    Research output: Contribution to journalArticle

  48. Published

    On the Dynamic Response of Four Polymers

    G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 815-820 5 p.

    Research output: Contribution to journalArticle

  49. Published

    On the strength of g-titanium aluminides during shock loading

    G, G. III., Jones, I., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 929-934 5 p.

    Research output: Contribution to journalArticle

  50. Published

    Plate Impact Response of Tantalum: Lateral Stress and Shear Strength Through The Front

    G, G. III., Millet, J. & Bourne, N., 2003, In : Journal of Applied Physics. 94, 0, p. 6430-6436 6 p.

    Research output: Contribution to journalArticle

  51. Published

    Plate Impact Study of the Shock to Detonation Transition in a PBX

    Longbottom, A. W., Cooper, G., Murray, I., Milne, N. K., Bourne, N. & Hollands, R., 2003, Plate Impact Study of the Shock to Detonation Transition in a PBX.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  52. Published

    The high-rate response of an elastomer

    Millet, J. & Bourne, N., 2003, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 459, 2031, p. 567-576 9 p.

    Research output: Contribution to journalArticle

  53. Published

    The Temperature of a Shock-Collapsed Cavity

    Milne, A. & Bourne, N., 2003, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 459, 2036, p. 1851-1861 10 p.

    Research output: Contribution to journalArticle

  54. Published

    The vulnerability of explosives to low velocity impact

    Milne, A., Wallace, I. G., Bourne, N. & Barnes, P., 2003, The vulnerability of explosives to low velocity impact.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  55. Published

    Propagation of Waves through a Float Glass Laminate

    Bourne, N. & Rosenberg, Z., Jul 2003, Propagation of Waves through a Float Glass Laminate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  56. Published

    The Shock Behaviour of a SiO2-Li2O Transparent Glass-Ceramic Armour Material

    Pickup, I. M. & Bourne, N., Jul 2003, The Shock Behaviour of a SiO2-Li2O Transparent Glass-Ceramic Armour Material.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. 2004
  58. Published

    Ballistic Impact Of A Hard Projectile Against A Block Of Glass

    Resnyansky, A. & Bourne, N., 2004, 21st International Sympoisum On Ballistics.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Published

    Dynamic Properties of Nickel-Titanium Alloys

    Hauer, A., Paisley, D. L., Swift, D., Thoma, D., G, G. III., Cooley, J., Bourne, N. & Hackenberg, R., 2004, AIP Conf. Proc. Vol. 706. p. 561-564

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Published

    Effect of internal strain on the propagation of failure in shock loaded soda-lime glass

    Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 4681-4686 5 p.

    Research output: Contribution to journalArticle

  61. Published

    Gas Gun for Dynamic Loading of Explosives

    Bourne, N., 2004, In : Review of Scientific Instruments. 75, 0, p. 38869-38869

    Research output: Contribution to journalArticle

  62. Published

    Influence of Shock-Wave Profile Shape ('Taylor-Wave' versus Square-Topped) on the Shock-Hardening and Spallation Response of 316L Stainless Steel

    Gray III, G., Lopez, M. F. & Bourne, N., 2004, Influence of Shock-Wave Profile Shape ('Taylor-Wave' versus Square-Topped) on the Shock-Hardening and Spallation Response of 316L Stainless Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  63. Published

    Lateral stress measurements and shear strength in shock loaded tungsten carbide

    Dandekar, D., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 96, 0, p. 3727-3732 5 p.

    Research output: Contribution to journalArticle

  64. Published

    Lateral Stress Measurements in a Shock Loaded Silicon Carbide: Shear Strength and Delayed Failure

    Eatwell, M. & Bourne, N., 2004, Lateral Stress Measurements in a Shock Loaded Silicon Carbide: Shear Strength and Delayed Failure. Vol. 706.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  65. Published

    Longitudinal and Lateral Stress Measurements in Shock Loaded Polyether Ether Ketone

    G, G. III. & Bourne, N., 2004, Longitudinal and Lateral Stress Measurements in Shock Loaded Polyether Ether Ketone.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  66. Published

    Modelling of spall in an anisotropic aluminiumalloy

    Campbell, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2004, In : Space Debris. 2, 4, p. 225-232 7 p.

    Research output: Contribution to journalArticle

  67. Published

    Morphological Studies of an Inert Polymer Binder Subjected to Shock Loading

    Akhavan, J., Bourne, N. & Longjohn, R., 2004, Morphological Studies of an Inert Polymer Binder Subjected to Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  68. Published

    New Insights into Shock Propagation in Glass

    Cooper, G. & Bourne, N., 2004, New Insights into Shock Propagation in Glass.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Published

    On the shock response of piezoresistive gauges

    Bourne, N., 2004, In : Measurement Science and Technology. 15, 2, p. 425-431 6 p.

