Prof Alexander C. Smith

Professor of Electrical Machines

Full contact details
View graph of relations

Publications

  1. 2019
  2. Published

    Comparison of damping techniques for the soft-stop of ultra-fast linear actuators for HVDC breaker applications

    Vilchis-Rodriguez, D., Shuttleworth, R., Smith, A. C. & Barnes, M., 17 Jun 2019, In : The Journal of Engineering. 2019, 17, p. 4466 - 4470 5 p.

    Research output: Contribution to journalArticle

  3. Published

    Performance of high-power thomson coil actuator excited by a current pulse train

    Vilchis-Rodriguez, D., Shuttleworth, R., Smith, A. C. & Barnes, M., 17 Jun 2019, In : The Journal of Engineering. 2019, 17, p. 3937 - 3941 5 p.

    Research output: Contribution to journalArticle

  4. Published

    Virtual reality interface for HVDC substation and DC breaker design and maintenance

    Marsh, C., Barnes, M., Crowther, B., Watson, S., Vilchis-Rodriguez, D., Carmona Sanchez, J., Shuttleworth, R., Kabbabe, K., Heggo, M., Smith, A. C. & Pei, X., 6 Feb 2019, p. 1-6. 6 p.

    Research output: Contribution to conferencePaper

  5. Published

    Design, construction and test of a lightweight Thomson Coil actuator for medium voltage vacuum switch operation

    Vilchis-Rodriguez, D., Shuttleworth, R., Smith, A. C. & Barnes, M., 2019, In : IEEE Transactions on Energy Conversion. p. 0-11 11 p., TEC-00966-2018.

    Research output: Contribution to journalArticle

  6. Published

    Experimental Electrical Characterisation of Carbon Fibre Composites (CFCs) for use in Future Aircraft Applications

    Khan, J. B., Smith, A. C., Tuohy, P., Gresil, M., Soutis, C. & Lambourne, A., 2019, In : IET Science, Measurement and Technology.

    Research output: Contribution to journalArticle

  7. 2018
  8. Published

    A comparison of damping techniques for the soft-stop of ultra-fast linear actuators for HVDC breaker applications

    Vilchis-Rodriguez, D., Shuttleworth, R., Smith, A. C. & Barnes, M., 17 Apr 2018, The 9th International Conference on Power Electronics, Machines and Drives. Institution of Engineering and Technology , p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  9. Published

    Performance of a high power Thomson Coil actuator excited by a current pulse train

    Vilchis-Rodriguez, D., Shuttleworth, R., Smith, A. C. & Barnes, M., 17 Apr 2018, The 9th International Conference on Power Electronics, Machines and Drives. Institution of Engineering and Technology , p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  10. Published

    Design and experimental tests on a superconducting hybrid DC circuit breaker

    Pei, X., Cwikowski, O., Smith, A. C. & Barnes, M., 2018, In : I E E E Transactions on Applied Superconductivity. 28, 3, 5 p.

    Research output: Contribution to journalArticle

  11. Published
  12. Published

    Stator Design and Performance of Superconducting Motors for Aerospace Electric Propulsion Systems

    Manolopoulos, C., Iacchetti, M., Smith, A. C., Berger, K., Husband, M. & Miller, P., 2018, In : IEEE Transactions on Applied Superconductivity. p. 1-5 5 p.

    Research output: Contribution to journalArticle

  13. 2017
  14. Published

    Aircraft electrical network for electrically powered propulsors

    Apsley, J., Smith, A. C., Manolopoulos, C. & Edwards, H., 14 Jun 2017, IPC No. B64D 27/24 (2006.01), Patent No. GB2539547, Priority date 19 Jul 2015, Priority No. GR20150100223

    Research output: Patent

  15. Published

    Termination Unit

    Smith, A. C., 30 May 2017, Patent No. US9666336(B2), Priority date 16 Mar 2015

    Research output: Patent

  16. Published

    Fast operating moving coil actuator for a vacuum interrupter

    Pei, X., Smith, A. C., Shuttleworth, R., Vilchis-Rodriguez, D. & Barnes, M., 12 Apr 2017, In : IEEE Transactions on Energy Conversion. 32, 3, p. 931-940 10 p.

