Publications | Research Explorer | The University of Manchester

1 - 100 out of 192Page size: 100

10
20
50
100
All

Sort by: Publication date

2020
E-pub ahead of print
Exact solutions for rectangular anisotropic plates with four clamped edges
Xu, Y. & Wu, Z., 13 Nov 2020, In: Mechanics of Advanced Materials and Structures.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1080/15376494.2020.1838007
E-pub ahead of print
Fatigue behaviour and design of corroded reinforced concrete beams intervened by ICCP-SS
Su, M., Wei, L., Liang, H., Zhu, J., Ueda, T. & Xing, F., 9 Nov 2020, In: Composite Structures. p. 113295
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.compstruct.2020.113295
E-pub ahead of print
Numerical investigation and design of aluminium alloy channel section columns at elevated temperatures
Zhu, J., Li, Z. & Su, M-N., 3 Nov 2020, In: Thin-Walled Structures. p. 107225
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tws.2020.107225
Published
Elastic Response of Cross-Laminated Timber Panels using Finite Element and Analytical Techniques
Albostami, A., Wu, Z. & Cunningham, L., 1 Nov 2020, In: Canadian Journal of Civil Engineering.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1139/cjce-2020-0205
Published
The Influence of Multiaxial Stress Relaxation on Component Creep Damage Accumulation in Biaxial, Mixed Primary and Secondary Loading on a Pipe
Matev, N., Ainsworth, R., Su, M., Stevens, M. & Jappy, A., 28 Oct 2020, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. 7 p.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
DOI: https://doi.org/10.1115/PVP2020-21211
E-pub ahead of print
Effect of using recycled waste glass coarse aggregates on the hydrodynamic abrasion resistance of concrete
Omoding, N., Cunningham, L. & Lane-Serff, G. F., 21 Oct 2020, In: Construction and Building Materials.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.conbuildmat.2020.121177
E-pub ahead of print
Direct strength method for cold-formed steel beams with non-uniform temperatures
Alabi-bello, M., Wang, Y. & Su, M., 8 Oct 2020, In: Institution of Civil Engineers. Proceedings. Structures and Buildings. p. 1-18
Research output: Contribution to journal › Article › peer-review
DOI: 10.1680/jstbu.20.00084
Published
Experimental and numerical investigation of mortar and ITZ parameters in meso-scale models of concrete
Wang, J., Jivkov, A., Li, Q. & Engelberg, D., 1 Oct 2020, In: Theoretical and Applied Fracture Mechanics. 109, 102722.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tafmec.2020.102722
Published
Modeling of galvanized lattice steel structures incorporating the effect of joint slip
Zhan, Y., Li, B., Wu, Z., Cunningham, L., Wu, G. & Yang, Y., 1 Oct 2020, In: Journal of Constructional Steel Research. 173, p. 1-11
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jcsr.2020.106252
E-pub ahead of print
Mitigation of physical aging with mixed matrix membranes based on crosslinked PIM-1 fillers and PIM-1
Tamaddondar, M., Foster, A. B., Carta, M., Gorgojo, P., Mckeown, N. B. & Budd, P. M., 9 Sep 2020, In: ACS applied materials & interfaces.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1021/acsami.0c13838
Published
Advanced lattice material with high energy absorption based on topology optimisation
Yang, C. & Li, Q., 1 Sep 2020, In: Mechanics of Materials. 103536
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.mechmat.2020.103536
Accepted/In press
Behaviour of Concrete-filled Cold-formed High Strength Steel Circular Stub Columns
Su, M., Cai, Y., Chen, X. & Young, B., 16 Aug 2020, (Accepted/In press) In: Thin-Walled Structures.