    Research output: Contribution to journalArticle

  70. Published

    Quasi-Static and Shock Induced Mechanical Response of an Aluminium-Zinc-Magnesium Alloy as a Function of Heat Treatment

    Edwards, M. & Bourne, N., 2004, Quasi-Static and Shock Induced Mechanical Response of an Aluminium-Zinc-Magnesium Alloy as a Function of Heat Treatment.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  71. Published

    Shock compression of Dry and Hydrated Sand

    Resnyansky, A. & Bourne, N., 2004, Shock compression of Dry and Hydrated Sand.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  72. Published

    Shock to Detonation Transition in a Plastic Bonded Explosive

    Milne, A. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 2379-2385 6 p.

    Research output: Contribution to journalArticle

  73. Published

    Shock Wave Compression of a Porous Material

    Resnyansky, A. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 1760-1769 9 p.

    Research output: Contribution to journalArticle

  74. Published

    Simulation of Void Collapse in Ammonium Nitrate Using a Meshfree Lagrangian Particle Method

    Libersky, L. D., Bourne, N., Randles, P. W. & Vignjevic, R., 2004, Simulation of Void Collapse in Ammonium Nitrate Using a Meshfree Lagrangian Particle Method.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  75. Published

    The effect of heat treatment on the shock induced mechanical properties of the aluminium alloy, 7017

    Millet, J., Edwards, M. & Bourne, N., 2004, In : Scripta Materialia. 51, 0, p. 967-971 4 p.

    Research output: Contribution to journalArticle

  76. Published

    The Effect of Shock Rise Time on Strength of Alumina in 1-D Stress and 1-D Strain

    Bourne, N. & Bless, S. J., 2004, AIP Conference Proceedings.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  77. Published

    The equation of state of a fluorinated tripolymer

    G, G. III., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 96, 0, p. 5500-5504 4 p.

    Research output: Contribution to journalArticle

  78. Published

    The response of hydroxy-terminated polybutadiene to one-dimensional shock loading

    Akhavan, J., Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 4722-4727 5 p.

    Research output: Contribution to journalArticle

  79. Published

    The response of polyether ether ketone to one dimensional shock loading

    G, G. III., Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 6, p. 942-947 5 p.

    Research output: Contribution to journalArticle

  80. Published

    The shock Hugoniot of a plastic-bonded explosive and inert simulants

    Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 18, p. 2613-2617 4 p.

    Research output: Contribution to journalArticle

  81. Published

    The shock induced equation of state of three simple polymers

    Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 20, p. 2901-2907 6 p.

    Research output: Contribution to journalArticle

  82. Published

    The shock-induced mechanical response of the shape memory alloy, NiTi

    Millet, J. & Bourne, N., 2004, In : Materials Science and Engineering A. 378, 0, p. 138-142 4 p.

    Research output: Contribution to journalArticle

  83. Published

    The Shock Hugoniot of Two Alumina-Epoxy Composites

    Deas, D., Kos, K. & Bourne, N., Jul 2004, The Shock Hugoniot of Two Alumina-Epoxy Composites.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  84. Published

    Experimental and Numerical Study of Free-Field Blast Mitigation

    Milne, A., Longbottom, A. W., Kirkpatrick, D. J., Bourne, N. & Allen, R. M., 20 Jul 2004, Experimental and Numerical Study of Free-Field Blast Mitigation.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  85. Published

    The Shock Hugoniot of Hydroxy-Terminated Polybutadiene

    Stevens, G., Akhavan, J., Bourne, N. & Meziere, Y., 20 Jul 2004, The Shock Hugoniot of Hydroxy-Terminated Polybutadiene.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. Published

    The Taylor Impact Response of PTFE (Teflon)

    Dattelbaum, D. M., G, G. III., Bourne, N. & Rae, P. J., 20 Jul 2004, The Taylor Impact Response of PTFE (Teflon).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  87. 2005
  88. Published

    Calibration Of The Attenuator Output For The Large Scale Gap Test

    Cooper, G., Bourne, N., Hollands, R., Burley, S. & Fung, V., 2005, In : Propellants Explosives Pyrotechnics. 30, 0, p. 196-198 2 p.

