Prof Neil K. Bourne

Professor of Matter in Extreme Environmt

Full contact details
View graph of relations

Publications

  1. Published

    Lateral Stress Measurements In Pure Tungsten During Shock Loading

    Gray III, G. & Bourne, N., 2006, Lateral Stress Measurements In Pure Tungsten During Shock Loading. Vol. 845. p. 753-756

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  2. Published

    On the Shock Response of the Shape Memory Alloy NiTi

    Gray III, G., Stevens, G. & Bourne, N., 2001, On the Shock Response of the Shape Memory Alloy NiTi.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  3. Published

    Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel

    Gray III, G., Vecchio, K. S., Lopez, M. R. & Bourne, N., 2001, Influence of Microstructural Anisotropy on the Spallation of 1080 Eutectoid Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. Published

    On the Strength Behaviour of Kel-F-800 and Estane Polymers

    Gray III, G., Bourne, N. & Mort, P., 2002, On the Strength Behaviour of Kel-F-800 and Estane Polymers.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Influence of Shock-Wave Profile Shape ('Taylor-Wave' versus Square-Topped) on the Shock-Hardening and Spallation Response of 316L Stainless Steel

    Gray III, G., Lopez, M. F. & Bourne, N., 2004, Influence of Shock-Wave Profile Shape ('Taylor-Wave' versus Square-Topped) on the Shock-Hardening and Spallation Response of 316L Stainless Steel.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  6. Published

    Dynamic Properties of Nickel-Titanium Alloys

    Hauer, A., Paisley, D. L., Swift, D., Thoma, D., G, G. III., Cooley, J., Bourne, N. & Hackenberg, R., 2004, AIP Conf. Proc. Vol. 706. p. 561-564

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  7. Published

    Influence of Shock-wave Profile Shape (Triangular -

    Henrie, B., G, G. III., Millet, J. & Bourne, N., 2003, In : Journal de physique. IV. Colloque. 110, 3, p. 773-778 5 p.

    Research output: Contribution to journalArticle

  8. Published

    Damage development in rod-on-rod impact test on 1100 pure aluminum

    Iannitti, G., Bonora, N., Bourne, N., Ruggiero, A. & Testa, G., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published

    The effect of loading rate in the response of Ti-6Al-4V to one-dimensional shock loading

    Jones, I., Millet, J., Chu, M. & Bourne, N., 2005, In : Scripta Materialia. 0

    Research output: Contribution to journalArticle

  10. Published

    Shock Induced Mechanical Response of a g - TiAl Alloy

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2566-2570 4 p.

    Research output: Contribution to journalArticle

  11. Published

    Spallation in Ti-6Al-4V: Stress Measurements and Recovery

    Jones, I. & Bourne, N., 2005, Spallation in Ti-6Al-4V: Stress Measurements and Recovery.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  12. Published

    Shear strength measurements in the TiAl-based alloy Ti-48Al-2Nb-2Cr-1B during shock loading

    Jones, I., Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 90, 0, p. 1188-1191 3 p.

    Research output: Contribution to journalArticle

  13. Published

    One-Dimensional Shock and Detonation Characterization of Ultrafine Hexanitrostilbene

    Knapp, I., Millett, J. C., Bourne, N. & Goveas, S. G., 2006, Shock compression of condensed matter 2005: Proceedings of the Conference of the American Physical Society topical group on shock compression of condensed matter . 1065 ed. Melville: American Institute of Physics, Vol. 845.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  14. Published

    Simulation of Void Collapse in Ammonium Nitrate Using a Meshfree Lagrangian Particle Method

    Libersky, L. D., Bourne, N., Randles, P. W. & Vignjevic, R., 2004, Simulation of Void Collapse in Ammonium Nitrate Using a Meshfree Lagrangian Particle Method.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  15. Published

    Plate Impact Study of the Shock to Detonation Transition in a PBX

    Longbottom, A. W., Cooper, G., Murray, I., Milne, N. K., Bourne, N. & Hollands, R., 2003, Plate Impact Study of the Shock to Detonation Transition in a PBX.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  16. Published

    Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates

    Loretto, M. H., Zakaria, M., Bourne, N. & Wu, X., 2003, Defect Analysis in Ti-Based Alloys Deformed at Different Strain-Rates.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  17. Published

    Microstructure of Ti64 as function of strain rate

    Loretto, M., Bourne, N. & Wu, X., 2005, Microstructure of Ti64 as function of strain rate.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  18. Published