Research output: Contribution to journal › Article › peer-review
E-pub ahead of print
Finite element modelling and design of steel plate shear wall buckling-restrained by hat-section cold-formed steel members
Tan, J., Gu, C., Su, M., Wang, Y., Wang, K., Shi, Y., Lan, Y., Luo, W., Deng, X., Bai, Y. & Chen, Q., 11 Aug 2020, In: Journal of Constructional Steel Research. 174, p. 106274
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jcsr.2020.106274
Published
Organic Semiconductors Processed from Synthesis-to-Device in Water
Rahmanudin, A., Marcial Hernández, R., Zamhuri, A., Walton, A., Tate, D., Khan, R., Aphichatpanichakul, S., Foster, A., Broll, S. & Turner, M., 11 Aug 2020, In: Advanced Science.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1002/advs.202002010
E-pub ahead of print
A numerical investigation into stripping failure of bolt assemblies at elevated temperatures
Shaheen, M., Foster, A., Cunningham, L. & Afshan, S., 1 Aug 2020, In: Structures. 27, p. 1458-1466 7 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.istruc.2020.07.042
Published
Seismic behaviour of concrete-filled steel tubular columns with internal H-section steel under pure torsion and compression–torsion loads
Pi, Z., Su, M., Peng, Y., Wang, Y., Luo, W. & Lan, Y., 1 Aug 2020, In: Engineering Structures. 216, p. 110761
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2020.110761
Published
Metric of Shock Severity
Yan, Y. & Li, Q., 29 Jul 2020, In: Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. 476, 2239
Research output: Contribution to journal › Article › peer-review
DOI: 10.1098/rspa.2019.0694
Published
In-plane Strengthening of Existing Masonry Walls using Plant-derived Textile
Tian, Y. & Cunningham, L., 24 Jul 2020, In: Masonry International. 33, 1, p. 27-35
Research output: Contribution to journal › Article › peer-review
E-pub ahead of print
Fire Safety Assessment of Epoxy Composites Reinforced by Carbon Fibre and Graphene
Zhang, Q., Wang, Y. C., Soutis, C., Bailey, C. G. & Hu, Y., 14 Jul 2020, In: Applied Composite Materials.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1007/s10443-020-09824-4
Accepted/In press
Design and implementation of net zero displacement filter for the synthesis of a mechanical shock signal under specified shock response spectrum
Yan, Y. & Li, Q., 27 Jun 2020, (Accepted/In press) In: Mechanical Systems and Signal Processing.
Research output: Contribution to journal › Article › peer-review
Published
Behaviour of Axially and Rotationally Restrained Reinforced Concrete Beams in Fire
Albrifkani, S. & Wang, Y., 15 Jun 2020, In: Engineering Structures. 213, 110572.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2020.110572
Accepted/In press
Post-earthquake fire performance of square concrete-filled steel tube columns
Wang, Y-H., Tang, Q., Su, M., Tan, J-K., Wang, W-Y., Lan, Y-S., Luo, W. & Zhou, Y., 26 May 2020, (Accepted/In press) In: Thin-Walled Structures.
Research output: Contribution to journal › Article › peer-review
Published
Dual damage criteria in a crash stop
Yang, C. & Li, Q. M., 25 May 2020, In: International Journal of Mechanical Sciences. 183, p. 1-13 13 p., 105732.
Research output: Contribution to journal › Article › peer-review
DOI: https://doi.org/10.1016/j.ijmecsci.2020.105732
Published
Discussion of “Slenderness Effects in Circular RC Columns Strengthened with CFRP Sheets Using Different External Bonding Techniques” by Masood NoroozOlyaee and Davood Mostofinejad
Zhan, Y., Li, B. & Wu, Z., 22 May 2020, In: Journal of Composites for Construction. 24, 4, 2 p., 07020005.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)CC.1943-5614.0001043
E-pub ahead of print
Multiscale image-based modelling of damage and fracture in carbon fibre reinforced polymer composites
Sencu, R. M., Zhang, J., Wang, Y., Withers, P. & Soutis, C., 22 May 2020, In: Composites Science and Technology.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.compscitech.2020.108243
Accepted/In press
Synergistic Effects of a Novel Method of Preparing Graphene/Polyvinyl Alcohol to Modify Cementitious Material
Pei, C., Zhou, X., Zhu, J-H., Su, M., Wang, Y. & Xing, F., 18 May 2020, (Accepted/In press) In: Construction and Building Materials.