    Research output: Contribution to journalArticle

  89. Published

    Equation of State and Shear Strength of Nickel And Ni-60Co Under One-Dimensional Shock Loading

    Wallwork, A., Workman, A., Bourne, N. & Meziere, Y., 2005, 14th APS Topical Conference on Shock Compression of Condensed Matter. American Physical Society

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  90. Published

    High-rate Compaction of Aluminium Alloy Foams

    Milne, A., Millett, J. C., Harrigan, J., Bourne, N., Tan, P. J., Withers, P., Reid, S. & Hung, Y. C., 2005, High-rate Compaction of Aluminium Alloy Foams.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  91. Published

    Longitudinal and Lateral Stress Measurements in NiTi Under One-Dimensional Shock Loading

    Wallwork, A., Workman, A., Bourne, N. & Meziere, Y., 2005, Longitudinal and Lateral Stress Measurements in NiTi Under One-Dimensional Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  92. Published

    Measurement Of The Pressure Pulse From A Detonating Explosive

    Milne, A., Bourne, N. & Biers, R., 2005, In : Journal of Physics D: Applied Physics. 38, 12, p. 1984-1988 4 p.

    Research output: Contribution to journalArticle

  93. Published

    Mechanical and Substructural Response of Incipiently Spalled 316L Stainless Steel

    G, G. III. & Bourne, N., 2005, Mechanical and Substructural Response of Incipiently Spalled 316L Stainless Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  94. Published

    Mesoscale modelling of the response of aluminas

    Bourne, N., 2005, Mesoscale modelling of the response of aluminas.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  95. Published

    Microstructural changes in shocked alumina

    Dandekar, D. D., Chen, M., Bourne, N. & Grreen, W., 2005, Microstructural changes in shocked alumina.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  96. Published

    Microstructure of Ti64 as function of strain rate

    Loretto, M., Bourne, N. & Wu, X., 2005, Microstructure of Ti64 as function of strain rate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  97. Published

    On Conductivity Changes in Shocked Potassium Chloride

    Townsend, D., Braithwaite, M. & Bourne, N., 2005, In : Journal of Applied Physics. 97, 0, p. 123506-12350 111156 p.

    Research output: Contribution to journalArticle

  98. Published

    On Impacting Liquid Jets and Drops Onto PolyMethylMethacrylate Targets

    Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 461, 2056, p. 1129-1145 16 p.

    Research output: Contribution to journalArticle

  99. Published

    On investigations into the UK large scale gap test

    Milne, A., Bourne, N., Hollands, R., Burley, S. J. & Fung, V., 2005.

    Research output: Contribution to conferencePoster

  100. Published

    On Shock-Induced Yield In Brittle Materials

    Bourne, N., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  101. Published

    On Strengthening during Quasi-Isentropic Loading

    Millet, J. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  102. Published

    On Stress Wave Interactions in Liquid Impact

    Bourne, N., 2005, In : Wear. 258, 0, p. 588-595 7 p.

    Research output: Contribution to journalArticle

  103. Published

    On the High-Rate Response of Teflon, Estane and Kel-F-800

    G, G. III. & Bourne, N., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  104. Published

    On The Impact and Penetration Of Soda Lime Glass

    Bourne, N., 2005, In : International Journal of Impact Engineering. 32, 0, p. 65-79 14 p.

    Research output: Contribution to journalArticle

  105. Published

    On the one-dimensional recovery and microstructural evaluation of shocked alumina

    Dandekar, D., Bourne, N. & Green, W., 2005, In : Journal of Applied Physics. 0

    Research output: Contribution to journalArticle

  106. Published

    On the Recovery of One-dimensionally Shocked Materials

    G, G. III. & Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 0

    Research output: Contribution to journalArticle

  107. Published

    On the Soft-Recovery of One-Dimensionally Shocked Polymers

    Gray III, G. & Bourne, N., 2005, On the Soft-Recovery of One-Dimensionally Shocked Polymers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  108. Published

    Plastic Deformation and Fracture of Brittle Ceramic under Shock Loading

    McCauley, J., Chen, M. & Bourne, N., 2005, In : Nature Materials. 0

    Research output: Contribution to journalArticle

  109. Published

    Shear Strength Measurements in a Shock Loaded Alumina-Filled Epoxy Resin

    Deas, D., Kos, K. & Bourne, N., 2005, Shear Strength Measurements in a Shock Loaded Alumina-Filled Epoxy Resin.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  110. Published

    Soft Recovery of Polymers and Composites

    G, G. III. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  111. Published

    Spallation in Ti-6Al-4V: Stress Measurements and Recovery

    Jones, I. & Bourne, N., 2005, Spallation in Ti-6Al-4V: Stress Measurements and Recovery.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  112. Published

    Taylor impact of polyether ether ketone

    Stevens, G., Millet, J. & Bourne, N., 2005, In : International Journal of Impact Engineering. 26, 7, p. 1086-1094 8 p.