    Research output: Contribution to journalArticle

  17. Published

    AC Losses Measurement and Analysis for a 2G YBCO Coil in Metallic Containment Vessels

    Pei, X., Smith, A. C. & Barnes, M., 15 Feb 2017, In : IEEE Transactions on Applied Superconductivity. 27, 4

    Research output: Contribution to journalArticle

  18. Published

    Electromagnetic Modelling and Detection of Buried Stator Core Faults

    Bertenshaw, D. R., Ho, C. W., Smith, S., Sasic, M. & Chan, T., 2017, In : IET Electric Power Applications. 11, 2, p. 187-196 10 p.

    Research output: Contribution to journalArticle

  19. 2016
  20. Published

    Analysis of a wound rotor induction machine low frequency vibroacoustic emissions under stator winding fault conditions

    Sarma, N., Li, Q., Durovic, S., Smith, A. C. & Rowland, S., 10 Nov 2016, 8th IET International Conference on Power Electronics, Machines and Drives, PEMD; Glasgow (2016) .

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  21. Published

    Superconducting interface for a DC circuit breaker

    Pei, X., Smith, S. & Barnes, M., 10 Nov 2016, 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016): Glasgow, UK 19-21 April 2016.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  22. Published

    AC Losses Measurement and Analysis for a 2G YBCO Coil in Metallic Containment Vessels

    Pei, X., Smith, A. C. & Barnes, M., 4 Sep 2016, 2016 Applied Superconductivity Conference. Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  23. Published

    Experimental tests on a superconducting hybrid DC circuit breaker

    Pei, X., Cwikowski, O., Smith, A. C. & Barnes, M., 4 Sep 2016, 2016 Applied Superconductivity Conference.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  24. Published

    A Review of technologies for MVDC circuit breakers

    Pei, X., Cwikowski, O., Vilchis-Rodriguez, D., Barnes, M., Smith, A. & Shuttleworth, R., 30 Jun 2016, 42nd Annual Industrial Electronics Conference (IECON2016) . Institute of Electrical and Electronics Engineers

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  25. Published

    Control of a Vertical Axis Wind Turbine in Gusty Conditions

    Breslan, D., Apsley, J., Smith, S., Kirkham, S. & Towell, K., Apr 2016, 2016 Power Electronics, Machines and Drives (PEMD 2016), 8th IET International Conference on. . Institution of Engineering and Technology , 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  26. Published

    Dynamo-Electric Machine

    Smith, A. C. & Husband, S. M., 29 Mar 2016, Patent No. US9300182(B2)

    Research output: Patent

  27. Published

    Experimental testing and development of improved modelling for multistrand resistive SFCL

    Pei, X. & Smith, A., 22 Mar 2016, In : I E E E Transactions on Applied Superconductivity. 26, 4, 5 p., 5601905.

    Research output: Contribution to journalArticle

  28. Published

    Experimental tests of a resistive SFCL integrated with a vacuum interrupter

    Pei, X. & Smith, A., 1 Mar 2016, In : I E E E Transactions on Applied Superconductivity. 26, 3, 6 p., 5601206.

    Research output: Contribution to journalArticle

  29. Published

    Resistive superconducting fault current limiter AC loss measurements and analysis

    Pei, X., Zeng, X., Smith, A. C. & Malkin, D., 29 Feb 2016, In : I E E E Transactions on Applied Superconductivity.

