Prof Grace Burke

Emeritus Professor

Full contact details
View graph of relations

Publications

  1. 2022
  2. Accepted/In press

    DEVELOPMENT OF A ROBUST PROCEDURE FOR THE EVALUATION OF STRIATION SPACINGS IN LOW CYCLE FATIGUE SPECIMENS TESTED IN A SIMULATED PWR ENVIRONMENT

    Howe, B., Mann, J., Que, Z., Huotilainen, C., Scenini, F. & Burke, G., 19 Apr 2022, (Accepted/In press) Proceedings of the ASME 2022 Pressure Vessels & Piping Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  3. Accepted/In press

    THE DEVELOPMENT OF A NEW METHOD TO COMPARE THE FATIGUE CRACK GROWTH RATES OF AUSTENITIC STAINLESS STEEL OPERATING IN A PWR PRIMARY COOLANT SUBJECTED TO PLANT REALISTIC TEMPERATURE LOADING

    Howe, B., Scenini, F., Burke, G. & Mann, J., 19 Apr 2022, (Accepted/In press) Proceedings of the ASME 2022 Pressure Vessels & Piping Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  4. 2021
  5. Published

    Internal stresses in a clad pressure vessel steel during post weld heat treatment and their relevance to underclad cracking

    Cattivelli, A., Roy, M., Burke, M. G., Dhers, J., Lee, T. L. & Francis, J., 1 Oct 2021, In: International Journal of Pressure Vessels and Piping. 193, 104448.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    The effect of martensite on stress corrosion crack initiation of austenitic stainless steels in high-temperature hydrogenated water

    Chang, L., Burke, M. G., Mukahiwa, K., Duff, J., Wang, Y. & Scenini, F., 15 Aug 2021, In: Corrosion Science . 189, 109600.

    Research output: Contribution to journalArticlepeer-review

  7. Accepted/In press

    Development of microstructure and residual stresses in electron beam welds in low alloy pressure vessel steels

    Vasileiou, A., Smith, M., Francis, J., Balakrishnan, J., Wang, Y. L., Obasi, G., Burke, M. G., Pickering, E., Gandy, D. & Irvine, N., 20 Jun 2021, (Accepted/In press) In: Materials & Design.

    Research output: Contribution to journalArticlepeer-review

  8. Accepted/In press

    Effect of stress and surface finish on Pb-caustic SCC of Alloy 690TT

    Mazzei, G., Burke, M. G., Horner, D. A. & Scenini, F., 6 Apr 2021, (Accepted/In press) In: Corrosion Science.

    Research output: Contribution to journalArticlepeer-review

  9. Accepted/In press

    The effect of low temperature heat treatment on stress corrosion crack initiation in machined 316L stainless steel in high-temperature hydrogenated water

    Chang, L., Mukahiwa, K., Duff, J., Burke, M. G. & Scenini, F., 13 Jan 2021, (Accepted/In press) In: Scripta Materialia.

    Research output: Contribution to journalArticlepeer-review

  10. 2020
  11. Published

    Comparing Xe+pFIB and Ga+FIB for TEM sample preparation of Al alloys: Minimising FIB-induced artefacts

    Zhong, X., Wade, C. A., Withers, P., Zhou, X., Cai, C., Haigh, S. & Burke, M. G., 24 Dec 2020, In: Journal of Microscopy.

    Research output: Contribution to journalArticlepeer-review

  12. E-pub ahead of print

    Thermodynamic Equivalence Charts for Stress Corrosion Cracking Studies in Hydrogenated Steam, High Pressure and Supercritical Water

    Volpe, L., Curioni, M., Burke, M. G. & Scenini, F., 21 Dec 2020, (E-pub ahead of print) In: Journal of the Electrochemical Society.

    Research output: Contribution to journalArticlepeer-review

  13. Accepted/In press

    Stress corrosion crack initiation testing with tapered specimens in high-temperature water – Results of a collaborative research project

    Bosch, R-W., Ritter, S., Herbst, M., Kilian, R., Burke, M. G., Duff, J., Scenini, F., Gu, Y., Dinu, A., Ehrnstén, U., Toivonen, A., Novotny, R., Martin, O., Perosanz, F-J., Legat, A. & Zajec, B., 24 Aug 2020, (Accepted/In press) In: Corrosion Engineering Science and Technology.

    Research output: Contribution to journalArticlepeer-review

Previous 1 2 3 4 5 6 7 8 ...14 Next

Research Explorer downloads

700

Research output: Contribution to journalArticlepeer-review

549

Research output: Contribution to journalArticlepeer-review

184

Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

180

Research output: Contribution to journalArticlepeer-review