    Research output: Contribution to journalArticle

  113. Published

    The Behaviour of a Carbon-Fibre Epoxy Composite Under Shock Loading

    Lukyanov, A., Bourne, N. & Vignjevic, R., 2005, The Behaviour of a Carbon-Fibre Epoxy Composite Under Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  114. Published

    The Behaviour of a Glass-Fibre Epoxy Composite During Plate Impact

    Eatwell, M., Bourne, N. & Meziere, Y., 2005, The Behaviour of a Glass-Fibre Epoxy Composite During Plate Impact.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  115. Published

    The Collapse of Asymmetric Voids under Shock Loading

    Milne, A. & Bourne, N., 2005, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 0

    Research output: Contribution to journalArticle

  116. Published

    The Effect Of Cobalt Additions On The Shock Response Of Nickel Alloys

    Millet, J., Bourne, N. & Meziere, Y., 2005, In : International Journal of Industrial Engineering - Applications and Practice. 0

    Research output: Contribution to journalArticle

  117. Published

    The effect of loading rate in the response of Ti-6Al-4V to one-dimensional shock loading

    Jones, I., Millet, J., Chu, M. & Bourne, N., 2005, In : Scripta Materialia. 0

    Research output: Contribution to journalArticle

  118. Published

    The Effects Of Shock Upon Insensitive Munitions

    Milne, A. & Bourne, N., 2005, In : Propellants Explosives Pyrotechnics. 0

    Research output: Contribution to journalArticle

  119. Published

    The equation of state of two alumina-filled epoxy resins

    Deas, D., Millet, J. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 38, 6, p. 930-934 4 p.

    Research output: Contribution to journalArticle

  120. Published

    The response of soda-lime glass-hydroxyterminated polybutadiene composites to shock loading

    Milne, A., Akhavan, J., Millet, J. & Bourne, N., 2005, In : Journal of Applied Physics. 97, 0, p. 43524-43524

    Research output: Contribution to journalArticle

  121. Published

    The shock properties of a La2O3 filled silicate glass

    Millet, J. & Bourne, N., 2005, In : Journal of Materials Science. 40, 14, p. 3651-3657 6 p.

    Research output: Contribution to journalArticle

  122. Published

    The shock response of float glass laminates

    Bourne, N., 2005, In : Journal of Applied Physics. 98, 0, p. 063515 -063515 

    Research output: Contribution to journalArticle

  123. 2006
  124. Published

    Calibration of commercial gauges of varying geometry to measure the lateral component of stress

    Bourne, N. & Rosenberg, Z., 2006, In : AIP Conference Proceedings. 845, 1207

    Research output: Contribution to journalArticle

  125. Published

    Lateral Stress Measurements In Pure Tungsten During Shock Loading

    Gray III, G. & Bourne, N., 2006, Lateral Stress Measurements In Pure Tungsten During Shock Loading. Vol. 845. p. 753-756

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  126. Published

    One-Dimensional Shock and Detonation Characterization of Ultrafine Hexanitrostilbene

    Knapp, I., Millett, J. C., Bourne, N. & Goveas, S. G., 2006, Shock compression of condensed matter 2005: Proceedings of the Conference of the American Physical Society topical group on shock compression of condensed matter . 1065 ed. Melville: American Institute of Physics, Vol. 845.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  127. Published

    The shock response and microstructural determination of an inert simulant

    McDonald, S. A., Bourne, N., Withers, P., Millett, J. C. F., Bennett, K. & Milne, A., 2006, The shock response and microstructural determination of an inert simulant.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  128. Published

    The Shock Hugoniot of the Intermetallic Compound, Ni3Al

    G, G. III., Knapp, I. & Bourne, N., Jul 2006, The Shock Hugoniot of the Intermetallic Compound, Ni3Al.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  129. Published

    The Shock Induced Equation of State of Two Ferroelectric Ceramics

    Deas, D. & Bourne, N., 28 Jul 2006, The Shock Induced Equation of State of Two Ferroelectric Ceramics.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  130. 2007
  131. Published

    On the Hugoniot elastic limit in polycrystalline alumina

    Bourne, N. K., Millett, J. C. F., Chen, M., McCauley, J. W. & Dandekar, D. P., 2007, In : Journal of Applied Physics. 102, 7, 073514.

    Research output: Contribution to journalArticle

  132. Published

    Unreacted Hugoniots of three plastic bonded explosives

    Milne, A. & Bourne, N., 2007, Unreacted Hugoniots of three plastic bonded explosives.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  133. Published

    The shock response of polyoxymethylene and polyethylene

    Bourne, N. K., Millett, J. C. F. & Goveas, S. G., 21 Sep 2007, In : Journal of Physics D: Applied Physics. 40, 18, p. 5714-5718 4 p., 030.

    Research output: Contribution to journalArticle

  134. Published

    The effect of orientation on the shock response of a carbon fibre-epoxy composite

    Millett, J. C. F., Bourne, N. K., Meziere, Y. J. E., Vignjevic, R. & Lukyanov, A., Dec 2007, In : Composites Science and Technology. 67, 15-16, p. 3253-3260 7 p.