    Research output: Contribution to journalArticle

  30. Published

    Superconductor Winding

    Smith, A. C. & Husband, S. M., 5 Jan 2016, Patent No. US9231444(B2)

    Research output: Patent

  31. Published

    FBG sensing for hot spot thermal monitoring in electric machinery random wound componenets

    Mohammed, A., Durovic, S., Smith, A. & Tshiloz, K., 2016, Electrical Machines (ICEM), 2016 XXII International Conference on.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  32. Published

    Impact of Fault Current Limiter on VSC-HVDC DC Protection

    Chang, B., Cwikowski, O., Pei, X., Barnes, M., Shuttleworth, R. & Smith, A., 2016, IET 12th International Conference on AC and DC Power Transmission.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  33. Published

    Real-Time Insulation Lifetime Monitoring for Motor Windings

    Tshiloz, K., Smith, A., Mohammed, A., Durovic, S. & Feehally, T., 2016, Electrical Machines (ICEM), 2016 XXII International Conference on.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  34. 2015
  35. Published

    Superconducting fault current limiters for HVDC systems

    Pei, X., Smith, A. & Barnes, M., 2 Dec 2015, In : Energy Procedia. 80, p. 47-55 9 p.

    Research output: Contribution to journalArticle

  36. Published

    Hybrid Fuzzy-Particle Swarm Optimization-Simplex (F-PSO-S) Algorithm for Optimum Design of PM Drive Couplings

    El-Wakeel, A. & Smith, A. C., Jul 2015, In : Electric Power Components and Systems. 43, 13, p. 1560-1571 11 p.

    Research output: Contribution to journalArticle

  37. Published

    Resistive Superconducting Fault Current Limiter Coil Design Using Multistrand MgB2 Wire

    Pei, X., Zeng, X., Smith, A. & Malkin, D., Jun 2015, In : I E E E Transactions on Applied Superconductivity. 25, 3, p. 1-5 5 p., 5602105.

    Research output: Contribution to journalArticle

  38. Published

    Supply Induced Inter-harmonic effects in Wound Rotor and Doubly-fed Induction Generators

    Djurovic, S., Vilchis-Rodriguez, D. S. & Smith, A., Jun 2015, In : I E E E Transactions on Energy Conversion. 30, 4, p. 1397 - 1408 12 p., 7119555.

    Research output: Contribution to journalArticle

  39. Published

    Using Improved Power Electronics Modelling and Turbine Control to Improve Wind Turbine Reliability

    Barnes, M., Lei, T., Smith, S., Hur, S., Stock, A. & Leithead, W., 4 May 2015, In : I E E E Transactions on Energy Conversion. p. 1043-1051 9 p.

    Research output: Contribution to journalArticle

  40. Published

    Development of irradiation capabilities to address the challenges of the nuclear industry

    Leay, L., Bower, W., Horne, G., Wady, P., Baidak, A., Pottinger, M., Nancekievill, M., Smith, S., Watson, S., Green, P., Lennox, B., LaVerne, J. A. & Pimblott, S. M., 15 Jan 2015, In : Nuclear Instruments & Methods in Physics Research. Section B: Beam Interactions with Materials and Atoms. 343, p. 62-69 7 p.

    Research output: Contribution to journalArticle

  41. 2014
  42. Published

    Investigation of induction generator wide band vibration monitoring using fibre Bragg grating accelerometers

    Vilchis-Rodriguez, D. S., Djurovic, S., Kung, P., Comanici, M. I. & Smith, S., 17 Nov 2014, Proceedings - 2014 International Conference on Electrical Machines, ICEM 2014. Institute of Electrical and Electronics Engineers , p. 1772-1778 7 p. 6960423

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  43. Published

    Superconductor device

    Smith, A. C., Royce, R. & Husband, S. M., 4 Nov 2014, Patent No. US8880134(B2)

    Research output: Patent

  44. Published

    Current Limiter

    Smith, A. C. & Husband, S. M., 28 Oct 2014, Patent No. US8873205(B2)

    Research output: Patent

  45. Published

    Superconducting Fault Current Limiter

    Smith, A. C., Royce, R. & Husband, S. M., 30 Sep 2014, Patent No. US8848323(B2)

    Research output: Patent

  46. Published

    AC loss analysis and measurements in multi-stranded MgB2 wire for resistive SFCL coils

    Zeng, X., Pei, X., Smith, A. & Malkin, D., 15 Aug 2014, Applied Superconductivity Conference, Charlotte, USA, 10-15 August 2014.. 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  47. Published

    Lamination joint reluctance in stator cores - A forgotten problem?