Research output: Contribution to journal › Article › peer-review
Published
A new method for calculating hot-spot stress in gap DKK CHS joints under arbitrary loading
Oshogbunu, E., Wang, Y. & Stallard, T., 1 May 2020, In: Engineering Structures. 210, 110366.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2020.110366
Published
Review of Concrete Resistance to Abrasion by Waterborne Solids
Omoding, N., Cunningham, L. & Lane-Serff, G. F., 1 May 2020, In: ACI Materials Journal. 117, 3, p. 41-52
Research output: Contribution to journal › Review article › peer-review
DOI: 10.14359/51724592
Published
Design of Aluminum Alloy Channel Section Beams
Zhu, J-H., Li, Z., Su, M. & Young, B., May 2020, In: Journal of Structural Engineering.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)ST.1943-541X.0002615
E-pub ahead of print
Influence of loading ratio on flat slab connections at elevated temperature: A numerical study
Al Hamd, R., Gillie, M., Mohamad, S. A. & Cunningham, L., 20 Apr 2020, In: Frontiers of Structural and Civil Engineering. p. 1 14 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1007/s11709-020-0620-9
E-pub ahead of print
Experimental Study on the Mechanical Properties of Straw-fibre Reinforced Adobe Masonry
Abdulla, K., Cunningham, L. & Gillie, M., 19 Apr 2020, In: Journal of Materials in Civil Engineering. 32, 11, p. 1-15 15 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)MT.1943-5533.0003410
Accepted/In press
A method for evaluating the bond behavior and anchorage length of embedded carbon yarn in the cementitious matrix
Zhu, M., Zhu, J-H., Ueda, T., Su, M. & Xing, F., 5 Apr 2020, (Accepted/In press) In: Construction and Building Materials.
Research output: Contribution to journal › Article › peer-review
E-pub ahead of print
Using soft polymer template engineering of mesoporous TiO2 scaffolds to increase perovskite grain size and solar cell efficiency
Lian, Q., Mokhtar, M. Z., Lu, D., Zhu, M., Jacobs, J., Foster, A. B., Thomas, A. G., Spencer, B. F., Wu, S., Liu, C., Hodson, N., Smith, B., Alkaltham, A., Alkhudhari, O., Watson, T. M. & Saunders, B. R., 2 Apr 2020, In: ACS applied materials & interfaces.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1021/acsami.0c02248
E-pub ahead of print
Behaviour of stainless and high strength steel bolt assemblies at elevated temperatures - a review
Shaheen, M., Foster, A., Cunningham, L. & Afshan, S., 2 Mar 2020, In: Fire Safety Journal.
Research output: Contribution to journal › Review article › peer-review
Published
Developing advanced techniques to reclaim existing end of service life (EoSL) bricks – an assessment of reuse technical viability
Zhou, K., Chen, H-M., Wang, Y., Lam, D., Ajayebi, A. & Hopkinson, P., 14 Feb 2020, In: Developments in the Built Environment. 2, 100006.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.dibe.2020.100006
Published
Deformation and failure behaviors of anode in lithium-ion batteries: Model and mechanism
Wang, L., Duan, X., Liu, B., Li, Q. M., Yin, S. & Xu, J., 1 Feb 2020, In: Journal of Power Sources. 448, 227468.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jpowsour.2019.227468
Published
Modelling progressive failure of steel moment frames exposed to localised fire: The 3rd International Conference on Eco Engineering Development 13–14 November 2019, Solo, Indonesia
Suwondo, R., Cunningham, L. & Gillie, M., 1 Feb 2020, IOP Conference Series: Earth and Environmental Science: The 3rd International Conference on Eco Engineering Development 13–14 November 2019, Solo, Indonesia. IOP Publishing Ltd, Vol. 426. p. 1-6
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
DOI: 10.1088/1755-1315/426/1/012046
Published
A general shock waveform and characterisation method
Yan, Y. & Li, Q. M., Feb 2020, In: Mechanical Systems and Signal Processing. 136, 106508.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ymssp.2019.106508
Published
An experimental study of the effects of topcoat on aging and fire protection properties of intumescent coatings for steel elements
Wang, L. L., Wang, Y., Li, G. Q. & Zhang, QQ., Feb 2020, In: Fire Safety Journal. 111, 102931.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2019.102931
Published
Effective waveform representation of responsive signals initiated by impulsive actions in physical and engineering systems