    Research output: Contribution to journalArticle

  135. Published

    The shock response, simulation and microstructural determination of a model composite material

    McDonald, S. A., Millett, J. C. F., Bourne, N. K., Bennett, K., Milne, A. M. & Withers, P. J., Dec 2007, In : Journal of Materials Science. 42, 23, p. 9671-9678 7 p.

    Research output: Contribution to journalArticle

  136. 2008
  137. Published

    Modeling shock waves in orthotropic elastic materials

    Vignjevic, R., Campbell, J. C., Bourne, N. K. & Djordjevic, N., 2008, In : Journal of Applied Physics. 104, 4, 044904.

    Research output: Contribution to journalArticle

  138. Published

    Shock, release and Taylor impact of the semicrystalline thermoplastic polytetrafluoroethylene

    Bourne, N. K., Brown, E. N., Millett, J. C. F. & Gray, G. T., 2008, In : Journal of Applied Physics. 103, 7, 074902.

    Research output: Contribution to journalArticle

  139. Published

    The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading

    Millett, J. C. F., Whiteman, G., Bourne, N. K. & Gray, G. T., 2008, In : Journal of Applied Physics. 104, 7, 073531.

    Research output: Contribution to journalArticle

  140. Published

    Tacticity in shocked polymer hydrocarbons

    Bourne, N. K. & Millett, J. C. F., Jan 2008, In : Journal of Materials Science. 43, 1, p. 185-189 4 p.

    Research output: Contribution to journalArticle

  141. Published

    The shock response of aluminium foams

    Bourne, N. K., Bennett, K., Milne, A. M., MacDonald, S. A., Harrigan, J. J. & Millett, J. C. F., Jan 2008, In : Scripta Materialia. 58, 2, p. 154-157 3 p.

    Research output: Contribution to journalArticle

  142. Published

    On the influence of chain morphology on the shock response of three thermoplastics

    Bourne, N. K. & Millett, J. C. F., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 266-271 5 p.

    Research output: Contribution to journalArticle

  143. Published

    The behavior of Ni, Ni-60Co, and Ni3Al during one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K. & Gray, G. T., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 322-334 12 p.

    Research output: Contribution to journalArticle

  144. Published

    The relation of failure under 1D shock to the ballistic performance of brittle materials

    Bourne, N. K., Aug 2008, In : International Journal of Impact Engineering. 35, 8, p. 674-683 9 p.

    Research output: Contribution to journalArticle

  145. 2009
  146. Published

    Constitutive Modelling of Shock Response of PTFE

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F., Brown, E. N., Elert, M. L. (ed.), Buttler, W. T. (ed.), Furnish, M. D. (ed.), Anderson, W. W. (ed.) & Proud, W. G. (ed.), 2009, Shock Compression of Condensed Matter - 2009, Pts 1 and 2. Vol. 1195. p. 1183-1186 4 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  147. Published

    Deviatoric response of an armour-grade aluminium alloy

    Appleby-Thomas, G. J., Hazell, P. J., Millett, J. & Bourne, N. K., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 533-536 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  148. Published

    Dynamic shear strength measurements in shock-loaded molybdenum

    Stirk, S. M., Millett, J. C. F., Bourne, N. K., Whiteman, G. & Park, N. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 1123-1126 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  149. Published

    Lateral stress and shear strength behind the shock front in three face centered cubic metals

    Millett, J. C. F., Whiteman, G. & Bourne, N. K., 2009, In : Journal of Applied Physics. 105, 3, 033515.

    Research output: Contribution to journalArticle

  150. Published

    On Failure in Polycrystalline and Amorpous Brittle Materials

    Bourne, N. K., Elert, M. L. (ed.), Buttler, W. T. (ed.), Furnish, M. D. (ed.), Anderson, W. W. (ed.) & Proud, W. G. (ed.), 2009, Shock Compression of Condensed Matter - 2009, Pts 1 and 2. Vol. 1195. p. 993-998 6 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  151. Published

    On the shock compression of polycrystalline metals

    Bourne, N. K., Millett, J. C. F. & Gray, G. T., 2009, In : Journal of Materials Science. 44, 13, p. 3319-3343 24 p.

    Research output: Contribution to journalArticle

  152. Published

    On the shock response of cubic metals

    Bourne, N. K., Gray, G. T. & Millett, J. C. F., 2009, In : Journal of Applied Physics. 106, 9, 091301.

    Research output: Contribution to journalArticle

  153. Published

    Shock and awe

    Bourne, N. K., 2009, In : Physics World. 22, 1, p. 26-29 4 p.