    Bertenshaw, D. R. & Smith, AC., Apr 2014, PEMD 2014, The 7th IET international conference on Power Electronics, Machines and Drives. London: Institution of Engineering and Technology , p. 0053/1-0053/6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  48. Published

    The impact of non-linear permeability on electromagnetic statorcore tests

    Bertenshaw, D. R. & Smith, A. C., Apr 2014, Power Electronics, Machines and Drives (PEMD 2014), 7th IETInternational Conference on. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  49. Published

    Three-dimensional finite element analysis of large electricalmachine stator core faults

    Ho, C. W., Bertenshaw, D. R., Smith, A. C., Chan, T. A. & Sasic, M., Feb 2014, In : Electric Power Applications, IET. 8, 2, p. 60-67 8 p.

    Research output: Contribution to journalArticle

  50. Published

    A study into the impact of the supply voltage on the mains supplied induction motors

    Schofield, N., Smith, A. C. & Ishfaq, A. R., 2014, IEEE 17th International Multi-Topic Conference (INMIC) Conference Proceedings. doi: 10.1109/INMIC.2014.7097379: Institute of Electrical and Electronics Engineers , p. 434-439 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  51. Published

    Advanced Algorithms for Automatic Wind Turbine Generator Fault Detection and Diagnosis

    Zappalá, D., Durovic, S., Crabtree, C. J., Vilchis-Rodriguez, D., Tavner, P. J., Djurovic, S. & Smith, S., 2014, EWEA 2014 – Scientific track proceedings. EWEA 2014 – Scientific track proceedings: EWEA, p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  52. 2013
  53. Published

    Rim-drive marine thruster using a multiple-can induction motor

    Tuohy, P. M., Smith, A. C., Husband, M. & Hopewell, P., Aug 2013, In : Electric Power Applications, IET. 7, 7, p. 557-565 9 p.

    Research output: Contribution to journalArticle

  54. Published

    Superconducting Electrical Machine

    Smith, A. C., Royce, R. & Husband, S. M., 19 Feb 2013, Patent No. US8378537(B2)

    Research output: Patent

  55. Published

    Design, build and test of an AC coil using MgB2 wire for use in a superconducting machine

    Pei, X., Smith, S., Zeng, X., Husband, M. B. & Rindfleisch, M. C., 7 Feb 2013, In : Applied Superconductivity, IEEE Transactions on. 23, 3, p. 5202605-5202605 1 p., 5202605.

    Research output: Contribution to journalArticle

  56. Published

    Analysis of wound rotor induction generator transient vibration signal under stator fault conditions

    Vilchis-Rodriguez, D., Durovic, S., Djukanović, S. & Smith, S., 2013, European Wind Energy Conference and Exhibition, EWEC 2013|Eur. Wind Energy Conf. Exhib., EWEC. http://proceedings.ewea.org/annual2013/allfiles2/931_EWEA2013presentationfinal.pdf: European Wind Energy Association, Vol. 3. p. 1930-1936 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  57. Published

    DFIG wind turbine control system co-ordination to improve drive-train reliability

    Lei, T., Barnes, M. & Smith, S., 2013, European Wind Energy Conference and Exhibition, EWEC 2013|Eur. Wind Energy Conf. Exhib., EWEC. European Wind Energy Association, Vol. 3. p. 1543-1550 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  58. Published

    Sensitivity assessment of wound rotor induction generator bearing fault detection using machine electrical quantities