Yan, Y. & Li, Q. M., Feb 2020, In: International Journal of Engineering Science. 147, 103199.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ijengsci.2019.103199
E-pub ahead of print
C-FRCM Jacket Confinement for RC Columns under Impressed Current Cathodic Protection
Zhu, J., Wang, Z., Su, M., Ueda, T. & Xing, F., 7 Jan 2020, In: Journal of Composites for Construction. 24, 2, p. 04020001
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)CC.1943-5614.0001006
Published
Understanding the Topology of the Polymer of Intrinsic Microporosity PIM-1: Cyclics, Tadpoles, and Network Structures and Their Impact on Membrane Performance
Foster, A., Tamaddondar, M., Luque-Alled, J., Harrison, W., Li, Z., Gorgojo, P. & Budd, P., 7 Jan 2020, In: Macromolecules. 53, p. 569-583 15 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1021/acs.macromol.9b02185
Published
Anodic and Mechanical Behavior of Carbon Fiber Reinforced Polymer as a Dual-Functional Material in Chloride-Contaminated Concrete
Wei, L., Zhu, J., Dong, Z., Liu, J., Liu, W., Su, M. & Xing, F., 4 Jan 2020, In: Materials. 13, 1, p. 222
Research output: Contribution to journal › Article › peer-review
DOI: 10.3390/ma13010222
Published
Structural optimisation for the collapse zone of a railway vehicle
Yang, C. & Li, Q. M., 1 Jan 2020, In: International Journal of Mechanical Sciences. 165, 105201.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ijmecsci.2019.105201
Published
Porosity variation of lithium-ion battery separators under uniaxial tension
Wang, Y., Li, Q. & Xing, Y., Jan 2020, In: International Journal of Mechanical Sciences.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ijmecsci.2020.105496
Published
Fire safety design of open plan apartments in England
Hopkin, C., Spearpoint, M., Hopkin, D. & Wang, Y., 2020, In: Architectural Engineering and Design Management.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1080/17452007.2020.1719812
Published
Intrinsically Microporous Polymer Nanosheets for High Performance Gas Separation Membranes
Tamaddondar, M., Foster, A., Luque-Alled, J., Msayib, K. J., Carta, M., Sorribas, S., Gorgojo, P., Mckeown, N. B. & Budd, P., 2020, In: Macromolecular rapid communications. 41, 2, p. 1-8 8 p., 1900572.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1002/marc.201900572
2019
Published
Design Fire Characteristics for Probabilistic Assessments of Dwellings in England
Hopkin, C., Spearpoint, M., Wang, Y. & Hopkin, D., 11 Nov 2019, In: Fire Technology.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1007/s10694-019-00925-6
E-pub ahead of print
Tensile behaviour of carbon fabric reinforced cementitious matrix composites as both strengthening and anode materials
Wei, L., Zhu, J., Ueda, T., Su, M., Liu, J., Liu, W., Tang, L. & Xing, F., 5 Nov 2019, In: Composite Structures. 234, p. 111675
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.compstruct.2019.111675
E-pub ahead of print
Flexural performance of corroded continuous RC beams rehabilitated by ICCP-SS
Su, M., Zeng, C., Li, W., Zhu, J., Lin, W., Ueda, T. & Xing, F., 11 Oct 2019, In: Composite Structures. 232, p. 111556
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.compstruct.2019.111556
E-pub ahead of print
Compressive behaviour of built-up hot-rolled steel hollow and composite sections
Tan, J., Wang, Y., Su, M., Zhang, H. & Peng, Y., 13 Aug 2019, In: Engineering Structures. 198, p. 109528
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2019.109528
E-pub ahead of print
Sustainable recycling of intact carbon fibres from end-of-service-life composites
Chen, P., Pei, C., Zhu, J., Su, M. & Xing, F., 13 Aug 2019, In: Green Chemistry. 21, 17, p. 4757-4768
Research output: Contribution to journal › Article › peer-review
DOI: 10.1039/C9GC01847F
Published
Further assessment of deceleration-time histories for occupant injury and the damage of protected object in a crash stop
Yang, C. & Li, Q. M., Aug 2019, In: International Journal of Impact Engineering. 130, p. 184-191 8 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ijimpeng.2019.04.013
Published
Numerical study of full-scale CFRP strengthened open-section steel columns under transverse impact
Kadhim, M. M. A., Wu, Z. & Cunningham, L. S., 1 Jul 2019, In: Thin-Walled Structures. 140, p. 99-113
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tws.2019.03.034
Published
Ballistic response of hexagonal boron nitride monolayer under impact of a nano-projectile