    Research output: Contribution to journalArticle

  154. Published

    Spall experiments on stainless steel 21-6-9 varying pulse lengths and longitudinal stress

    Whiteman, G., Bourne, N. K. & Millett, J. C. F., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 1069-1072 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  155. Published

    The effect of heat treatment on the shock response of the aluminium alloy, 6061

    Chu, M. Q., Jones, I. P., Millett, J. C. F., Bourne, N. K. & Gray, G. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 953-956 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  156. Published

    The effects of shockwave profile shape and shock obliquity on spallation: Kinetic and stress-state effects on damage evolution

    Gray, G. T., Hull, L. M., Faulkner, J. R., Briggs, M. E., Cerreta, E. K., Addessio, F. L. & Bourne, N. K., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Melville, New York, Vol. 1195. p. 1097-1102 5 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  157. Published

    The role of transmission electron microscopy in assessing shock plasticity

    Chu, M. Q., Jones, I. P., Millett, J. C. F., Bourne, N. K. & Gray, G. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Melville, New York: American Institute of Physics, Vol. 1195. p. 1113-1118 5 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  158. Published

    The shock response of the magnesium -aluminium alloy, AZ61

    Millett, J. C. F., Bourne, N. K., Stirk, S. M. & Gray, G. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 957-960 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  159. Published

    Variations in the shear strength of shock loaded niobium

    Workman, A., Millett, J. C. F., Stirk, S. M., Bourne, N. K., Whiteman, G. & Park, N. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 1019-1022 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  160. 2010
  161. Published

    Influence of anisotropy (crystallographic and microstructural) on spallation in Zr, Ta, HY-100 steel, and 1080 eutectoid steel

    Gray, G. T., Bourne, N. K., Vecchio, K. S. & Millett, J. C. F., May 2010, In : International Journal of Fracture. 163, 1-2, p. 243-258 15 p.

    Research output: Contribution to journalArticle

  162. Published

    On the behaviour of the magnesium alloy, AZ61 to one-dimensional shock loading

    Millett, J. C. F., Stirk, S. M., Bourne, N. K. & Gray, G. T., Oct 2010, In : Acta Materialia. 58, 17, p. 5675-5682 7 p.

    Research output: Contribution to journalArticle

  163. Published

    The role of aging on the mechanical and microstructural response of aluminum 6061 to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Chu, M. Q., Jones, I. P., Gray, G. T. & Appleby-Thomas, G., 1 Oct 2010, In : Journal of Applied Physics. 108, 7, 073502.

    Research output: Contribution to journalArticle

  164. Published

    On kinetics of failure in, and resistance to penetration of metals and ceramics

    Bourne, N. K., 1 Nov 2010, In : Advances in Applied Ceramics. 109, 8, p. 480-486 6 p.

    Research output: Contribution to journalArticle

  165. 2011
  166. Published

    Constitutive modeling of shock response of polytetrafluoroethylene

    Resnyansky, A. D., Bourne, N. K., Millett, J. C. F. & Brown, E. N., 2011, In : Journal of Applied Physics. 110, 3

    Research output: Contribution to journalArticle

  167. Published

    Shear strength measurements in a shock loaded commercial silastomer

    Millett, J. C. F., Whiteman, G., Stirk, S. M. & Bourne, N. K., 11 May 2011, In : Journal of Physics D: Applied Physics. 44, 18, 185403.

    Research output: Contribution to journalArticle

  168. Published

    On the behaviour of body-centred cubic metals to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Park, N. T., Whiteman, G. & Gray, G. T., Jun 2011, In : Journal of Materials Science. 46, 11, p. 3899-3906 7 p.

    Research output: Contribution to journalArticle

  169. Published

    Materials' physics in extremes: Akrology

    Bourne, N. K., Oct 2011, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 42, 10, p. 2975-2984 9 p.

    Research output: Contribution to journalArticle

  170. 2012
  171. Published

    Akrology: Materials' physics in extremes

    Bourne, N. K., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1331-1334 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  172. Published

    Shock response of body centered cubic metals

    Millett, J. C. F., Cotton, M., Whiteman, G., Bourne, N. K., Park, N. T. & Gray, G. T., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1077-1080 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  173. Published

    Spallation response of Ti-6Al-4V: Rear surface velocimetry and X-ray tomography

    McDonald, S. A., Cotton, M., Bourne, N. K., Millett, J. C. F. & Withers, P. J., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1065-1068 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  174. Published

    On the Failure and Dynamic Performance of Materials

    Bourne, N. K., Feb 2012, In : Experimental Mechanics. 52, 2, p. 153-159 6 p.

    Research output: Contribution to journalArticle

  175. Published

    On designing structures for extreme environments

    Bourne, N. K., Oct 2012, In : International Journal of Impact Engineering. 48, p. 107-115 8 p.

