Dr John FrancisIWE, FHEA

Reader

Full contact details
View graph of relations

Publications

  1. Published

    Characterizing phase transformations and their effects on ferritic weld residual stresses with X-rays and neutrons

    Dai, H., Francis, J. A., Stone, H. J., Bhadeshia, H. K. D. H. & Withers, P. J., 2008, In : Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science. 39, 13, p. 3070-3078 8 p.

    Research output: Contribution to journalArticle

  2. Published

    Comparison of laser welds in thick section S700 high-strength steel manufactured in flat (1G) and horizontal (2G) positions

    Guo, W., Liu, Q., Francis, J. A., Crowther, D., Thompson, A., Liu, Z. & Li, L., Aug 2015, In : C I R P Annals. 64, 1, p. 197-200 3 p.

    Research output: Contribution to journalArticle

  3. Published

    Design and Manufacture of Industrially Representative Weld Mock-ups for the Quantification of Residual Stresses in a Nuclear Pressure Vessel Steel

    Francis, J. A., Smith, M. C., Jeyaganesh, B., Vasileiou, A. N., Rathod, D. W., Roy, M. J. & Irvine, N. M., 2016, Materials Research Proceedings. p. 581-586 6 p. (Materials Research Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingChapter

  4. Published

    Design and manufacture of welded plate specimens for residual stress experiments

    Gill, C., Francis, J., Bridger, K., Turski, M., Bunney, P., Hurrell, P. R. & Bate, S. K., 2009, Proceedings of the ASME Pressure Vessels and Piping Conference--2008. New York: American Society of Mechanical Engineers, Vol. 6A-B. p. 591-602 12 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  5. Published

    Determination of residual stress at weld interruptions by neutron diffraction

    Turski, M., Francis, J. A. & Withers, P. J., 2008, In : Zeitschrift fuer Kristallographie - New Crystal Structures. 27, 0, p. 231-243 12 p.

    Research output: Contribution to journalArticle

  6. Published

    Effects of dilution on alloy content and microstructure in multi-pass steel welds

    Sun, Y. L., Obasi, G., Hamelin, C. J., Vasileiou, A. N., Flint, T. F., Balakrishnan, J., Smith, M. C. & Francis, J., 1 Mar 2019, In : Journal of Materials Processing Technology. 265, p. 71-86 16 p.

    Research output: Contribution to journalArticle

  7. Published

    Effects of stop-start features on residual stresses in a multipass austenitic stainless steel weld

    Turski, M., Francis, J. A., Hurrell, P. R., Bate, S. K., Hiller, S. & Withers, P. J., Jan 2012, In : International Journal of Pressure Vessels and Piping. 89, p. 9-18 9 p.

    Research output: Contribution to journalArticle

  8. Published

    Estimation of Type IV Cracking Tendency in Power Plant Steels

    Francis, J., Mazur, W. & Bhadeshia, H. K., 2004, In : ISIJ international. 44, 11, p. 1966-1968 2 p.

    Research output: Contribution to journalArticle

  9. Published

    Evaluation of errors associated with cutting-induced plasticity in residual stress measurements using the contour method

    Sun, Y., Roy, M., Vasileiou, A., Smith, M., Francis, J. & Hosseinzadeh, F., Jun 2017, In : Experimental Mechanics. 57, 5, p. 719-734 16 p.

    Research output: Contribution to journalArticle

  10. Published

    Evolution of Microstructure and Toughness in 2.25Cr-1Mo Steel Welds

    Elrefaey, A., Javadi, Y., Francis, J., Callaghan, M. D. & Leonard, A. J., Aug 2018, In : International Journal of Pressure Vessels and Piping. 165

    Research output: Contribution to journalArticle