    The Behaviour of a Carbon-Fibre Epoxy Composite Under Shock Loading

    Lukyanov, A., Bourne, N. & Vignjevic, R., 2005, The Behaviour of a Carbon-Fibre Epoxy Composite Under Shock Loading.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  19. Published

    Plastic Deformation and Fracture of Brittle Ceramic under Shock Loading

    McCauley, J., Chen, M. & Bourne, N., 2005, In : Nature Materials. 0

    Research output: Contribution to journalArticle

  20. Published

    Towards a final analysis of lateral gauge response

    Mcdonald, S., Bourne, N., Millett, J. C. F. & Rosenberg, Z., Jan 2017, SHOCK COMPRESSION OF CONDENSED MATTER : Proceedings of the Conference of the American Physical Society Topical Group on Shock Compression of Condensed Matter 2015. American Institute of Physics, Vol. 1793.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    The shock response, simulation and microstructural determination of a model composite material

    McDonald, S. A., Millett, J. C. F., Bourne, N. K., Bennett, K., Milne, A. M. & Withers, P. J., Dec 2007, In : Journal of Materials Science. 42, 23, p. 9671-9678 7 p.

    Research output: Contribution to journalArticle

  22. Published

    X-ray microtomography study of the spallation response in Ta-W

    McDonald, S. A., Cotton, M., Millett, J. C. F., Bourne, N. K. & Withers, P. J., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

  23. Published

    Spallation response of Ti-6Al-4V: Rear surface velocimetry and X-ray tomography

    McDonald, S. A., Cotton, M., Bourne, N. K., Millett, J. C. F. & Withers, P. J., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1065-1068 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  24. Published

    The shock response and microstructural determination of an inert simulant

    McDonald, S. A., Bourne, N., Withers, P., Millett, J. C. F., Bennett, K. & Milne, A., 2006, The shock response and microstructural determination of an inert simulant.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  25. Published

    Shock Response of the Elastomer Polychloroprene

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 2576-2579 3 p.

    Research output: Contribution to journalArticle

  26. Published

    Decay of the elastic precursor in a filled glass

    Millet, J. & Bourne, N., 2001, In : Journal of Applied Physics. 89, 0, p. 5368-5371 3 p.

    Research output: Contribution to journalArticle

  27. Published

    Development of magnetic gauges for the measurement of particle velocities during one-dimensional shock loading

    Millet, J. & Bourne, N., 2003, In : Measurement Science and Technology. 14, 15, p. 601-606 5 p.

    Research output: Contribution to journalArticle

  28. Published

    The behavior of an epoxy resin under one-dimensional shock loading

    Millet, J., Barnes, N. & Bourne, N., 2002, In : Journal of Applied Physics. 21, 0, p. 6590-6594 4 p.

    Research output: Contribution to journalArticle

  29. Published

    Lateral stress measurements in a shock loaded alumina: Shear strength and delayed failure

    Millet, J. & Bourne, N., 2001, In : Journal of Materials Science. 36, 14, p. 3409-3414 5 p.

    Research output: Contribution to journalArticle

  30. Published

    Lateral stress and shear strength measurements in polycrystalline potassium chloride, above and below the B1/B2 phase transition during shock loading

    Millet, J., Bourne, N. & Rosenberg, Z., 2002, In : Journal of Applied Physics. 91, 0, p. 4777-4779 2 p.

    Research output: Contribution to journalArticle

  31. Published

    The high-rate response of an elastomer

    Millet, J. & Bourne, N., 2003, In : Proceedings of the Royal Society A: Mathematical, Physical & Engineering Sciences. 459, 2031, p. 567-576 9 p.

    Research output: Contribution to journalArticle

  32. Published

    On Strengthening during Quasi-Isentropic Loading

    Millet, J. & Bourne, N., 2005, In : Journal of Physics D: Applied Physics. 0

    Research output: Contribution to journalArticle

  33. Published

    The shock Hugoniot of a plastic-bonded explosive and inert simulants

    Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 18, p. 2613-2617 4 p.

    Research output: Contribution to journalArticle

  34. Published

    The shock induced equation of state of three simple polymers

    Millet, J. & Bourne, N., 2004, In : Journal of Physics D: Applied Physics. 37, 20, p. 2901-2907 6 p.

    Research output: Contribution to journalArticle

  35. Published

    The Effect Of Cobalt Additions On The Shock Response Of Nickel Alloys

    Millet, J., Bourne, N. & Meziere, Y., 2005, In : International Journal of Industrial Engineering - Applications and Practice. 0

    Research output: Contribution to journalArticle

  36. Published

    The shock properties of a La2O3 filled silicate glass

    Millet, J. & Bourne, N., 2005, In : Journal of Materials Science. 40, 14, p. 3651-3657 6 p.

