Publications

  1. 2020
  2. E-pub ahead of print

    Exact solutions for rectangular anisotropic plates with four clamped edges

    Xu, Y. & Wu, Z., 13 Nov 2020, In: Mechanics of Advanced Materials and Structures.

    Research output: Contribution to journalArticlepeer-review

  3. E-pub ahead of print

    Fatigue behaviour and design of corroded reinforced concrete beams intervened by ICCP-SS

    Su, M., Wei, L., Liang, H., Zhu, J., Ueda, T. & Xing, F., 9 Nov 2020, In: Composite Structures. p. 113295

    Research output: Contribution to journalArticlepeer-review

  4. E-pub ahead of print

    Numerical investigation and design of aluminium alloy channel section columns at elevated temperatures

    Zhu, J., Li, Z. & Su, M-N., 3 Nov 2020, In: Thin-Walled Structures. p. 107225

    Research output: Contribution to journalArticlepeer-review

  5. Published

    Elastic Response of Cross-Laminated Timber Panels using Finite Element and Analytical Techniques

    Albostami, A., Wu, Z. & Cunningham, L., 1 Nov 2020, In: Canadian Journal of Civil Engineering.

    Research output: Contribution to journalArticlepeer-review

  6. Published

    The Influence of Multiaxial Stress Relaxation on Component Creep Damage Accumulation in Biaxial, Mixed Primary and Secondary Loading on a Pipe

    Matev, N., Ainsworth, R., Su, M., Stevens, M. & Jappy, A., 28 Oct 2020, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  7. E-pub ahead of print

    Effect of using recycled waste glass coarse aggregates on the hydrodynamic abrasion resistance of concrete

    Omoding, N., Cunningham, L. & Lane-Serff, G. F., 21 Oct 2020, In: Construction and Building Materials.

    Research output: Contribution to journalArticlepeer-review

  8. E-pub ahead of print

    Direct strength method for cold-formed steel beams with non-uniform temperatures

    Alabi-bello, M., Wang, Y. & Su, M., 8 Oct 2020, In: Institution of Civil Engineers. Proceedings. Structures and Buildings. p. 1-18

    Research output: Contribution to journalArticlepeer-review

  9. Published

    Experimental and numerical investigation of mortar and ITZ parameters in meso-scale models of concrete

    Wang, J., Jivkov, A., Li, Q. & Engelberg, D., 1 Oct 2020, In: Theoretical and Applied Fracture Mechanics. 109, 102722.

    Research output: Contribution to journalArticlepeer-review

  10. Published

    Modeling of galvanized lattice steel structures incorporating the effect of joint slip

    Zhan, Y., Li, B., Wu, Z., Cunningham, L., Wu, G. & Yang, Y., 1 Oct 2020, In: Journal of Constructional Steel Research. 173, p. 1-11

    Research output: Contribution to journalArticlepeer-review

  11. E-pub ahead of print

    Mitigation of physical aging with mixed matrix membranes based on crosslinked PIM-1 fillers and PIM-1

    Tamaddondar, M., Foster, A. B., Carta, M., Gorgojo, P., Mckeown, N. B. & Budd, P. M., 9 Sep 2020, In: ACS applied materials & interfaces.

    Research output: Contribution to journalArticlepeer-review

  12. Published

    Advanced lattice material with high energy absorption based on topology optimisation

    Yang, C. & Li, Q., 1 Sep 2020, In: Mechanics of Materials. 103536

    Research output: Contribution to journalArticlepeer-review

  13. Accepted/In press

    Behaviour of Concrete-filled Cold-formed High Strength Steel Circular Stub Columns

    Su, M., Cai, Y., Chen, X. & Young, B., 16 Aug 2020, (Accepted/In press) In: Thin-Walled Structures.

    Research output: Contribution to journalArticlepeer-review

  14. E-pub ahead of print

    Finite element modelling and design of steel plate shear wall buckling-restrained by hat-section cold-formed steel members

    Tan, J., Gu, C., Su, M., Wang, Y., Wang, K., Shi, Y., Lan, Y., Luo, W., Deng, X., Bai, Y. & Chen, Q., 11 Aug 2020, In: Journal of Constructional Steel Research. 174, p. 106274

    Research output: Contribution to journalArticlepeer-review

  15. Published

    Organic Semiconductors Processed from Synthesis-to-Device in Water

    Rahmanudin, A., Marcial Hernández, R., Zamhuri, A., Walton, A., Tate, D., Khan, R., Aphichatpanichakul, S., Foster, A., Broll, S. & Turner, M., 11 Aug 2020, In: Advanced Science.

    Research output: Contribution to journalArticlepeer-review

  16. E-pub ahead of print

    A numerical investigation into stripping failure of bolt assemblies at elevated temperatures

    Shaheen, M., Foster, A., Cunningham, L. & Afshan, S., 1 Aug 2020, In: Structures. 27, p. 1458-1466 7 p.

    Research output: Contribution to journalArticlepeer-review

  17. Published

    Seismic behaviour of concrete-filled steel tubular columns with internal H-section steel under pure torsion and compression–torsion loads

    Pi, Z., Su, M., Peng, Y., Wang, Y., Luo, W. & Lan, Y., 1 Aug 2020, In: Engineering Structures. 216, p. 110761

    Research output: Contribution to journalArticlepeer-review

  18. Published

    Metric of Shock Severity

    Yan, Y. & Li, Q., 29 Jul 2020, In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 476, 2239

    Research output: Contribution to journalArticlepeer-review

  19. Published

    In-plane Strengthening of Existing Masonry Walls using Plant-derived Textile

    Tian, Y. & Cunningham, L., 24 Jul 2020, In: Masonry International. 33, 1, p. 27-35

    Research output: Contribution to journalArticlepeer-review

  20. E-pub ahead of print

    Fire Safety Assessment of Epoxy Composites Reinforced by Carbon Fibre and Graphene

    Zhang, Q., Wang, Y. C., Soutis, C., Bailey, C. G. & Hu, Y., 14 Jul 2020, In: Applied Composite Materials.

    Research output: Contribution to journalArticlepeer-review

  21. Accepted/In press

    Design and implementation of net zero displacement filter for the synthesis of a mechanical shock signal under specified shock response spectrum

    Yan, Y. & Li, Q., 27 Jun 2020, (Accepted/In press) In: Mechanical Systems and Signal Processing.

    Research output: Contribution to journalArticlepeer-review

  22. Published

    Behaviour of Axially and Rotationally Restrained Reinforced Concrete Beams in Fire

    Albrifkani, S. & Wang, Y., 15 Jun 2020, In: Engineering Structures. 213, 110572.

    Research output: Contribution to journalArticlepeer-review

  23. Accepted/In press

    Post-earthquake fire performance of square concrete-filled steel tube columns

    Wang, Y-H., Tang, Q., Su, M., Tan, J-K., Wang, W-Y., Lan, Y-S., Luo, W. & Zhou, Y., 26 May 2020, (Accepted/In press) In: Thin-Walled Structures.

    Research output: Contribution to journalArticlepeer-review

  24. Published

    Dual damage criteria in a crash stop

    Yang, C. & Li, Q. M., 25 May 2020, In: International Journal of Mechanical Sciences. 183, p. 1-13 13 p., 105732.