    Research output: Contribution to journalArticle

  176. 2013
  177. Published

    Materials in Mechanical Extremes: Fundamentals and Applications

    Bourne, N. K., 2013, Cambridge University Press.

    Research output: Book/ReportBook

  178. Published

    The role of cold work on the shock response of tantalum

    Millett, J. C. F., Whiteman, G., Park, N. T., Case, S. & Bourne, N. K., 2013, In : Journal of Applied Physics. 113, 23, 233502.

    Research output: Contribution to journalArticle

  179. 2014
  180. Published

    On the Ultimate Strength of Condensed Matter

    Bourne, N. K., 2014, In : Metallurgical and Materials Transactions A. 46, 10, p. 1-8 8 p.

    Research output: Contribution to journalArticle

  181. Published

    Orientation dependence of shock induced dislocations in tantalum single crystals

    Pang, B., Jones, I., Chiu, Y., Millett, J., Whiteman, G. & Bourne, N., 2014, In : Journal of Physics: Conference Series. 522, 1

    Research output: Contribution to journalArticle

  182. Published

    Phase transition modeling of polytetrafluoroethylene during Taylor impact

    Resnyansky, A. D., Bourne, N. K., Brown, E. N., Millett, J. C. F., Rae, P. J., McDonald, S. A. & Withers, P. J., 2014, In : Journal of Applied Physics. 116, 22

    Research output: Contribution to journalArticle

  183. Published

    Production of a high-velocity water slug using an impacting technique

    Dehkhoda, S. & Bourne, N. K., 2014, In : Review of Scientific Instruments. 85, 2

    Research output: Contribution to journalArticle

  184. Published

    Shear strength developments during shock loading in tantalum alloys: Effects of cold work and alloying

    Millett, J. C. F., Whiteman, G., Bourne, N. K., Case, S. & Gray, G. T., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  185. Published

    The behaviour of niobium and molybdenum during uni-axial strain loading

    Millett, J. C. F., Cotton, M., Bourne, N. K., Park, N. T. & Whiteman, G., 2014, In : Journal of Applied Physics. 115, 7

    Research output: Contribution to journalArticle

  186. Published

    The influence of shock-loading path on the spallation response of Ta

    Gray, G. T., Bourne, N. K., Livescu, V., Trujillo, C. P., MacDonald, S. & Withers, P., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  187. Published

    The limits of strength in materials in the condensed phase

    Bourne, N. K., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  188. Published

    The threshold for hydrodynamic behaviour in solids under extreme compression

    Bourne, N. K., 2014, In : Journal of Applied Physics. 116, 9

    Research output: Contribution to journalArticle

  189. Published

    Three-dimensional characterisation and simulation of deformation and damage during Taylor impact in PTFE

    Resnyansky, A. D., McDonald, S. A., Withers, P. J., Bourne, N. K., Millett, J. C. F., Brown, E. N. & Rae, P. J., 2014, In : Journal of Physics: Conference Series. 500, 18

    Research output: Contribution to journalArticle

  190. Published

    X-ray microtomography study of the spallation response in Ta-W

    McDonald, S. A., Cotton, M., Millett, J. C. F., Bourne, N. K. & Withers, P. J., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  191. 2015
  192. Published

    On strength at yield in condensed matter

    Bourne, N. K., 2015, In : Metallurgical and Materials Transactions A. 46, 10, p. 4491-4497 7 p.

    Research output: Contribution to journalArticle

  193. Published

    Towards mechanism-based simulation of impact damage using Exascale computing

    Shterenlikht, A., Margetts, L., Mcdonald, S. & Bourne, N., 14 Jun 2015, host publication.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  194. 2016
  195. Published

    The Effects of Changing Chemistry on the Shock Response of Basic Polymers

    Millett, J. C. F., Brown, E. N., Gray III, G. T., Bourne, N., Wood, D. C. & Appleby-Thomas, G., 2016, In : Journal of Dynamic Behavior of Materials.

    Research output: Contribution to journalArticle

  196. Published

    On the Shock Response of Polymers to Extreme Loading

    Bourne, N., 1 Feb 2016, In : Journal of Dynamic Behavior of Materials. 2, 1, p. 33-42 10 p.

    Research output: Contribution to journalArticle

  197. Published
  198. Published

    Response and representation of ductile damage under varying shock loading conditions in tantalum

    Bronkhorst, C. A., Gray, G. T., Addessio, F. L., Livescu, V., Bourne, N. K., MacDonald, S. A. & Withers, P. J., 28 Feb 2016, In : Journal of Applied Physics. 119, 8, 085103.

    Research output: Contribution to journalArticle

  199. Published

    Dynamic damage in carbon-fibre composites

    Bourne, N., Parry, S., Townsend, D., Withers, P., Soutis, C. & Frias, C., 13 Jul 2016, In : Royal Society of London. Philosophical Transactions A. Mathematical, Physical and Engineering Sciences. 374, 20160018.