    Research output: Contribution to journalArticle

  37. Published

    The effect of heat treatment on the shock induced mechanical properties of the aluminium alloy, 7017

    Millet, J., Edwards, M. & Bourne, N., 2004, In : Scripta Materialia. 51, 0, p. 967-971 4 p.

    Research output: Contribution to journalArticle

  38. Published

    Effects of orientation on the strength of the aluminum alloy 7010-T6 during shock loading: Experiment and simulation

    Millet, J., Bourne, N., Vignjevic, R. & Vuyst, T. D., 2002, In : Journal of Applied Physics. 92, 0, p. 4342-4348 6 p.

    Research output: Contribution to journalArticle

  39. Published

    The shock-induced mechanical response of the shape memory alloy, NiTi

    Millet, J. & Bourne, N., 2004, In : Materials Science and Engineering A. 378, 0, p. 138-142 4 p.

    Research output: Contribution to journalArticle

  40. Published

    Effect of internal strain on the propagation of failure in shock loaded soda-lime glass

    Millet, J. & Bourne, N., 2004, In : Journal of Applied Physics. 95, 0, p. 4681-4686 5 p.

    Research output: Contribution to journalArticle

  41. Published

    On the behaviour of body-centred cubic metals to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Park, N. T., Whiteman, G. & Gray, G. T., Jun 2011, In : Journal of Materials Science. 46, 11, p. 3899-3906 7 p.

    Research output: Contribution to journalArticle

  42. Published

    Lateral stress and shear strength behind the shock front in three face centered cubic metals

    Millett, J. C. F., Whiteman, G. & Bourne, N. K., 2009, In : Journal of Applied Physics. 105, 3, 033515.

    Research output: Contribution to journalArticle

  43. Published

    On the behaviour of the magnesium alloy, AZ61 to one-dimensional shock loading

    Millett, J. C. F., Stirk, S. M., Bourne, N. K. & Gray, G. T., Oct 2010, In : Acta Materialia. 58, 17, p. 5675-5682 7 p.

    Research output: Contribution to journalArticle

  44. Published

    The shock response of the magnesium -aluminium alloy, AZ61

    Millett, J. C. F., Bourne, N. K., Stirk, S. M. & Gray, G. T., 2009, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1195. p. 957-960 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  45. Published

    Shock response of body centered cubic metals

    Millett, J. C. F., Cotton, M., Whiteman, G., Bourne, N. K., Park, N. T. & Gray, G. T., 2012, AIP Conference Proceedings|AIP Conf. Proc.. Vol. 1426. p. 1077-1080 3 p. (AIP Conference Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  46. Published

    The role of aging on the mechanical and microstructural response of aluminum 6061 to one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K., Chu, M. Q., Jones, I. P., Gray, G. T. & Appleby-Thomas, G., 1 Oct 2010, In : Journal of Applied Physics. 108, 7, 073502.

    Research output: Contribution to journalArticle

  47. Published

    The behavior of Ni, Ni-60Co, and Ni3Al during one-dimensional shock loading

    Millett, J. C. F., Bourne, N. K. & Gray, G. T., Feb 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 2, p. 322-334 12 p.

    Research output: Contribution to journalArticle

  48. Published

    The effect of orientation on the shock response of a carbon fibre-epoxy composite

    Millett, J. C. F., Bourne, N. K., Meziere, Y. J. E., Vignjevic, R. & Lukyanov, A., Dec 2007, In : Composites Science and Technology. 67, 15-16, p. 3253-3260 7 p.

    Research output: Contribution to journalArticle

  49. Published

    The behaviour of niobium and molybdenum during uni-axial strain loading

    Millett, J. C. F., Cotton, M., Bourne, N. K., Park, N. T. & Whiteman, G., 2014, In : Journal of Applied Physics. 115, 7

    Research output: Contribution to journalArticle

  50. Published

    Shear strength developments during shock loading in tantalum alloys: Effects of cold work and alloying

    Millett, J. C. F., Whiteman, G., Bourne, N. K., Case, S. & Gray, G. T., 2014, In : Journal of Physics: Conference Series. 500, 11

    Research output: Contribution to journalArticle

Research Explorer downloads

110

Research output: Contribution to journalArticle

79

Research output: Chapter in Book/Report/Conference proceedingConference contribution

76

Research output: Chapter in Book/Report/Conference proceedingConference contribution

58

Research output: Chapter in Book/Report/Conference proceedingConference contribution