    Research output: Contribution to journalArticlepeer-review

  25. Published

    Discussion of “Slenderness Effects in Circular RC Columns Strengthened with CFRP Sheets Using Different External Bonding Techniques” by Masood NoroozOlyaee and Davood Mostofinejad

    Zhan, Y., Li, B. & Wu, Z., 22 May 2020, In: Journal of Composites for Construction. 24, 4, 2 p., 07020005.

    Research output: Contribution to journalArticlepeer-review

  26. E-pub ahead of print

    Multiscale image-based modelling of damage and fracture in carbon fibre reinforced polymer composites

    Sencu, R. M., Zhang, J., Wang, Y., Withers, P. & Soutis, C., 22 May 2020, In: Composites Science and Technology.

    Research output: Contribution to journalArticlepeer-review

  27. Accepted/In press

    Synergistic Effects of a Novel Method of Preparing Graphene/Polyvinyl Alcohol to Modify Cementitious Material

    Pei, C., Zhou, X., Zhu, J-H., Su, M., Wang, Y. & Xing, F., 18 May 2020, (Accepted/In press) In: Construction and Building Materials.

    Research output: Contribution to journalArticlepeer-review

  28. Published

    A new method for calculating hot-spot stress in gap DKK CHS joints under arbitrary loading

    Oshogbunu, E., Wang, Y. & Stallard, T., 1 May 2020, In: Engineering Structures. 210, 110366.

    Research output: Contribution to journalArticlepeer-review

  29. Published

    Review of Concrete Resistance to Abrasion by Waterborne Solids

    Omoding, N., Cunningham, L. & Lane-Serff, G. F., 1 May 2020, In: ACI Materials Journal. 117, 3, p. 41-52

    Research output: Contribution to journalReview articlepeer-review

  30. Published

    Design of Aluminum Alloy Channel Section Beams

    Zhu, J-H., Li, Z., Su, M. & Young, B., May 2020, In: Journal of Structural Engineering.

    Research output: Contribution to journalArticlepeer-review

  31. E-pub ahead of print

    Influence of loading ratio on flat slab connections at elevated temperature: A numerical study

    Al Hamd, R., Gillie, M., Mohamad, S. A. & Cunningham, L., 20 Apr 2020, In: Frontiers of Structural and Civil Engineering. p. 1 14 p.

    Research output: Contribution to journalArticlepeer-review

  32. E-pub ahead of print

    Experimental Study on the Mechanical Properties of Straw-fibre Reinforced Adobe Masonry

    Abdulla, K., Cunningham, L. & Gillie, M., 19 Apr 2020, In: Journal of Materials in Civil Engineering. 32, 11, p. 1-15 15 p.

    Research output: Contribution to journalArticlepeer-review

  33. Accepted/In press

    A method for evaluating the bond behavior and anchorage length of embedded carbon yarn in the cementitious matrix

    Zhu, M., Zhu, J-H., Ueda, T., Su, M. & Xing, F., 5 Apr 2020, (Accepted/In press) In: Construction and Building Materials.

    Research output: Contribution to journalArticlepeer-review

  34. E-pub ahead of print

    Using soft polymer template engineering of mesoporous TiO2 scaffolds to increase perovskite grain size and solar cell efficiency

    Lian, Q., Mokhtar, M. Z., Lu, D., Zhu, M., Jacobs, J., Foster, A. B., Thomas, A. G., Spencer, B. F., Wu, S., Liu, C., Hodson, N., Smith, B., Alkaltham, A., Alkhudhari, O., Watson, T. M. & Saunders, B. R., 2 Apr 2020, In: ACS applied materials & interfaces.

    Research output: Contribution to journalArticlepeer-review

  35. E-pub ahead of print

    Behaviour of stainless and high strength steel bolt assemblies at elevated temperatures - a review

    Shaheen, M., Foster, A., Cunningham, L. & Afshan, S., 2 Mar 2020, In: Fire Safety Journal.

    Research output: Contribution to journalReview articlepeer-review

  36. Published

    Developing advanced techniques to reclaim existing end of service life (EoSL) bricks – an assessment of reuse technical viability

    Zhou, K., Chen, H-M., Wang, Y., Lam, D., Ajayebi, A. & Hopkinson, P., 14 Feb 2020, In: Developments in the Built Environment. 2, 100006.

    Research output: Contribution to journalArticlepeer-review

  37. Published

    Deformation and failure behaviors of anode in lithium-ion batteries: Model and mechanism

    Wang, L., Duan, X., Liu, B., Li, Q. M., Yin, S. & Xu, J., 1 Feb 2020, In: Journal of Power Sources. 448, 227468.

    Research output: Contribution to journalArticlepeer-review

  38. Published

    Modelling progressive failure of steel moment frames exposed to localised fire: The 3rd International Conference on Eco Engineering Development 13–14 November 2019, Solo, Indonesia

    Suwondo, R., Cunningham, L. & Gillie, M., 1 Feb 2020, IOP Conference Series: Earth and Environmental Science: The 3rd International Conference on Eco Engineering Development 13–14 November 2019, Solo, Indonesia. IOP Publishing Ltd, Vol. 426. p. 1-6

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  39. Published

    A general shock waveform and characterisation method

    Yan, Y. & Li, Q. M., Feb 2020, In: Mechanical Systems and Signal Processing. 136, 106508.

    Research output: Contribution to journalArticlepeer-review

  40. Published

    An experimental study of the effects of topcoat on aging and fire protection properties of intumescent coatings for steel elements

    Wang, L. L., Wang, Y., Li, G. Q. & Zhang, QQ., Feb 2020, In: Fire Safety Journal. 111, 102931.

    Research output: Contribution to journalArticlepeer-review

  41. Published

    Effective waveform representation of responsive signals initiated by impulsive actions in physical and engineering systems

    Yan, Y. & Li, Q. M., Feb 2020, In: International Journal of Engineering Science. 147, 103199.

    Research output: Contribution to journalArticlepeer-review

  42. E-pub ahead of print

    C-FRCM Jacket Confinement for RC Columns under Impressed Current Cathodic Protection

    Zhu, J., Wang, Z., Su, M., Ueda, T. & Xing, F., 7 Jan 2020, In: Journal of Composites for Construction. 24, 2, p. 04020001

    Research output: Contribution to journalArticlepeer-review

  43. Published

    Understanding the Topology of the Polymer of Intrinsic Microporosity PIM-1: Cyclics, Tadpoles, and Network Structures and Their Impact on Membrane Performance

    Foster, A., Tamaddondar, M., Luque-Alled, J., Harrison, W., Li, Z., Gorgojo, P. & Budd, P., 7 Jan 2020, In: Macromolecules. 53, p. 569-583 15 p.

    Research output: Contribution to journalArticlepeer-review

  44. Published

    Anodic and Mechanical Behavior of Carbon Fiber Reinforced Polymer as a Dual-Functional Material in Chloride-Contaminated Concrete

    Wei, L., Zhu, J., Dong, Z., Liu, J., Liu, W., Su, M. & Xing, F., 4 Jan 2020, In: Materials. 13, 1, p. 222

    Research output: Contribution to journalArticlepeer-review

  45. Published

    Structural optimisation for the collapse zone of a railway vehicle

    Yang, C. & Li, Q. M., 1 Jan 2020, In: International Journal of Mechanical Sciences. 165, 105201.

    Research output: Contribution to journalArticlepeer-review

  46. Published

    Porosity variation of lithium-ion battery separators under uniaxial tension

    Wang, Y., Li, Q. & Xing, Y., Jan 2020, In: International Journal of Mechanical Sciences.