Tian, H., Zhang, B. & Li, Q., Jun 2019, In: Mechanics of Materials. 133, p. 1-12
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.mechmat.2019.03.003
E-pub ahead of print
Modelling shore-side pressure distributions from violent wave breaking at a seawall
Baines, A., Cunningham, L., Rogers, B. D. & Watson, P., 29 May 2019, In: Proceedings of the Institution of Civil Engineers - Engineering and Computational Mechanics.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1680/jencm.19.00007
Published
Performance evaluation of demountable shear connectors with collar step at ambient and elevated temperatures
Sencu, R. M., Wang, Y. C., Yang, J. & Lam, D., 25 May 2019, In: Engineering Structures. 194, p. 94-105
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2019.05.059
Published
Cutting-induced end surface effect on compressive behaviour of aluminium foams
Meng, K., Chai, C. G., Sun, Y., Wang, W., Wang, Q. & Li, Q. M., 1 May 2019, In: European Journal of Mechanics, A/Solids. 75, p. 410-418
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.euromechsol.2019.02.015
Published
Recovery and Re-Use of Structural Products from End of Life Buildings
Hopkinson, P., Chen, H-M., Zhou, K., Wang, Y. & Lam, D., May 2019, In: Institution of Civil Engineers. Proceedings. Engineering Sustainability. 1800007.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1680/jensu.18.00007
Published
Experimental Study on the Shear Performance of Reinforced Concrete Beams Strengthened with Bolted Side-Plating
Liu, X., Chen, Y., Li, L., Su, M., Lu, Z. & Yu, K., 26 Apr 2019, In: Sustainability. 11, 9, p. 2465
Research output: Contribution to journal › Article › peer-review
DOI: 10.3390/su11092465
Published
Collapse of Particle-Laden Buoyant Plumes
Apsley, D. & Lane-Serff, G. F., 25 Apr 2019, In: Journal of Fluid Mechanics. 865, p. 904-927 23 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1017/jfm.2019.74
Published
A solution for sea-sand reinforced concrete beams
Su, M., Wei, L., Zeng, Z., Ueda, T., Xing, F. & Zhu, J., 20 Apr 2019, In: Construction and Building Materials. 204, p. 586-596
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.conbuildmat.2019.01.146
Published
Evaluation of carbon fiber reinforced cementitious matrix as a recyclable strengthening material
Li, W., Zhu, J., Chen, P., Xing, F., Li, D. & Su, M., 20 Apr 2019, In: Journal of Cleaner Production. 217, p. 234-243
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jclepro.2019.01.256
E-pub ahead of print
Design of aluminium alloy beams at elevated temperatures
Su, M., Zhang, Y. & Young, B., 11 Apr 2019, In: Thin-Walled Structures. 140, p. 506-515
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tws.2019.03.052
Published
Material properties of normal and high strength aluminium alloys at elevated temperatures
Su, M. & Young, B., 1 Apr 2019, In: Thin-Walled Structures. 137, p. 463-471
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tws.2019.01.012
Published
Practical Application of CFRP Strengthening to Steel Floor Beams with Web Openings: A numerical Investigation
Altaee, M., Cunningham, L. S. & Gillie, M., Apr 2019, In: Journal of Constructional Steel Research. 155, p. 395-408
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jcsr.2019.01.006
E-pub ahead of print
Numerical study and design of aluminium alloy channel section columns with welds
Zhu, J., Li, Z., Su, M. & Young, B., 9 Mar 2019, In: Thin-Walled Structures. 139, p. 139-150
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tws.2019.03.015
Published
Novel shearhead reinforcement for slab-column connections subject to eccentric load and fire
Al Hamd, R., Gillie, M., Cunningham, L., Warren, H. & Albostami, A., Mar 2019, In: Archives of Civil and Mechanical Engineering. 19, 2, p. 503-524 21 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.acme.2018.12.011
Published
Reliability analysis of intumescent coating protected steel members under the standard fire condition
Inerhunwa, I., Chang Wang, Y. & Su, M., Mar 2019, In: Fire Safety Journal.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2018.12.003
Published
Low-pass-filter-based shock response spectrum and the evaluation method of transmissibility between equipment and sensitive components interfaces
Yan, Y. & Li, Q., 15 Feb 2019, In: Mechanical Systems and Signal Processing. 117, p. 97-115
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ymssp.2018.07.023
Published