    Durovic, S., Vilchis-Rodriguez, D. & Smith, S., 2013, Proceedings of the ASME Turbo Expo|Proc. ASME Turbo Expo. http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1776852: American Society of Mechanical Engineers, Vol. 8.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  59. Published

    Thermal cycling evaluation for DFIG wind turbine power converterbased on joint modelling

    Lei, T., Barnes, M. & Smith, A. C., 2013, Energy Conversion Congress and Exposition (ECCE), 2013 IEEE. p. 3845-3851 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  60. Published

    Wound rotor induction generator bearing fault modelling and detection using stator current analysis

    Vilchis-Rodriguez, D., Durovic, S. & Smith, S., 2013, In : IET Renewable Power Generation. 7, 4, p. 330-340 10 p.

    Research output: Contribution to journalArticle

  61. 2012
  62. Published

    Experimental tests on a superconducting fault current limiter using three-strand MgB 2 wire

    Pei, X., Smith, A., Husband, M. & Rindfleisch, M., 8 Nov 2012, In : IEEE Transactions on Applied Superconductivity. 22, 3, 5 p., 5600405.

    Research output: Contribution to journalArticle

  63. Published

    Experimental Testing and Modelling of a Resistive Type Superconducting Fault Current Limiter using MgB2 wire

    Smith, A. C., Oliver, A., Pei, X., Husband, M. & Rindfleisch, M., 6 Nov 2012, In : Superconductor Science & Technology. 25, 12, p. 1-9 8 p., 125018.

    Research output: Contribution to journalArticle

  64. Published

    Wire design, build and test of a superconducting machine AC stator coil using MgB2 wire

    Pei, X., Smith, A., Zeng, X., Husband, M. & Rindfleisch, M., 12 Oct 2012, Applied Superconductivity Conference, Portland, USA, 7-12 October 2012.. 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  65. Published

    Vibration monitoring for wound rotor induction machine winding fault detection

    Durovic, S., Vilchis-Rodriguez, D. & Smith, S., 1 Sep 2012, Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012|Proc. - Int. Conf. Electr. Mach., ICEM. Institute of Electrical and Electronics Engineers , p. 1906-1912 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  66. Published

    Detection of stator core faults in large electrical machines

    Bertenshaw, D. R., Smith, A. C., Ho, C. W., Chan, T. & Sasic, M., Jul 2012, In : IET Electric Power Applications. 6, 6, p. 295-301 6 p.

    Research output: Contribution to journalArticle

  67. Published

    Wind turbine induction generator fault frequency tracking by reference frame transformation

    Vilchis-Rodriguez, D. S., Durovic, S., Smith, S. & Crabtree, C. J., 1 Mar 2012, Power Electronics, Machines and Drives (PEMD 2012), 6th IET International Conference on. p. 1-6 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  68. Published

    Control of an AC brushless permanent-magnet machine using long supply cables

    Apsley, J. M., Smith, A. C. & Anastasopoulos, K., Mar 2012, Power Electronics, Machines and Drives (PEMD 2012), 6th IET International Conference on. UK: Institution of Engineering and Technology , Vol. 2012. p. B53

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  69. Published

    Cooling Arrangement for an electrical connectror for a superconductor

    Smith, A. C., Royce, R., Husband, S. M. & Harrison, S. M., 21 Feb 2012, Patent No. US 8117861 B2

    Research output: Patent

  70. Published

    Condition monitoring of wind turbine induction generators with rotor electrical asymmetry

    Durovic, S., Djurovic, S., Crabtree, C. J., Tavner, P. J. & Smith, A. C., 2012, In : IET Renewable Power Generation. 6, 4, p. 207-216 9 p.