    Research output: Contribution to journalArticlepeer-review

  47. Published

    Fire safety design of open plan apartments in England

    Hopkin, C., Spearpoint, M., Hopkin, D. & Wang, Y., 2020, In: Architectural Engineering and Design Management.

    Research output: Contribution to journalArticlepeer-review

  48. Published

    Intrinsically Microporous Polymer Nanosheets for High Performance Gas Separation Membranes

    Tamaddondar, M., Foster, A., Luque-Alled, J., Msayib, K. J., Carta, M., Sorribas, S., Gorgojo, P., Mckeown, N. B. & Budd, P., 2020, In: Macromolecular rapid communications. 41, 2, p. 1-8 8 p., 1900572.

    Research output: Contribution to journalArticlepeer-review

  49. 2019
  50. Published

    Design Fire Characteristics for Probabilistic Assessments of Dwellings in England

    Hopkin, C., Spearpoint, M., Wang, Y. & Hopkin, D., 11 Nov 2019, In: Fire Technology.

    Research output: Contribution to journalArticlepeer-review

  51. E-pub ahead of print

    Tensile behaviour of carbon fabric reinforced cementitious matrix composites as both strengthening and anode materials

    Wei, L., Zhu, J., Ueda, T., Su, M., Liu, J., Liu, W., Tang, L. & Xing, F., 5 Nov 2019, In: Composite Structures. 234, p. 111675

    Research output: Contribution to journalArticlepeer-review

  52. E-pub ahead of print

    Flexural performance of corroded continuous RC beams rehabilitated by ICCP-SS

    Su, M., Zeng, C., Li, W., Zhu, J., Lin, W., Ueda, T. & Xing, F., 11 Oct 2019, In: Composite Structures. 232, p. 111556

    Research output: Contribution to journalArticlepeer-review

  53. E-pub ahead of print

    Compressive behaviour of built-up hot-rolled steel hollow and composite sections

    Tan, J., Wang, Y., Su, M., Zhang, H. & Peng, Y., 13 Aug 2019, In: Engineering Structures. 198, p. 109528

    Research output: Contribution to journalArticlepeer-review

  54. E-pub ahead of print

    Sustainable recycling of intact carbon fibres from end-of-service-life composites

    Chen, P., Pei, C., Zhu, J., Su, M. & Xing, F., 13 Aug 2019, In: Green Chemistry. 21, 17, p. 4757-4768

    Research output: Contribution to journalArticlepeer-review

  55. Published

    Further assessment of deceleration-time histories for occupant injury and the damage of protected object in a crash stop

    Yang, C. & Li, Q. M., Aug 2019, In: International Journal of Impact Engineering. 130, p. 184-191 8 p.

    Research output: Contribution to journalArticlepeer-review

  56. Published

    Numerical study of full-scale CFRP strengthened open-section steel columns under transverse impact

    Kadhim, M. M. A., Wu, Z. & Cunningham, L. S., 1 Jul 2019, In: Thin-Walled Structures. 140, p. 99-113

    Research output: Contribution to journalArticlepeer-review

  57. Published

    Ballistic response of hexagonal boron nitride monolayer under impact of a nano-projectile

    Tian, H., Zhang, B. & Li, Q., Jun 2019, In: Mechanics of Materials. 133, p. 1-12

    Research output: Contribution to journalArticlepeer-review

  58. E-pub ahead of print

    Modelling shore-side pressure distributions from violent wave breaking at a seawall

    Baines, A., Cunningham, L., Rogers, B. D. & Watson, P., 29 May 2019, In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics.

    Research output: Contribution to journalArticlepeer-review

  59. Published

    Performance evaluation of demountable shear connectors with collar step at ambient and elevated temperatures

    Sencu, R. M., Wang, Y. C., Yang, J. & Lam, D., 25 May 2019, In: Engineering Structures. 194, p. 94-105

    Research output: Contribution to journalArticlepeer-review

  60. Published

    Cutting-induced end surface effect on compressive behaviour of aluminium foams

    Meng, K., Chai, C. G., Sun, Y., Wang, W., Wang, Q. & Li, Q. M., 1 May 2019, In: European Journal of Mechanics, A/Solids. 75, p. 410-418

    Research output: Contribution to journalArticlepeer-review

  61. Published

    Recovery and Re-Use of Structural Products from End of Life Buildings

    Hopkinson, P., Chen, H-M., Zhou, K., Wang, Y. & Lam, D., May 2019, In: Institution of Civil Engineers. Proceedings. Engineering Sustainability. 1800007.

    Research output: Contribution to journalArticlepeer-review

  62. Published

    Experimental Study on the Shear Performance of Reinforced Concrete Beams Strengthened with Bolted Side-Plating

    Liu, X., Chen, Y., Li, L., Su, M., Lu, Z. & Yu, K., 26 Apr 2019, In: Sustainability. 11, 9, p. 2465

    Research output: Contribution to journalArticlepeer-review

  63. Published

    Collapse of Particle-Laden Buoyant Plumes

    Apsley, D. & Lane-Serff, G. F., 25 Apr 2019, In: Journal of Fluid Mechanics. 865, p. 904-927 23 p.

    Research output: Contribution to journalArticlepeer-review

  64. Published

    A solution for sea-sand reinforced concrete beams

    Su, M., Wei, L., Zeng, Z., Ueda, T., Xing, F. & Zhu, J., 20 Apr 2019, In: Construction and Building Materials. 204, p. 586-596

    Research output: Contribution to journalArticlepeer-review

  65. Published

    Evaluation of carbon fiber reinforced cementitious matrix as a recyclable strengthening material

    Li, W., Zhu, J., Chen, P., Xing, F., Li, D. & Su, M., 20 Apr 2019, In: Journal of Cleaner Production. 217, p. 234-243

    Research output: Contribution to journalArticlepeer-review

  66. E-pub ahead of print

    Design of aluminium alloy beams at elevated temperatures

    Su, M., Zhang, Y. & Young, B., 11 Apr 2019, In: Thin-Walled Structures. 140, p. 506-515

    Research output: Contribution to journalArticlepeer-review

  67. Published

    Material properties of normal and high strength aluminium alloys at elevated temperatures

    Su, M. & Young, B., 1 Apr 2019, In: Thin-Walled Structures. 137, p. 463-471

    Research output: Contribution to journalArticlepeer-review

  68. Published

    Practical Application of CFRP Strengthening to Steel Floor Beams with Web Openings: A numerical Investigation

    Altaee, M., Cunningham, L. S. & Gillie, M., Apr 2019, In: Journal of Constructional Steel Research. 155, p. 395-408

    Research output: Contribution to journalArticlepeer-review

  69. E-pub ahead of print

    Numerical study and design of aluminium alloy channel section columns with welds

    Zhu, J., Li, Z., Su, M. & Young, B., 9 Mar 2019, In: Thin-Walled Structures. 139, p. 139-150

    Research output: Contribution to journalArticlepeer-review

  70. Published

    Novel shearhead reinforcement for slab-column connections subject to eccentric load and fire

    Al Hamd, R., Gillie, M., Cunningham, L., Warren, H. & Albostami, A., Mar 2019, In: Archives of Civil and Mechanical Engineering. 19, 2, p. 503-524 21 p.

