Materials Engineering

Publications

  1. 2019
  2. Accepted/In press

    Composite super-moiré lattices in double aligned graphene heterostructures

    Wang, Z., Wang, Y. B., Yin, J., Tovari, E., Yang, Y., Lin, L., Holwill, M., Birkbeck, J., Perello, D., Xu, S., Zultak, J., Gorbachev, R., Kretinin, A., Taniguchi, T., Watanabe, K., Morozov, S., Andelkovic, M., Milovanovic, S., Covaci, L., Peeters, F. M. & 6 othersMishchenko, A., Geim, A., Novoselov, K., Fal'ko, V., Knothe, A. & Woods, C., 16 Aug 2019, (Accepted/In press) In : Science Advances.

    Research output: Contribution to journalArticle

  3. Published

    Investigation of Thermal Stability of Non-Newtonian Melt Flows

    Abeykoon, C., Kelly, A. L. & Wilkinson, A., 15 Aug 2019, Investigation of Thermal Stability of Non-Newtonian Melt Flow. Madrid, Spain: The 5th World Congress on Mechanical, Chemical, and Material Engineering

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  4. E-pub ahead of print

    Mechanical performance and microstructural characterisation of titanium alloy-alloy composites built by wire-arc additive manufacture

    Davis, A. E., Breheny, C. I., Fellowes, J., Nwankpa, U., Martina, F., Ding, J., Machry, T. & Prangnell, P. B., 14 Aug 2019, In : Materials Science and Engineering: A . 765, p. 138289

    Research output: Contribution to journalArticle

  5. Accepted/In press

    Graphene–aramid nanocomposite fibres via superacid co-processing

    Roberts, A., Kelly, P., Bain, J., Morrison, J., Wimpenny, I., Barrow, M., Woodward, R. T., Gresil, M., Blanford, C. F., Hay, S., Blaker, J., Yeates, S. & Scrutton, N., 13 Aug 2019, (Accepted/In press) In : Chemical Communications.

    Research output: Contribution to journalArticle

  6. Accepted/In press

    Relationship between Interaction of Bending Stiffness of Component Yarns and the Structure of Fancy Bouclé and Semi-bouclé Yarns

    Alshukur, M., Fotheringham, A. & Gong, H., 8 Aug 2019, (Accepted/In press) In : Fibers and Polymers.

    Research output: Contribution to journalArticle

  7. Accepted/In press

    Mineral Precipitation in Fractures and Nanopores within Shale Imaged Using Time-Lapse X-ray Tomography

    Ma, L., Godinho, J. R. A., Chai, Y., Storm, M. & Burnett, T., 6 Aug 2019, (Accepted/In press) In : Minerals. 9, 8

    Research output: Contribution to journalArticle

  8. Accepted/In press

    Corrosion Assessment of ASME Qualified Welding Procedures for Grade 2101 Lean Duplex Stainless Steel

    Guilherme, L. H., Reccagni, P., Benedetti, A., Fugivara, C. S. & Engelberg, D., 4 Aug 2019, (Accepted/In press) In : Corrosion.

    Research output: Contribution to journalArticle

  9. E-pub ahead of print

    The size dependent strength of Fe, Nb and V micropillars at room and low temperature

    Yilmaz, H., Williams, C. J., Risan, J. & Derby, B., 2 Aug 2019, In : Acta Materialia. p. 100424

    Research output: Contribution to journalArticle

  10. Published

    A heparin-functionalized woven stent graft for endovascular exclusion

    Liu, Z., Zheng, Z., Chen, K., Li, Y., Wang, X. & Li, G., 1 Aug 2019, In : Colloids and Surfaces B: Biointerfaces. 180, p. 118-126

    Research output: Contribution to journalArticle

  11. Published

    Co-electrospraying of tumour cell mimicking hollow polymeric microspheres for diffusion magnetic resonance imaging

    Zhou, F. L., Wu, H. H., McHugh, D. J., Wimpenny, I., Zhang, X., Gough, J. E., Hubbard Cristinacce, P. L. & Parker, G. J. M., 1 Aug 2019, In : Materials Science and Engineering C. 101, p. 217-227 11 p.

    Research output: Contribution to journalArticle

Previous 1 2 3 4 5 6 7 8 ...82 Next
Return to faculty and school overview