Progressive collapse analysis of composite steel frames subject to fire following earthquake
Suwondo, R., Cunningham, L., Gillie, M. & Bailey, C., Jan 2019, In: Fire Safety Journal. 103, p. 49-58
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2018.12.007
Published
An experimental study to assess the feasibility of a three stage thermal conductivity model for intumescent coatings in large space fires
Han, J., Li, G. Q., Wang, Y. & Xu, Q., 2019, In: Fire Safety Journal. 102860.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2019.102860
Published
Assessment of Cross-Laminated Timber Panels by the State Space Approach
Albostami, A., Wu, J. & Cunningham, L., 2019, In: Advances in Structural Engineering.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1177/1369433219841504
Published
Bending and shear behaviour of two layer beams with one layer of rubber recycled aggregate concrete in tension
Ataria, R. & Wang, Y., 2019, In: Structures. p. 214 25 p., 20.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.istruc.2019.03.014
Published
Combined Impressed Current Cathodic Protection and FRCM Strengthening for Corrosion-Prone Concrete Structures
Su, M-N., Wei, L., Zhu, J-H., Ueda, T., Guo, G-P. & Xing, F., 2019, In: Journal of Composites for Construction.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)CC.1943-5614.0000949
Published
Comparative behaviour of ‘I beam- RHS column’ joints with and without web weld
Serrano, M., Carlos, P., Wang, Y., Garcia, M. & Fernando, G., 2019, In: Journal of Constructional Steel Research. 159, p. 330 340 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jcsr.2019.05.002
Published
Effective Thickness Design Methods for Lateral-Torsional Buckling of Laminated Glass
Riddell-smith, L., Mandal, P. & Cunningham, L., 2019, In: Journal of Structural Engineering. 145, 12, p. 06019002
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)ST.1943-541X.0002430
Published
Experimental and numerical investigation of CFRP strengthened steel beams under impact load
Kadhim, M. M. A., Wu, J. & Cunningham, L., 2019, In: Journal of Structural Engineering.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1061/(ASCE)ST.1943-541X.0002288
Published
Experimental study on seismic performance of post-fire reinforced concrete frames
Su, M-N. & Xia, M., 2019, In: Engineering Structures.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2018.10.080
Published
Internal door closing habits in domestic premises: Results of a survey and the potential implications on fire safety
Hopkin, C., Spearpoint, M. & Wang, Y., 2019, In: Safety Science. 120, p. 44-56
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.ssci.2019.06.032
Published
Numerical Investigation of Static Resistance of Welded Planar Steel Tubular Joints Under In-plane and Out-of-plane Bending at Elevated Temperatures
Ozyurt, E. & Wang, Y., 2019, In: Engineering Structures. 199, 109622.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.engstruct.2019.109622
Published
Quantification of gas permeability of epoxy resin composites with graphene nanoplatelets
Zhang, Q., Wang, Y., Bailey, C., Istrate, O., Li, Z., Kinloch, I. & Budd, P., 2019, In: Composites Science and Technology. 184, 107875.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.compscitech.2019.107875
Published
Recycling of carbon fibre reinforced plastics by electrically driven heterogeneous catalytic degradation of epoxy resin
Zhu, J., Chen, P., Su, M., Pei, C. & Xing, F., 2019, In: Green Chemistry.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1039/C8GC03672A
Published
Residential occupant density distributions derived from English Housing Survey data
Hopkin, C., Spearpoint, M., Hopkin, D. & Wang, Y., 2019, In: Fire Safety Journal.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2019.01.010
Published
Synergistic enhancement of gas selectivity in thin film composite membranes of PIM-1
Borisov, I. L., Bakhtin, D. S., Luque-alled, J. M., Rybakova, A., Makarova, V., Foster, A. B., Harrison, W., Volkov, V. V., Polevaya, V., Gorgojo, P., Prestat, E., Budd, P. M. & Volkov, A. V., 2019, In: Journal of Materials Chemistry A.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1039/C8TA10691F
Published
The influence of multiaxial stress relaxation on component creep damage accumulation
Matev, N., Ainsworth, R. A., Su, M., Stevens, M. & Jappy, A., 2019, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP.