    Research output: Contribution to journalArticle

  200. 2017
  201. Published

    Materials science: Atomistic views of deformation

    Bourne, N. K., 2017, In : Nature. 550, 7677, p. 461-463 3 p.

    Research output: Contribution to journalArticle

  202. Published

    On compression and damage evolution in two thermoplastics

    Bourne, N., Garcea, S., Eastwood, D., Parry, S., Rau, C., Withers, P., Mcdonald, S. & Brown, E. N., 2017, In : Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

    Research output: Contribution to journalArticle

  203. Published

    Critical conditions for failure; stress levels, length scales, time scales

    Bourne, N., Gray III, C. T. & Bronkhorst, C. A., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  204. Published

    Damage development in rod-on-rod impact test on 1100 pure aluminum

    Iannitti, G., Bonora, N., Bourne, N., Ruggiero, A. & Testa, G., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  205. Published

    Investigation on grain size effect in high strain rate ductility of 1100 pure aluminum

    Bonora, N., Bourne, N., Ruggiero, A., Iannitti, G. & Testa, G., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  206. Published

    On the high-rate failure of carbon fibre composites

    Frias, C., Bourne, N., Townsend, D., Soutis, C. & Withers, P., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  207. Published

    Thresholds in Shock Response Across the Elements

    Bourne, F. L. & Bourne, N., Jan 2017, Shock Compression of Condensed Matter: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  208. Published

    Towards a final analysis of lateral gauge response

    Mcdonald, S., Bourne, N., Millett, J. C. F. & Rosenberg, Z., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  209. Published

    Impact and Damage of an Armour Composite

    Resnyansky, A. D., Parry, S., Bourne, N., Townsend, D. & James, B., 13 Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  210. Published

    On compression and damage evolution in PTFE and PEEK

    Rau, C., Parry, S., Garcea, S., Bourne, N., Mcdonald, S., Eastwood, D., Brown, E. N. & Withers, P., 13 Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. American Institute of Physics

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  211. Published

    On the compression of aluminium foam structures under shock

    Townsend, D., Parry, S., Bourne, N., Withers, P., Wood, D. C., Appleby-Thomas, G. J. & Hameed, A., 13 Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER - 2015: Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  212. Published

    Impacting brittle materials using a designed fast indentation device

    Mirihanage, W., Olbinado, M., Bourne, N. K., Rau, C. & Rack, A., 1 Jun 2017.

    Research output: Contribution to conferencePaper

  213. 2018
  214. Published

    Contrasting the Effects of Cold Rolling on the Shock Response of Typical Face Centred Cubic and Body Centred Cubic Metals

    Millett, J. C. F., Higgins, D., Whiteman, G., Pang, B., Chiu, Y-L., Jones, I. & Bourne, N., 2018, AIP Shock Compression of Condensed Matter 2017 . 060004

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  215. Published

    Fundamental Considerations in Fracture in Nuclear Materials

    Cady, C. M., Eastwood, D., Bourne, N., Liu, C., Pei, R., Mummery, P., Bodel, W., Wade, J., Krishna, R., Cipiccla, S., A.J. Bodey, Wanelik, K. & Rau, C., 2018, APS Topical Conference on the Shock Compression of Matter.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  216. Published

    Impacting Silicates Using a Fast Indentation Device

    Mirihanage, W. U., Olbinado, M., Bourne, N., Rau, C. & Rack, A., 2018, APS Topical Conference on the Shock Compression of Matter 2017. 070021

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  217. Published

    On the dynamic tensile strength of an FCC metal

    Bourne, N., Jones, D., Fensin, S., Trujillo, C., Martinez, D. & Gray III, G. T., 2018, APS Topical Conference on the Shock Compression of Matter.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  218. Published

    The Response of a Commercial Fluorinated Tri-Polymer to 1-D Shock Loading

    Whiteman, G., Millett, J. C. F., Brown, E., Gray, G. T. & Bourne, N., 2018, AIP Shock Compression of Condensed Matter 2017 . 090014

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  219. Published

    The Taylor Cylinder Response of PC and PMMA

    Resnyansky, A. D., Bourne, N. & Brown, E. N., 2018, In : AIP Conference Proceedings. 070026.

    Research output: Contribution to journalArticle

Research Explorer downloads

114

Research output: Contribution to journalArticle

80

Research output: Chapter in Book/Report/Conference proceedingConference contribution

78

Research output: Chapter in Book/Report/Conference proceedingConference contribution

58

Research output: Chapter in Book/Report/Conference proceedingConference contribution

56

Research output: Chapter in Book/Report/Conference proceedingConference contribution