    Research output: Contribution to journalArticlepeer-review

  71. Published

    Reliability analysis of intumescent coating protected steel members under the standard fire condition

    Inerhunwa, I., Chang Wang, Y. & Su, M., Mar 2019, In: Fire Safety Journal.

    Research output: Contribution to journalArticlepeer-review

  72. Published

    Low-pass-filter-based shock response spectrum and the evaluation method of transmissibility between equipment and sensitive components interfaces

    Yan, Y. & Li, Q., 15 Feb 2019, In: Mechanical Systems and Signal Processing. 117, p. 97-115

    Research output: Contribution to journalArticlepeer-review

  73. Published

    Progressive collapse analysis of composite steel frames subject to fire following earthquake

    Suwondo, R., Cunningham, L., Gillie, M. & Bailey, C., Jan 2019, In: Fire Safety Journal. 103, p. 49-58

    Research output: Contribution to journalArticlepeer-review

  74. Published

    An experimental study to assess the feasibility of a three stage thermal conductivity model for intumescent coatings in large space fires

    Han, J., Li, G. Q., Wang, Y. & Xu, Q., 2019, In: Fire Safety Journal. 102860.

    Research output: Contribution to journalArticlepeer-review

  75. Published

    Assessment of Cross-Laminated Timber Panels by the State Space Approach

    Albostami, A., Wu, J. & Cunningham, L., 2019, In: Advances in Structural Engineering.

    Research output: Contribution to journalArticlepeer-review

  76. Published

    Bending and shear behaviour of two layer beams with one layer of rubber recycled aggregate concrete in tension

    Ataria, R. & Wang, Y., 2019, In: Structures. p. 214 25 p., 20.

    Research output: Contribution to journalArticlepeer-review

  77. Published

    Combined Impressed Current Cathodic Protection and FRCM Strengthening for Corrosion-Prone Concrete Structures

    Su, M-N., Wei, L., Zhu, J-H., Ueda, T., Guo, G-P. & Xing, F., 2019, In: Journal of Composites for Construction.

    Research output: Contribution to journalArticlepeer-review

  78. Published

    Comparative behaviour of ‘I beam- RHS column’ joints with and without web weld

    Serrano, M., Carlos, P., Wang, Y., Garcia, M. & Fernando, G., 2019, In: Journal of Constructional Steel Research. 159, p. 330 340 p.

    Research output: Contribution to journalArticlepeer-review

  79. Published

    Effective Thickness Design Methods for Lateral-Torsional Buckling of Laminated Glass

    Riddell-smith, L., Mandal, P. & Cunningham, L., 2019, In: Journal of Structural Engineering. 145, 12, p. 06019002

    Research output: Contribution to journalArticlepeer-review

  80. Published

    Experimental and numerical investigation of CFRP strengthened steel beams under impact load

    Kadhim, M. M. A., Wu, J. & Cunningham, L., 2019, In: Journal of Structural Engineering.

    Research output: Contribution to journalArticlepeer-review

  81. Published

    Experimental study on seismic performance of post-fire reinforced concrete frames

    Su, M-N. & Xia, M., 2019, In: Engineering Structures.

    Research output: Contribution to journalArticlepeer-review

  82. Published

    Internal door closing habits in domestic premises: Results of a survey and the potential implications on fire safety

    Hopkin, C., Spearpoint, M. & Wang, Y., 2019, In: Safety Science. 120, p. 44-56

    Research output: Contribution to journalArticlepeer-review

  83. Published

    Numerical Investigation of Static Resistance of Welded Planar Steel Tubular Joints Under In-plane and Out-of-plane Bending at Elevated Temperatures

    Ozyurt, E. & Wang, Y., 2019, In: Engineering Structures. 199, 109622.

    Research output: Contribution to journalArticlepeer-review

  84. Published

    Quantification of gas permeability of epoxy resin composites with graphene nanoplatelets

    Zhang, Q., Wang, Y., Bailey, C., Istrate, O., Li, Z., Kinloch, I. & Budd, P., 2019, In: Composites Science and Technology. 184, 107875.

    Research output: Contribution to journalArticlepeer-review

  85. Published

    Recycling of carbon fibre reinforced plastics by electrically driven heterogeneous catalytic degradation of epoxy resin

    Zhu, J., Chen, P., Su, M., Pei, C. & Xing, F., 2019, In: Green Chemistry.

    Research output: Contribution to journalArticlepeer-review

  86. Published

    Residential occupant density distributions derived from English Housing Survey data

    Hopkin, C., Spearpoint, M., Hopkin, D. & Wang, Y., 2019, In: Fire Safety Journal.

    Research output: Contribution to journalArticlepeer-review

  87. Published

    Synergistic enhancement of gas selectivity in thin film composite membranes of PIM-1

    Borisov, I. L., Bakhtin, D. S., Luque-alled, J. M., Rybakova, A., Makarova, V., Foster, A. B., Harrison, W., Volkov, V. V., Polevaya, V., Gorgojo, P., Prestat, E., Budd, P. M. & Volkov, A. V., 2019, In: Journal of Materials Chemistry A.

    Research output: Contribution to journalArticlepeer-review

  88. Published

    The influence of multiaxial stress relaxation on component creep damage accumulation

    Matev, N., Ainsworth, R. A., Su, M., Stevens, M. & Jappy, A., 2019, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  89. 2018
  90. Published

    Drag on pairs of square section obstacles in free-surface flows

    Robertson, F. & Lane-Serff, G. F., 18 Dec 2018, In: Physical Review Fluids.

    Research output: Contribution to journalArticlepeer-review

  91. Published

    Experimental investigation of the performance of demountable composite beam shear connectors at ambient & elevated temperatures

    Sencu, R. M. & Wang, Y., 7 Dec 2018, Proceedings of the Ninth International Conference on Advances in Steel Structures (ICASS’2018).

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  92. Published

    Improving the performance of composite floors subjected to post-earthquake fire

    Suwondo, R., Cunningham, L., Gillie, M. & Bailey, C., Dec 2018, In: Fire Safety Journal.

    Research output: Contribution to journalArticlepeer-review

  93. E-pub ahead of print

    Behaviour of aluminium alloy plain and lipped channel columns

    Zhu, J., Li, Z., Su, M. & Young, B., 26 Nov 2018, In: Thin-Walled Structures. 135, p. 306-316

    Research output: Contribution to journalArticlepeer-review

  94. E-pub ahead of print

    Experimental study on seismic performance of post-fibre reinforced concrete frames

    Li, L-Z., Liu, X., Yu, J-T., Lu, Z-D., Su, M., Liao, J-H. & Xia, M., 2 Nov 2018, In: Engineering Structures.

    Research output: Contribution to journalArticlepeer-review

  95. Published

    Cyclic behaviour of double-tube buckling-restrained braces for boiler steel plant structures

    Xu, F., Chen, J., Shu, K. & Su, M., 1 Nov 2018, In: Journal of Constructional Steel Research. 150, p. 556-569 14 p.

    Research output: Contribution to journalArticlepeer-review

  96. Published

    Composite Structures of Steel and Concrete: Fire Resistance

    Wang, Y., Nov 2018, Composite Structures of Steel and Concrete. Johnson, R. (ed.). 4 ed. Chichester: John Wiley & Sons Ltd, p. 223-245 23 p.

    Research output: Chapter in Book/Report/Conference proceedingChapter

  97. Published

    Experimental study of the influence of topcoat on insulation performance of intumescent coatings for steel structures

    Xu, Q., Li, G., Jiang, J. & Wang, Y., Oct 2018, In: Fire Safety Journal. p. 25-38 14 p.

