The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loadingCitation formats

Standard

The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading. / Millett, J. C F; Whiteman, G.; Bourne, N. K.; Gray, G. T.

In: Journal of Applied Physics, Vol. 104, No. 7, 073531, 2008.

Research output: Contribution to journalArticle

Harvard

Millett, JCF, Whiteman, G, Bourne, NK & Gray, GT 2008, 'The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading', Journal of Applied Physics, vol. 104, no. 7, 073531. https://doi.org/10.1063/1.2991164

APA

Millett, J. C. F., Whiteman, G., Bourne, N. K., & Gray, G. T. (2008). The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading. Journal of Applied Physics, 104(7), [073531]. https://doi.org/10.1063/1.2991164

Vancouver

Author

Millett, J. C F ; Whiteman, G. ; Bourne, N. K. ; Gray, G. T. / The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading. In: Journal of Applied Physics. 2008 ; Vol. 104, No. 7.

Bibtex

@article{9197aa664a7c48daa1b0bdd6a95ec9af,
title = "The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading",
abstract = "Manganin stress gauges in lateral orientation have been used to monitor the shock response of Ti-6Al-4V when loaded either parallel to or radial to the long axis of the original bar stock studied in this investigation. Materials characterization has shown that the c -axis of the hexagonal unit cell is preferentially orientated radially to the axis of the bar. Shear strengths measured along the long axis of the bar were found to be in agreement with previous data in the literature, while strength in the radial direction was found to be significantly lower. It was also noted that the lateral stress, when measured in the radial direction, displayed a pronounced drop in the lateral stress after reaching the peak shock stress unlike the longitudinal orientation. This decrease is indicative of an increase in shear strength behind the shock front. In both instances, it is postulated that extensive deformation twinning during the early stages of deformation in the shock and thereafter c+a slip and dislocation tangling builds up over a longer time period, resulting in the higher degree of hardening noted. {\circledC} 2008 Crown Copyright.",
author = "Millett, {J. C F} and G. Whiteman and Bourne, {N. K.} and Gray, {G. T.}",
note = "Times Cited: 10",
year = "2008",
doi = "10.1063/1.2991164",
language = "English",
volume = "104",
journal = "Journal of Applied Physics",
issn = "0021-8979",
publisher = "American Institute of Physics",
number = "7",

}

RIS

TY - JOUR

T1 - The role of anisotropy in the response of the titanium alloy Ti-6Al-4V to shock loading

AU - Millett, J. C F

AU - Whiteman, G.

AU - Bourne, N. K.

AU - Gray, G. T.

N1 - Times Cited: 10

PY - 2008

Y1 - 2008

N2 - Manganin stress gauges in lateral orientation have been used to monitor the shock response of Ti-6Al-4V when loaded either parallel to or radial to the long axis of the original bar stock studied in this investigation. Materials characterization has shown that the c -axis of the hexagonal unit cell is preferentially orientated radially to the axis of the bar. Shear strengths measured along the long axis of the bar were found to be in agreement with previous data in the literature, while strength in the radial direction was found to be significantly lower. It was also noted that the lateral stress, when measured in the radial direction, displayed a pronounced drop in the lateral stress after reaching the peak shock stress unlike the longitudinal orientation. This decrease is indicative of an increase in shear strength behind the shock front. In both instances, it is postulated that extensive deformation twinning during the early stages of deformation in the shock and thereafter c+a slip and dislocation tangling builds up over a longer time period, resulting in the higher degree of hardening noted. © 2008 Crown Copyright.

AB - Manganin stress gauges in lateral orientation have been used to monitor the shock response of Ti-6Al-4V when loaded either parallel to or radial to the long axis of the original bar stock studied in this investigation. Materials characterization has shown that the c -axis of the hexagonal unit cell is preferentially orientated radially to the axis of the bar. Shear strengths measured along the long axis of the bar were found to be in agreement with previous data in the literature, while strength in the radial direction was found to be significantly lower. It was also noted that the lateral stress, when measured in the radial direction, displayed a pronounced drop in the lateral stress after reaching the peak shock stress unlike the longitudinal orientation. This decrease is indicative of an increase in shear strength behind the shock front. In both instances, it is postulated that extensive deformation twinning during the early stages of deformation in the shock and thereafter c+a slip and dislocation tangling builds up over a longer time period, resulting in the higher degree of hardening noted. © 2008 Crown Copyright.

U2 - 10.1063/1.2991164

DO - 10.1063/1.2991164

M3 - Article

VL - 104

JO - Journal of Applied Physics

JF - Journal of Applied Physics

SN - 0021-8979

IS - 7

M1 - 073531

ER -