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
DOI: 10.1115/PVP2019-93096
2018
Published
Drag on pairs of square section obstacles in free-surface flows
Robertson, F. & Lane-Serff, G. F., 18 Dec 2018, In: Physical Review Fluids.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1103/PhysRevFluids.3.123802
Published
Experimental investigation of the performance of demountable composite beam shear connectors at ambient & elevated temperatures
Sencu, R. M. & Wang, Y., 7 Dec 2018, Proceedings of the Ninth International Conference on Advances in Steel Structures (ICASS’2018).
Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review
DOI: 10.18057/ICASS2018.142
Published
Improving the performance of composite floors subjected to post-earthquake fire
Suwondo, R., Cunningham, L., Gillie, M. & Bailey, C., Dec 2018, In: Fire Safety Journal.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2018.10.004
E-pub ahead of print
Behaviour of aluminium alloy plain and lipped channel columns
Zhu, J., Li, Z., Su, M. & Young, B., 26 Nov 2018, In: Thin-Walled Structures. 135, p. 306-316
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.tws.2018.11.010
E-pub ahead of print
Experimental study on seismic performance of post-fibre reinforced concrete frames
Li, L-Z., Liu, X., Yu, J-T., Lu, Z-D., Su, M., Liao, J-H. & Xia, M., 2 Nov 2018, In: Engineering Structures.
Research output: Contribution to journal › Article › peer-review
Published
Cyclic behaviour of double-tube buckling-restrained braces for boiler steel plant structures
Xu, F., Chen, J., Shu, K. & Su, M., 1 Nov 2018, In: Journal of Constructional Steel Research. 150, p. 556-569 14 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.jcsr.2018.08.022
Published
Composite Structures of Steel and Concrete: Fire Resistance
Wang, Y., Nov 2018, Composite Structures of Steel and Concrete. Johnson, R. (ed.). 4 ed. Chichester: John Wiley & Sons Ltd, p. 223-245 23 p.
Research output: Chapter in Book/Report/Conference proceeding › Chapter
Published
Experimental study of the influence of topcoat on insulation performance of intumescent coatings for steel structures
Xu, Q., Li, G., Jiang, J. & Wang, Y., Oct 2018, In: Fire Safety Journal. p. 25-38 14 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2018.08.006
Published
Quantifying effects of graphene nanoplatelets on slowing down combustion of epoxy composites
Zhang, Q., Wang, Y., Bailey, C., Yuen, R. K. K., Parkin, J. & Valles, C., 1 Aug 2018, In: Composites. Part B: Engineering. 146, p. 76-87
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.compositesb.2018.03.049
Published
An insight into structural design against deflection
Ji, T. & Cunningham, L., Aug 2018, In: Structures. 15
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.istruc.2018.08.001
Published
Resistance of Axially Loaded T- and X-Joints of Elliptical Hollow Sections at Elevated Temperatures – A Finite Element Study
Ozyurt, E. & Wang, Y., 1 Jun 2018, In: Structures. 14, p. 15-31 17 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.istruc.2018.01.004
Published
Non-linear FE modelling of plain and CFRP strengthened masonry panels under out-of-plane loads
Abdulla, K., Cunningham, L. & Gillie, M., 23 May 2018, In: Masonry International. 30, 3, p. 61 70 p.
Research output: Contribution to journal › Article › peer-review
Published
The ICCP-SS Technique for Retrofitting Reinforced Concrete Compressive Members subjected to Corrosion
Zhu, J., Su, M., Huang, J., Ueda, T. & Xing, F., 10 Apr 2018, In: Construction and Building Materials. 167, p. 669-679 11 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.conbuildmat.2018.01.096
Published
The effect of load-induced thermal strain on flat slab behaviour at elevated temperatures
Al Hamd, R. K. S., Gillie, M., Warren, H., Torelli, G., Stratford, T. & Wang, Y., 1 Apr 2018, In: Fire Safety Journal. 97, p. 12-18 7 p.
Research output: Contribution to journal › Article › peer-review
DOI: 10.1016/j.firesaf.2018.02.004

Previous 1 2 Next