    Research output: Contribution to journalArticlepeer-review

  98. Published

    Quantifying effects of graphene nanoplatelets on slowing down combustion of epoxy composites

    Zhang, Q., Wang, Y., Bailey, C., Yuen, R. K. K., Parkin, J. & Valles, C., 1 Aug 2018, In: Composites. Part B: Engineering. 146, p. 76-87

    Research output: Contribution to journalArticlepeer-review

  99. Published

    An insight into structural design against deflection

    Ji, T. & Cunningham, L., Aug 2018, In: Structures. 15

    Research output: Contribution to journalArticlepeer-review

  100. Published

    Resistance of Axially Loaded T- and X-Joints of Elliptical Hollow Sections at Elevated Temperatures – A Finite Element Study

    Ozyurt, E. & Wang, Y., 1 Jun 2018, In: Structures. 14, p. 15-31 17 p.

    Research output: Contribution to journalArticlepeer-review

  101. Published

    Non-linear FE modelling of plain and CFRP strengthened masonry panels under out-of-plane loads

    Abdulla, K., Cunningham, L. & Gillie, M., 23 May 2018, In: Masonry International. 30, 3, p. 61 70 p.

    Research output: Contribution to journalArticlepeer-review

  102. Published

    The ICCP-SS Technique for Retrofitting Reinforced Concrete Compressive Members subjected to Corrosion

    Zhu, J., Su, M., Huang, J., Ueda, T. & Xing, F., 10 Apr 2018, In: Construction and Building Materials. 167, p. 669-679 11 p.

    Research output: Contribution to journalArticlepeer-review

  103. Published

    The effect of load-induced thermal strain on flat slab behaviour at elevated temperatures

    Al Hamd, R. K. S., Gillie, M., Warren, H., Torelli, G., Stratford, T. & Wang, Y., 1 Apr 2018, In: Fire Safety Journal. 97, p. 12-18 7 p.

    Research output: Contribution to journalArticlepeer-review

  104. Published

    3D-modelling of a Composite Steel Frame Building subject to Post-Earthquake Fire

    Suwondo, R., Cunningham, L., Gillie, M. & Bailey, C., 26 Mar 2018, Proceedings of the 2018 MACE PGR Conference, Manchester, UK . Guardado, A. (ed.). Manchester: University of Manchester, p. 2-4

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  105. Published

    Design of aluminium alloy stocky hollow sections subjected to concentrated transverse loads

    Su, M. & Young, B., Mar 2018, In: Thin-Walled Structures. 124, p. 546-557

    Research output: Contribution to journalArticlepeer-review

  106. Accepted/In press

    Meso-scale modelling of mechanical behaviour and damage evolution in normal strength concrete

    Wang, J., Jivkov, A., Engelberg, D. & Li, Q., 20 Feb 2018, (Accepted/In press) Proceedings of the 22nd European Conference on Fracture (ECF22). Elsevier BV, 6 p. 163

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  107. Published

    Cover separation of CFRP strengthened beam-type cantilevers with steel bolt anchorage

    Zhang, D., Shi, H., Zhu, J., Su, M. & Jin, W. L., 1 Feb 2018, In: Engineering Structures. 156, p. 224-234 11 p.

    Research output: Contribution to journalArticlepeer-review

  108. Published

    Experimental study of CFRP strengthened steel columns subject to lateral impact loads

    Kadhim, M. M. A., Wu, Z. & Cunningham, L. S., 1 Feb 2018, In: Composite Structures. 185, p. 94-104 11 p.

    Research output: Contribution to journalArticlepeer-review

  109. Published

    Influence of target strength on the penetration depth of shaped charge jets into RHA targets

    Elshenawy, T., Elbeih, A. & Li, Q. M., Feb 2018, In: International Journal of Mechanical Sciences. 136, p. 234-242 9 p.

    Research output: Contribution to journalArticlepeer-review

  110. Published

    Numerical modelling of wave downfall pressures on the deck landward of a vertical breakwater

    Baines, A., Cunningham, L. & Rogers, B. D., 31 Jan 2018, ICE Coasts, Marine Structures and Breakwaters 2017: Realising the Potential. Burgess, K. (ed.). ICE Publishing, p. 1051 1061 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  111. Published

    Applications of Fire Engineering: Proceedings of the International Conference of Applications of Structural Fire Engineering

    Gillie, M. (ed.) & Wang, Y. (ed.), 1 Jan 2018, London: A. A. Balkema. 404 p.

    Research output: Book/ReportBookpeer-review

  112. Published

    Dynamic compressive behaviour of cellular materials: A review of phenomenon, mechanism and modelling

    Sun, Y. & Li, Q. M., 2018, In: International Journal of Impact Engineering. 112, p. 74-115

    Research output: Contribution to journalArticlepeer-review

  113. Published

    Effect of earthquake damage on the behaviour of composite steel frames in fire

    Suwondo, R., Gillie, M., Cunningham, L. & Bailey, C., 2018, In: Advances in Structural Engineering.

    Research output: Contribution to journalArticlepeer-review

  114. Published

    Effectiveness of Strengthening Approaches for Existing Earthen Construction

    Abdulla, K., Cunningham, L. & Gillie, M., 2018, Proceedings of Structural Faults & Repair 2018: 17th International Conference . Forde, M. C. (ed.). Edinburgh, p. 1 17 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  115. Published

    Interaction diagram based method for fire resistance design of eccentrically loaded concrete-filled steel tubular columns

    Albero, V., Espinos, A., Romero, M., Wang, Y., Renaud, C., Schaumann, P. & Nigro, E., 2018, In: Thin-Walled Structures. 130, p. 641-651 11 p.

    Research output: Contribution to journalArticlepeer-review

  116. Published

    Loading rate effects on CFRP strengthened steel square hollow sections under lateral impact

    Kadhim, M. M. A., Wu, Z. & Cunningham, L. S., 2018, In: Engineering Structures.

    Research output: Contribution to journalArticlepeer-review

  117. Published

    New definitions of deformation index for the measurement of bus survival space in crash

    Abdul Hamid, I. & Li, Q. M., 2018, In: Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering.

    Research output: Contribution to journalArticlepeer-review

  118. Published

    Punching Shear Behavior and Design of an Innovative Connection from Steel Tubular Column to Flat Concrete Slab

    Yu, J. & Wang, Y., 2018, In: Journal of Structural Engineering. 144, 9, p. 1-13 13 p., 04018144.

    Research output: Contribution to journalArticlepeer-review

  119. 2017
  120. Published

    Simulating masonry wall behaviour using a simplified micro-model approach

    Abdulla, K., Cunningham, L. & Gillie, M., 15 Nov 2017, In: Engineering Structures. 151, p. 349 365 p.

    Research output: Contribution to journalArticlepeer-review

  121. Published

    Experimental Investigation of CFRP-Strengthened Steel Beams with Web Openings

    Altaee, M. J., Cunningham, L. & Gillie, M., Nov 2017, In: Journal of Constructional Steel Research. 138, p. 750-760 10 p.

    Research output: Contribution to journalArticlepeer-review

  122. Published

    Meso-scale mechanism of compaction shock propagation in cellular materials

    Xi, C. Q. & Li, Q. M., Nov 2017, In: International Journal of Impact Engineering. 109, p. 321-334

    Research output: Contribution to journalArticlepeer-review

  123. Published

    Structural effects on compressive strength enhancement of concrete-like materials in a split Hopkinson pressure bar test

    Flores-Johnson, E. A. & Li, Q. M., Nov 2017, In: International Journal of Impact Engineering. 109, p. 408-418 11 p.