    Research output: Contribution to journalArticle

  71. Published

    Field correlation between electromagnetic and high flux stator core tests

    Bertenshaw, D. R. & Smith, A. C., 2012, IET Conference Publications|IET Conf Publ. London: Institution of Engineering and Technology , Vol. 2012. p. P25

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  72. Published

    Wind turbine induction generator bearing fault detection using stator current analysis

    Vilchis-Rodriguez, D., Durovic, S. & Smith, S., 2012, European Wind Energy Conference and Exhibition 2012, EWEC 2012|Eur. Wind Energy Conf. Exhib., EWEC. European Wind Energy Exhibition and Conference EWEA 2012 – Scientific track Proceedings: EWEA, Vol. 1. p. 465-472 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  73. 2011
  74. Published

    Steady-state analysis of a canned line-start PM motor

    Peralta-Sanchez, E., Smith, A. C. & Rodriguez-Rivas, J. J., Oct 2011, In : Ieee Transactions on Magnetics. 47, 10, p. 4080-4083 3 p., 6027840.

    Research output: Contribution to journalArticle

  75. Published

    Editorial: Electrical systems in transportation

    Smith, S., Mar 2011, In : IET Electrical Systems in Transportation. 1, 1, p. 1-2 1 p.

    Research output: Contribution to journalEditorial

  76. Published

    Editorial: Selected papers from the power electronics, machines and drives (PEMD'10) conference

    Smith, S., 2011, In : IET Electrical Systems in Transportation. 1, 3, p. 91-92 2 p.

    Research output: Contribution to journalArticle

  77. Published

    Influence of DFIG rotor fault severity on stator current and power spectral content

    Durovic, S., Djurovic, S., Crabtree, C. J., Smith, A. C. & Tavner, P. J., 2011, European Wind Energy Conference and Exhibition 2011, EWEC 2011|Eur. Wind Energy Conf. Exhib., EWEC. p. 300-303 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  78. 2010
  79. Published

    Reduced losses in die-cast machines with insulated rotors

    Feng, Y. N., Apsley, J., Williamson, S., Smith, A. C. & Ionel, D. M., May 2010, In : IEEE Transactions on Industry Applications. 46, 3, p. 928-936 8 p., 5437178.

    Research output: Contribution to journalArticle

  80. Published

    Fault frequency tracking during transient operation of wind turbine Generators

    Durovic, S., Crabtree, C. J., Djurović, S., Tavner, P. J. & Smith, A. C., 2010, 19th International Conference on Electrical Machines, ICEM 2010|Int. Conf. Electr. Mach., ICEM.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  81. 2009
  82. Published

    Design study of doubly-fed induction generators for a 2MW wind turbine

    Todd, R., Barnes, M. & Smith, A. C., Oct 2009, In : Wind Engineering. 33, 5, p. 497-507

    Research output: Contribution to journalArticle

  83. Published

    Detection of stator core faults in large turbo-generators

    Smith, A. C., Bertenshaw, D., Ho, C. W., Chan, T. & Sasic, M., 2009, 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09|IEEE Int. Electr. Mach. Drives Conf., IEMDC. USA: Institute of Electrical and Electronics Engineers , p. 763-770 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  84. Published

    Propulsion drive models for full electric marine propulsion systems

    Apsley, J. M., González-Villaseñor, A., Barnes, M., Smith, A. C., Williamson, S., Schuddebeurs, J. D., Norman, P. J., Booth, C. D., Burt, G. M. & McDonald, J. R., 2009, In : IEEE Transactions on Industry Applications. 45, 2, p. 676-684 8 p.