    Research output: Contribution to journalArticlepeer-review

  124. Published

    Modified K&C model for cratering and scabbing of concrete slab under projectile impact

    Kong, X. Z., Fang, Q., Li, Q. M., Wu, H. & Crawford, J., Oct 2017, In: International Journal of Impact Engineering. 108, p. 217-228

    Research output: Contribution to journalArticlepeer-review

  125. Published

    Effects of loading rate on the behaviour of CFRP strengthened steel members

    Kadhim, M., Wu, Z-J. & Cunningham, L., 15 Sep 2017, Proceedings of the 4th International Conference on Smart Monitoring, Assessment and Rehabilitation of Civil Structures: SMAR 2017. Zurich, p. 1-8 8 p. 278

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  126. Published

    Mechanical properties of high strength aluminium alloy at elevated temperatures

    Su, M. & Young, B., 13 Sep 2017, In: ce/papers.

    Research output: Contribution to journalArticlepeer-review

  127. Published

    Post earthquake fire behaviour of composite steel framed structures

    Suwondo, R., Gillie, M., Bailey, C. & Cunningham, L., 8 Sep 2017, Applications of Structural Fire Engineering 2017. Gillie, M. & Wang, Y. (eds.). Manchester

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  128. Published

    Design of glass elements for lateral torsional buckling: A review of existing approaches

    Riddell-Smith, L., Cunningham, L. & Mandal, P., Sep 2017, In: Journal of Architectural Engineering. 23, 3, p. 1-9 9 p.

    Research output: Contribution to journalArticlepeer-review

  129. Published

    FRP reinforced-concrete slabs: a comparative design study

    Stuart, V. & Cunningham, L., Aug 2017, In: Proceedings of the Institution of Civil Engineers: Structures and Buildings. 170, 8, p. 581-602 22 p.

    Research output: Contribution to journalArticlepeer-review

  130. Accepted/In press

    THE BOND BEHAVIOR BETWEEN C-FRCM COMPOSITE AND CONCRETE UNDER THE IMPRESSED CURRENT CATHODIC PROTECTION

    Zhu, J., Lin, W., Chen, P., Ueda, T., Xing, F., Wei, L-L., Zhu, M. & Su, M., 19 Jul 2017, (Accepted/In press) APFIS2017 - 6th Asia-Pacific Conference on FRP in Structures .

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  131. Published

    State space approach with fem for the determination of structural behaviour of composite plates

    Albostami, A., Wu, Z-J. & Zou, Z., Jul 2017, In: International Journal of Structural Integrity. 8, 4, 1757-9864.

    Research output: Contribution to journalArticlepeer-review

  132. Published

    Classification of aluminium alloy cross-sections

    Su, M. N., Young, B. & Gardner, L., 15 Jun 2017, In: Engineering Structures. 141, p. 29-40 12 p.

    Research output: Contribution to journalArticlepeer-review

  133. Published

    Experimental and numerical study of temperature developments in PIR core sandwich panels with joint

    Wang, Y. C. & Foster, A., 1 Jun 2017, In: Fire Safety Journal. 90, p. 1-14 14 p.

    Research output: Contribution to journalArticlepeer-review

  134. Published

    Elasticity

    Wu, Z., Wu, H-J. & Han, F., Jun 2017, Second ed. Beijing: Beijing Institute of Technology. 356 p.

    Research output: Book/ReportBookpeer-review

  135. Published

    Elasticity

    Wu, Z., Jun 2017, 2nd ed. Beijing: Beijing Institute of Technology. 356 p.

    Research output: Book/ReportBookpeer-review

  136. Published

    Reliability based determination of material partial safety factors for cast iron beams in jack arched construction exposed to standard and natural fires

    Maraveas, C., Wang, Y. C. & Swailes, T., Jun 2017, In: Fire Safety Journal. 90, p. 44-53 10 p.

    Research output: Contribution to journalArticlepeer-review

  137. Published

    一种纤维复合胶板及其制备方法

    Su, M., Zhu, J. & Xing, F., 24 May 2017, Patent No. 201710001260.4

    Research output: Patent

  138. Published

    Experimental and numerical investigation into strengthening flat slabs at corner columns with externally bonded CFRP

    Abdulrahman, B., Wu, Z-J. & Cunningham, L., 15 May 2017, In: Construction and Building Materials. 139, p. 132-147 16 p.

    Research output: Contribution to journalArticlepeer-review

  139. Published

    Equivalent Plane Stress FE Models for Grout-Filled Buckling Restrained Braces

    Calzeta Valdes, M. A., Ji, T. & Cunningham, L., Apr 2017, Proceedings of the 2017 MACE PGR Conference. Manchester: University of Manchester, p. 17-19 3 p. 1.2

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  140. Published

    Non-linear simulation of masonry behaviour under cyclic loads

    Abdulla, K., Cunningham, L. & Gillie, M., Apr 2017, Proceedings of the 2017 MACE PGR Conference. Manchester: University of Manchester, p. 20-22 3 p. 1.3

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  141. Published

    Simulation of wave downfall pressures on coastal protection structures: energy considerations

    Baines, A., Cunningham, L. & Rogers, B. D., Apr 2017, Proceedings of the 2017 MACE PGR Conference. Manchester, p. 26-28 3 p. 2.1

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  142. Published

    铝合金结构性能与设计方法研究

    Zhu, J., Su, M. & Young, B., Apr 2017, Wuhan University Press.

    Research output: Book/ReportBook

  143. Published

    Constant effective thermal conductivity of intumescent coatings: Analysis of experimental results

    Li, G. Q., Han, J. & Wang, Y. C., 1 Mar 2017, In: Journal of Fire Sciences. 35, 2, p. 132-155 24 p.

    Research output: Contribution to journalArticlepeer-review

  144. Published

    Modelling Impact Resistance of Polymer Laminated Steelwork

    Kadhim, M., Wu, Z-J. & Cunningham, L., Mar 2017, In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics. 170, 1, p. 7-24

    Research output: Contribution to journalArticlepeer-review

  145. Published

    New model for post-fatigue behaviour of CFRP to concrete bond interface in single shear

    Daud, R., Cunningham, L. & Wang, Y., Mar 2017, In: Composite Structures. 163, p. 63-76 14 p.

    Research output: Contribution to journalArticlepeer-review

  146. Published

    Effect of top coating on insulating properties of intumescent coating

    Han, J., Li, G. & Wang, Y., 1 Feb 2017, In: Jianzhu Cailiao Xuebao/Journal of Building Materials. 20, 1, p. 67-72 6 p.

    Research output: Contribution to journalArticlepeer-review

  147. Published

    Optimisation of FRP Strengthening Systems for Masonry Arch Bridges

    Daryadel, M. & Cunningham, L., Feb 2017, In: Masonry International. 29, 2, p. 61-72 12 p.

    Research output: Contribution to journalArticlepeer-review

  148. Published

    Trajectory instability and convergence of the curvilinear motion of a hard projectile in deep penetration

    Gao, X. & Li, Q. M., Feb 2017, In: International Journal of Mechanical Sciences. 121, p. 123–142

    Research output: Contribution to journalArticlepeer-review

  149. Published

    Strain growth in a finite-length cylindrical shell under internal pressure pulse

    Dong, Q., Li, Q. M. & Zheng, J., 11 Jan 2017, In: Journal of Pressure Vessel Technology, Transactions of the ASME.

    Research output: Contribution to journalArticlepeer-review

  150. Published

    Axially Restrained Steel Beams with Web Openings at Elevated Temperatures, Part 1: Behaviour and Numerical Simulation Results

    Najafi, M. & Wang, Y., 2017, In: Journal of Constructional Steel Research. 128

    Research output: Contribution to journalArticlepeer-review

  151. Published

    Axially Restrained Steel Beams with Web Openings at Elevated Temperatures, Part 2: Development of an Analytical Method

    Najafi, M. & Wang, Y., 2017, In: Journal of Constructional Steel Research. 128

    Research output: Contribution to journalArticlepeer-review

  152. Published

    Influence of machining process on the mechanical behaviour of injection-moulded specimens of talc-filled Polypropylene

    Codolini, A., Li, Q. M. & Wilkinson, A., 2017, In: Polymer Testing. 62, p. 342-347 6 p.

    Research output: Contribution to journalArticlepeer-review

  153. Published

    Numerical modelling of slab-column concrete connections at elevated temperatures

    Al Hamd, R., Gillie, M. & Wang, Y., 2017.

    Research output: Contribution to conferencePaperpeer-review

  154. Published

    Structural Behaviour of Cross-Laminated Timber Panels by the State Space Approach

    Albostami, A., Wu, Z-J. & Cunningham, L., 2017, In: International Journal of Computational Methods and Experimental Measurements. 5, 6, p. 834-846 12 p.

    Research output: Contribution to journalArticlepeer-review

  155. Published

    Use of N-Methyliminodiacetic Acid Boronate Esters in Suzuki-Miyaura Cross-Coupling Polymerizations of Triarylamine and Fluorene Monomers

    Foster, A., Bagutski, V., Ayuso Carrillo, J., Humphries, M., Ingleson, M. & Turner, M., 2017, In: Journal of Polymer Science. Part A: Polymer Chemistry.

    Research output: Contribution to journalArticlepeer-review

  156. 2016
  157. Published

    Critical Impact Yaw for Long-Rod Penetrators

    Kong, X., Li, Q. M. & Fang, Q., 1 Dec 2016, In: Journal of Applied Mechanics, Transactions ASME. 83, 12, 121008.

    Research output: Contribution to journalArticlepeer-review

  158. Published

    Generation of Micro-scale Finite Element Models from Synchrotron X-ray CT Images for Multidirectional Carbon Fibre Reinforced Composites

    Sencu, R., Wang, Z., Wang, Y., Withers, P., Rau, C., Parson, A. & Soutis, C., Dec 2016, In: Composites: Part A. 91, 1, p. 85-95 11 p.

    Research output: Contribution to journalArticlepeer-review

  159. Published

    The continuous strength method for the design of aluminium alloy structural elements

    Su, M. N., Young, B. & Gardner, L., 1 Sep 2016, In: Engineering Structures. 122, p. 338-348 11 p.

    Research output: Contribution to journalArticlepeer-review

  160. Published

    Web bearing design of aluminium alloy hollow sections

    Su, M. & Young, B., 1 Sep 2016, Insights and Innovations in Structural Engineering, Mechanics and Computation - Proceedings of the 6th International Conference on Structural Engineering, Mechanics and Computation, SEMC 2016. CRC Press, p. 1093-1098 6 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  161. Published

    An adaptive stochastic multi-scale method for cohesive fracture modelling of quasi-brittle heterogeneous materials under uniaxial tension

    Sencu, R., Yang, Z. & Wang, Y. C., Sep 2016, In: Engineering Fracture Mechanics. 163, p. 499-522 24 p.

    Research output: Contribution to journalArticlepeer-review

  162. Published

    Elastic stiffness of reverse channel joint web components under bolt tension

    Jafarian, M. & Wang, Y., Sep 2016, In: Archives of Civil and Mechanical Engineering. 16, 4, p. 961-981 21 p.

    Research output: Contribution to journalArticlepeer-review

  163. Published

    Modelling of tsunami-induced bore and structure interaction

    Pringgana, G., Cunningham, L. & Rogers, B. D., Sep 2016, In: Institution of Civil Engineers. Proceedings. Engineering and Computational Mechanics. 169, 3, p. 109-125 17 p., 1500020.

    Research output: Contribution to journalArticlepeer-review

  164. Published

    Scalable synthesis of multicolour conjugated polymer nanoparticles via Suzuki-Miyaura polymerisation in a miniemulsion and application in bioimaging.

    Behrendt, J. M., Esquivel Guzman, J. A., Purdie, L., Willcock, H., Morrison, J. J., Foster, A. B., O'Reilly, R. K., McCairn, M. C. & Turner, M. L., 30 Aug 2016, In: Reactive & Functional Polymers. 107, p. 69-77 9 p.

    Research output: Contribution to journalArticlepeer-review

  165. Accepted/In press

    Electrochemical Chloride Extraction for RC Members by using CFRP

    Zhu, J., Chen, P., Wei, L-L., Liang, C., Fang, Y. & Su, M., 17 Aug 2016, (Accepted/In press) 5th International Symposium on Reliability Engineering and Risk Management.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  166. Published

    Explicit Modelling of Large Deflection Behaviour of Restrained Reinforced Concrete Beams in Fire

    Albrifkani, S. & Wang, Y., 15 Aug 2016, In: Engineering Structures. 121, p. 97-119 23 p.

    Research output: Contribution to journalArticlepeer-review

  167. Published

    Flexural response of aluminium alloy SHS and RHS with internal stiffeners

    Su, M. N., Young, B. & Gardner, L., 15 Aug 2016, In: Engineering Structures. 121, p. 170-180 11 p.

    Research output: Contribution to journalArticlepeer-review

  168. Published

    Determination of the constitutive relation and critical condition for the shock compression of cellular solids

    Sun, Y., Li, Q. M., Mcdonald, S. & Withers, P., 1 Aug 2016, In: Mechanics of Materials. 99, p. 26-36 11 p.

    Research output: Contribution to journalArticlepeer-review

  169. Published

    Mechanism Analysis of RC Slabs Strengthened with Pre-stressed and Non Pre-stressed FRP

    Davvari, M., Wu, Z-J. & Zou, Z., 4 Jul 2016, Environment, Efficiency and Economic Challenges for Concrete: 9th International Concrete Conference 2016 Environment, Efficiency and Economic Challenges for Concrete 4-6 July 2016 Dundee, Scotland, UK . Dundee: University of Dundee, Vol. 1322. p. 1008-1014

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  170. Published

    A Theoretical Model for Quantifying Expansion of Intumescent Coating under Different Heating Conditions

    Cirpici, B., Wang, Y., Rogers, B. D. & Bourbigot, S., Jul 2016, In: Polymer Engineering and Science. p. 798-809

    Research output: Contribution to journalArticlepeer-review

  171. Published

    Fibre Reinforced Polymer Composite Deck Elements for Highway Bridges in Developing Countries

    Omoding, N. & Cunningham, L., 16 Jun 2016. 7 p.