    Research output: Contribution to journalArticle

  85. Published

    Reduced losses in Die-cast machines with insulated rotors

    Feng, Y. N., Apsley, J., Williamson, S., Smith, A. C. & Ionel, D. M., 2009, 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09|IEEE Int. Electr. Mach. Drives Conf., IEMDC. p. 57-64 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  86. 2007
  87. Published

    Modelling and analysis of electro-mechanical interactions between prime-mover and load in a marine IFEP system

    Elders, I. M., Norman, P. J., Schuddebeurs, J. D., Booth, C. D., Burt, G. M., McDonald, J. R., Apsley, J., Barnes, M., Smith, A., Williamson, S., Loddick, S. & Myers, I., 2007, IEEE Electric Ship Technologies Symposium, ESTS 2007|IEEE Electr. Ship Technol. Symp.. p. 77-84 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  88. Published

    Propulsion drive models for full electric marine propulsion systems

    Apsley, J. M., Villasenor, A. G., Barnes, M., Smith, A. C., Williamson, S., Schuddebeurs, J. D., Norman, P. J., Booth, C. D., Burt, G. M. & McDonald, J. R., 2007, Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007|Proc. IEEE Int. Elec. Mach. Drives Conf.. Vol. 1. p. 118-123 5 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  89. 2006
  90. Published

    Improved energy conversion for doubly fed wind generators

    Smith, A. C., Todd, R., Barnes, M. & Tavner, P. J., Nov 2006, In : IEEE Transactions on Industry Applications. 42, 6, p. 1421-1428

    Research output: Contribution to journalArticle

  91. Published

    Induction motor performance as a function of phase number

    Apsley, J. M., Williamson, S., Smith, A. C. & Barnes, M., 2006, In : IEE Proceedings: Electric Power Applications. 153, 6, p. 898-904 6 p.

    Research output: Contribution to journalArticle

  92. 2005
  93. Published

    Improved energy conversion for doubly-fed wind generators

    Smith, S., Todd, R., Barnes, M. & Tavner, P. J., 2005, Conference Record - IAS Annual Meeting (IEEE Industry Applications Society)|Conf Rec IAS Annu Meet. Vol. 4. p. 2288-2295

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  94. 2004
  95. Published

    Estimation of the inter-bar resistance of a cast cage rotor

    Williamson, S., Poh, C. Y. & Smith, A. C. S., Mar 2004, In : IEEE Transactions on Industry Applications. 40, 2, p. 558-564 6 p.

    Research output: Contribution to journalArticle

  96. 2003
  97. Published

    Pulsating Torque and Losses in Multiphase Induction Machines

    Williamson, S. & Smith, S., Jul 2003, In : IEEE Transactions on Industry Applications. 39, 4, p. 986-993 7 p.

    Research output: Contribution to journalArticle

  98. 2002
  99. Published

    Equivalent circuits for cage induction motors with inter-bar currents

    Williamson, S. & Smith, A. C., May 2002, In : IEE Proceedings: Electric Power Applications. 149, 3, p. 173-183 10 p.

    Research output: Contribution to journalArticle

  100. 1996
  101. Published

    Performance of line-start single phase permanent magnet motors for domestic applications

    Smith, A. C. & Wong, A. K. B., 1996, In : Industry Applications Society. IEEE - IAS Annual Meeting. Conference Record. 1, p. 503-510 8 p.

    Research output: Contribution to journalArticle

  102. 1994
  103. Published

    Improved rotor models for vector controllers

    Healey, R. C., Williamson, S. & Smith, A. C., 1994, In : Industry Applications Society. IEEE - IAS Annual Meeting. Conference Record. 1, p. 575-584 10 p.

    Research output: Contribution to journalArticle

  104. 1989
  105. Published

    Harmonic field analysis for slip-ring motors including general rotor asymmetry

    Smith, A. C., 1989, p. 31-37.

    Research output: Contribution to conferenceOther

  106. 1983
  107. Published

    THERMAL CHARACTERISTICS OF INDUCTION MACHINES.

    Williamson, S., Ralph, J. W., Smith, A. C. & Smith, J. R., 1983, p. 6. 1-6. 3.

    Research output: Contribution to conferenceOther

Research Explorer downloads

846

Research output: Contribution to journalArticle

480

Research output: Contribution to journalArticle

304

Research output: Contribution to journalArticle

164

Research output: Contribution to journalArticle