    Research output: Contribution to conferencePaperpeer-review

  172. Published

    Effects of Non-Uniform Temperature Distribution on Critical Member Temperature of Steel Tubular Truss

    Ozyurt, E. & Wang, Y., 1 Jun 2016, In: Engineering Structures. 116, p. 95-106 12 p.

    Research output: Contribution to journalArticlepeer-review

  173. Published

    The Effect of Ground Conditions under a Solar Pond on the Performance of a Solar Air-conditioning System

    Kanan, S., Dewsbury, J., Lane-Serff, G. F. & Asim, M., Jun 2016, In: Energy Procedia. 91, p. 777–784 8 p.

    Research output: Contribution to journalArticlepeer-review

  174. Published

    CFRP Strengthening of Steel Beams with Web Openings

    Al Taee, M., Cunningham, L. & Gillie, M., 17 May 2016, Proceedings of Structural Faults & Repair 2016: 16th International Conference. Forde, M. C. (ed.). Edinburgh, 12 p. 1754

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  175. Published

    The variation in elastic modulus throughout the compression of foam materials

    Sun, Y., Amirrasouli, B., Razavi, S. B., Li, Q. M., Lowe, T. & Withers, P., 15 May 2016, In: Acta Materialia. 110, p. 161–174

    Research output: Contribution to journalArticlepeer-review

  176. Published

    Elevated temperature behaviour and fire resistance of cast iron columns

    Maraveas, C., Wang, Y. & Swailes, T., May 2016, In: Fire Safety Journal. 82, p. 37-48 12 p.

    Research output: Contribution to journalArticlepeer-review

  177. Published

    FE modelling of CFRP strengthened steel members under impact loads

    Kadhim, M., Wu, Z-J. & Cunningham, L., 31 Mar 2016, p. 343-346. 4 p.

    Research output: Contribution to conferencePaperpeer-review

  178. Published

    Porosity and Sorptivity of Aerated Concrete with Different Aluminium Powder Content

    Shabbar, R., Nedwell, P., Wilson, M. & Wu, Z-J., 26 Mar 2016, Proceedings of 2016 2nd International Conference on Architecture, Structures and Civil Engineering. London, 7 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  179. Published

    Novel Technique for Strengthening Steel Beams with Web Penetrations

    Al Taee, M., Cunningham, L. & Gillie, M., 22 Mar 2016, Proceedings of the MACE PGR Conference. Rogers, B. D. (ed.). Manchester: University of Manchester, p. 9-11 3 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review

  180. Published

    Precise Determination of Structural Behaviour of Composite Plates

    Albostami, A., Wu, Z-J. & Zou, Z., 22 Mar 2016, p. 12-14. 3 p.

    Research output: Contribution to conferencePaperpeer-review

  181. Published

    Moment capacity of cast iron beams in jack arched construction exposed to fire

    Maraveas, C., Wang, Y. & Swailes, T., 24 Feb 2016, In: Proceedings of the Institution of Civil Engineers: Structures and Buildings. 1500120.

    Research output: Contribution to journalArticlepeer-review

  182. Published

    Assessment of the Thermal Conductivity of Intumescent Coatings in Fire

    Cirpici, B., Wang, Y. & Rogers, B., 13 Feb 2016, In: Fire Safety Journal. 81, p. 74-84 11 p.

    Research output: Contribution to journalArticlepeer-review

  183. Published

    Investigation of strain-rate effect on the compressive behaviour of closed-cell aluminium foam by 3D image-based modelling

    Sun, YL., Li, QM., Lows, T., McDonald, SA. & Withers, P., 5 Jan 2016, In: Materials & Design. 89, p. 215-224 9 p.

    Research output: Contribution to journalArticlepeer-review

  184. Published

    Hybrid steel tubular column/flat slab construction - punching shear resistance

    Wang, Y. & Yan, P. Y., 1 Jan 2016, In: Journal of Constructional Steel Research. 119, p. 154-168 13 p.

    Research output: Contribution to journalArticlepeer-review

  185. Published

    An analytical method to calculate temperatures of components of reverse channel connection to concrete filled steel section under fire conditions

    Jana, T., Wang, Y. & Wald, F., 2016, In: Fire Safety Journal. 82, p. 115-130 16 p.

    Research output: Contribution to journalArticlepeer-review

  186. Published

    Behaviour and design of steel members with web openings under combined bending, shear and compression

    Najafi, M. & Wang, Y., 2016, In: Journal of Constructional Steel Research. 128

    Research output: Contribution to journalArticlepeer-review

  187. Published

    Comparative experimental study of fire resistance ratings of timber assemblies with different fire protection measures

    Xu, Q., Wang, Y., Chen, L., Gao, R. & Li, X., 2016, In: Advances in Structural Engineering. 19, 3, p. 500-512 13 p.

    Research output: Contribution to journalArticlepeer-review

  188. Published

    Crack Propagation for Concrete Flat Plates Using XFEM Method

    Al Hamd, R., Gillie, M., Wang, Y. & Albostami, A., 2016, p. 1-7. 7 p.

    Research output: Contribution to conferencePaperpeer-review

  189. Published

    Design implications of a new load introduction mechanism into concrete-filled steel tubular columns

    Mollazadeh, M. H. & Wang, Y., 2016, In: Structures. p. 37-47 11 p.

    Research output: Contribution to journalArticlepeer-review

  190. Published

    Experimental and Theoretical Bending Stiffness of CLT Panels

    O'Dowd, B., Cunningham, L. S. & Nedwell, P., 2016, In: Institution of Civil Engineers. Proceedings. Construction Materials. 169, 6, p. 277-281

    Research output: Contribution to journalArticlepeer-review

  191. Published

    Experimental study of blast mitigation by foamed concrete

    Tian, X. B., Li, Q. M., Lu, Z. & Wang, Z., 2016, In: International Journal of Protective Structures. 7, 2, p. 179-192

    Research output: Contribution to journalArticlepeer-review

  192. Published

    Load-Deflection Behaviour of Thin-Walled Bolted Plates in Shear at Elevated Temperatures

    He, Y. C. & Wang, Y. C., 2016, In: Thin-Walled Structures. 98, p. 127-148 21 p.

    Research output: Contribution to journalArticlepeer-review

  193. Published

    Modelling punching shear failure using XFEM

    Al Hamd, R., Gillie, M. & Wang, Y., 2016.

    Research output: Contribution to conferencePaperpeer-review

  194. Published

    New mechanism of load introduction into concrete-filled steel tubular column

    Mollazadeh, M. H. & Wang, Y. C., 2016, In: Journal of Structural Engineering.

    Research output: Contribution to journalArticlepeer-review

  195. Published

    Porosity and Sorptivity of Aerated Concrete with Different Aluminium Powder Content

    Shabbar, R., Nedwell, P., Wilson, M. & Wu, Z-J., 2016, In: International Journal of Chemical, Environmental & Biological Sciences. 4, 1, p. 39-42

    Research output: Contribution to journalArticlepeer-review

  196. Published

    Predicting intumescent coating protected steel temperature in fire using constant thermal conductivity

    Li, G. Q., Han, J., Lou, G. B. & Wang, Y. C., 2016, In: Thin-Walled Structures. 98, p. 177-184 7 p.

    Research output: Contribution to journalArticlepeer-review

  197. Published

    The effect of LITS on punching shear in fire

    Al Hamd, R., Gillie, M. & Wang, Y., 2016, The effect of LITS on punching shear in fire.

    Research output: Chapter in Book/Report/Conference proceedingConference contributionpeer-review